Best selling products

Solo Seat Coil Spring,Black 3"Length Custom Use Heavy Duty Spring Steel

• Made of special gauge spring steel
• Carefully coiled to ensure the proper amount of tension
• See below for availability of finishes and spring heights
• Sold Each

V-FACTOR
Black, 3 height
(Imported)

Solo Seat Coil Spring,Copper 2"Length,Custom Seat Use Heavy Duty Spring Steel

• Made of special gauge spring steel
• Carefully coiled to ensure the proper amount of tension
• See below for availability of finishes and spring heights
• Sold Each

V-FACTOR
Antique Copper Plated, 2 height
(Imported)

Quick Release Seat Screw Kit Most Models 73/L* W/1/4-20 And 1/4-28 Screws

• Beautify and simplify at the same time
• Hide the rear seat-mounting tab with the die cast cover and use the knurled seat screw for toolless access
• Includes one smooth top seat screw with 1/4-28 thread that fits most models 1973/1995 and one smooth top seat screw with 1/4-20 thread that fits most models 1996/Later
• Instructions included

V-FACTOR
Chrome Plated Screw Kit
Fits most models with rear tab seat mount 1973/Later
(Imported)

Solo Seat Coil Spring,Chrome 2" Length Custom Seat Use Heavy Duty Spring Steel

• Made of special gauge spring steel
• Carefully coiled to ensure the proper amount of tension
• See below for availability of finishes and spring heights
• Sold Each

V-FACTOR
Triple Chrome Plated, 2 height
(Imported)

Torsion Type Solo Seat Spring 2" Custom Seat Use, Chrome Plt Heavy Duty Spring Steel

• Heavy-duty spring steel
• 2 height
• Cool old school look for solo seats

V-FACTOR
Chrome Plated Spring
Sold Each, (Imported)

Seat Mount Part,Solo Spring 5" Custom Seat Use Chrome Plated Special Gauge Spring Steel

• Made of special gauge spring steel
• Carefully coiled to ensure the proper amount of tension
• See below for availability of finishes and spring heights
• Sold Each

V-FACTOR
Triple Chrome Plated, 5 height
(Imported)

Weld-On Solo Seat Brackets U/W Two Hardbody Mini Shocks Fits Most Solo Seats

• Includes bracket and hardware
• Mini shocks sold separately

HARDBODY
Dual Mount
Fits most aftermarket solo seats

Pillion Pad W/Saddle Bags For Custom Use Suction Cup Installation

• One piece pillion and saddlebags
• Pillion pad measures 10 long x 6 wide x 1 3/4 thick
• Saddlebags measure 7 1/4 wide x 2 1/2 thick x 8 tall
• Suction cup installation for easy on and off

Black Leather One Piece Pillion & Saddlebags

Mustang Vintage Solo Seat Fits Sportster 2004/Later With 2.1/3.3 Gal Tank Mustang.76157

• This smooth Naugahyde covered seat features a braided edge skirt
• Built on a powder coated steel baseplate that is carpeted to protect the fender
• Driver seat measures 12 ¹/₂ wide and is available for 3.3 gallon and 4.5 gallong tanks
• Passenger seat measures 8 wide

Mustang
Naugahyde Solo Seat
Fits 3.3 gallon tank on Sportster 2004/Later

13"Wide Metal Seat Pan Custom Use Painted Black

• Seat pans ready for your custom upholstery
• Two versions to fit your needs
• 13 gauge pans are perfect for strength and durability
• Welded in place spring mount studs are 5/16-18 on 6 3/4 centers
• Front seat hinge studs are 5/16-18 on 3 1/4 centers

HARDBODY
Black Painted Metal Seat Pan
13 wide x 14 long
(Imported)

Saddlebag Lid Cvr,Blk Prl Stud Fits Fl Touring Mdls 1993/L* W/ Stock Hd Hard Bags #77600

• Protect your saddlebag lids from scuffs and scratches
• Made of form fitted vinyl
• Available in plain or studded

Mustang
Black Pearl Studded Pair
Fits L Touring models with stock HD hard bags 1993/2009

Luggage Rack,Fender Mount Spt 04/L* W/Solo Seat Four Bar,Chrome Plated

• Made from 3/8 O.D. solid steel for strength
• eatures foam padding to prevent paint damage to fender
• Does not require drilling the fender
• Includes 1/4-20 & 1/4-28 front mounting screws

V-FACTOR
9 3/4 x 6 Rack
Fits Sportster 2004/Later
5 1/2 between mount holes
Requires solo seat

Luggage Rack,Fender Mount Dyna 91/04 (Ex Fxdwg) W/Solo Seat 4 Bar Chrome

• Made from 3/8 O.D. solid steel for strength
• eatures foam padding to prevent paint damage to fender
• Does not require drilling the fender
• Includes 1/4-20 & 1/4-28 front mounting screws

V-FACTOR
9 3/4 x 6 Rack
Fits Dyna 1991/2004 (except XDWG)
Requires solo seat

V-FACTOR
Chrome Plated Left Bracket
Fits all Softail models 1984/1999
(Imported)

Top Engine Mount Heavy Duty Cp Softail Models 1984/1999 W/Horn Mount Rpls Hd 16852-83

• Replacement heavy-duty mount is ¹/₄ thick
• Complete with choke/horn bracket, mounting hardware and brackets

V-FACTOR
Chrome Plated
Fits Softail models 1984/1999
Replaces HD# 16852-83
(Imported)

Hi-Way Footrest Mounting Kit Dyna Mdls 91/L*(Ex Fxdwg) Cp Steel Replaces Hd 49019-95

