Drag Specialties

Filter

Filter

Brand

clear
48 products

48 products

Quick view
JIMS Tappet Position Holding Tool, made in the usa, specific application
Jims
$88.95
Sold Out
JIMS Pinion Gear Lock Tool, Black, Harley 91 - 99 XL Buell 94-99
Jims
$74.95
Quick view
JIMS 5-Speed Main Case Seal Installer Tool, made in the usa, specific application
Jims
$98.95
Quick view
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)
Jims
$43.95
Quick view
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer
Jims
$37.95
Sold Out
JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL
Jims
$120.95
Quick view
JIMS Tappet Pump And Test Stand, Hydraulic, Harley 99-15 FX 99-15 FL
Jims
$402.95
Sold Out
JIMS Replacement Drive For Cam Bearing Installation Tool PART #3801-