• The mid-bike position of the footpegs is fine for around town when constant shifting and braking is required, but when you are out on the highway on those long hauls and need to stretch your legs out, this kit is a must
• Use with any type of footrest with a ⁷/₁₆ wide male mount

V-FACTOR
Chrome Plated Kit
Fits Dyna models 1991/Later (except XDWG)
Replaces HD# 49019-95
(Imported)

Footrests,Stock Style Extended Male Mount 1"Longer Than Stock W/Black Ribbed Rubber

• Over 1 longer than stock footrests so your feet will rest better when using large gas tanks and/or air cleaners
• OE type ribbed rubber male mount

V-FACTOR
Extended ootrest with black rubber ends
(Imported)

Footrests,O Ring Small Od Male Mount For All Models Replaces Hd 50901-84T..Chromed

• Die cast footrest pairs in the popular O-Ring style
• Replacement neoprene O-Rings for pegs available
• Will fit many stock and custom applications

V-FACTOR
Chrome Plated Small Diameter Pair with Male Mount
Replaces HD# 50901-84T
(Imported)

Passenger Peg Mt Kit,Black Touring Models 1993-Later, 50198-97B

• Remove those oversized footboards on your touring model and replace them with these footpeg mount kits
• These offer a sport-touring look and accept the male mount footpegs found in the frame and body section
• Three adjustable height positions give passenger added comfort
• Includes mounting hardware

V-FACTOR
Black Kit
Fits Touring models 1993-Later
Replaces HD# 50198-97B

Footpeg Mount Pair Large Od Female Chrome Plated
V-FACTOR
Replacement Part
Chrome Plated Large O.D. emale ootpeg Mount Pair

Billet Knurled Footrests,Black Custom Use 3/8-16 Mount Holes

• CNC machined from billet aluminum
• old-up mounts attach with 3/8-16 bolt
• ootrests are 1 diameter
• Total length with mount is 5 3/4
• ootrests alone measure 4 in length
• Knurled for custom look and to keep feet on pegs
• Sold in pairs

V-FACTOR
Billet Aluminum Black ootrest Pair
Fits all models

Footpegs, Speed Line All W/Male Mounts Rpls Hd 50211-04

• Add the custom look of these Street Glide^® style footboards available with chrome or black pans to your touring model
• Chrome Trim Ring. Not available on late model boards from the factory
• oot gripping rubber pads and chrome or black pans offer great looks and great feel
• When the passenger footboards are flipped up, they reveal the aluminum pans for a show bike look

V-FACTOR
Male Mount oot Pegs with Chrome Pans
Fits all models
Replaces HD# 50211-04

Kick Stand Bumper Pad Dresser Models 2007/Later* Rpls Hd 50245-07

• Protects the outer primary cover from damage when the jiffy stand is in the retracted position
• Quarter shown for size reference

V-FACTOR
Bumper Pad (sold each)
Fits Dresser models 2007/Later
Replaces HD# 50245-07
(Imported)

Adjust Jiffy Stand Leg Stop Fl Fx 4 Spd 1958/1984(Ex Fxwg) St 1989/2006 Chrome Plated

• Eliminate Jiffy Stand rattle and protect your primary cover with this 5/16 thick steel Jiffy Stand Stop
• A nylon tip screw provides proper Jiffy Stand adjustment and eliminates the need for the glue on rubber pad on primary cover that constantly falls off

V-FACTOR
Chrome Plated Leg
Fits L & X (except XWG) with stock leg bracket 1958/1984, Softail with stock leg bracket 1989/2006
(Imported)

Jiffy Stand Spring Mount Plate Fl Fx 36/86,Softail 1984/1990 Chrome Replaces Hd 50036-36

• Top quality steel Spring Mounts
• Exceeds OEM specifications at a fraction of the cost

V-FACTOR
Chrome Plated Plate
Fits L & X 1936/1986 and Softail 1984/1990
Replaces HD# 50036-36
(Imported)

Jiffy Stand Spring Chrome St 85/06 Fxwg 85/86 Fxr 91/94 Flt Flht 91/98 Spt 85/06

• Top quality chrome plated Jiffy Stand Springs
• Exceed OEM specifications at a fraction of the cost
• Length is given from inside of hook to inside of hook

V-FACTOR
Chrome Plated 3 7/8 long Spring
Fits Softail 1985/2006, XWG 1985/1986, FXR 1991/1994, FLT & FLHT 1991/1998, Sportster 1985/2006
Replaces HD# 50005-85A

Kickstand Spring,Chrome Dresser Mdls 07/L*,St 07/L* Rpls Hd 49725-07A

• Top quality chrome plated Jiffy Stand Springs
• Exceed OEM specifications at a fraction of the cost
• Length is given from inside of hook to inside of hook

V-FACTOR
Chrome Plated 3 3/4 long Spring
Fits Dresser models 2007/Later & Softail models 2007/Later
Replaces HD# 49725-07A

Jiffy Stand,Flat Bottom Stk Lg Sportster 1957/Early 1984 Stock Length Rpls Hd 50006-77A
Exceeds OEM specifications at a fraction of the cost. See below for availability of lengths.V-FACTOR
Chrome Plated & Stock Length
Fits Sportster 1957/Early 1984
Replaces HD# 50006-77A & 50062-52A
(Imported)

Oe Style Kickstand,Chrome Dresser Models 2007/Later* Rpls Hd 50075-07A

• aithful reproduction of OE style kickstand
• Constructed from hardened steel for extreme durability
• Also availabel in a 1 undersize for models with lowered suspension

V-FACTOR
Chrome Plated 13 (Stock) Length Kickstand
Fits Dresser models 2007/Later
Replaces HD# 50075-07A
(Imported)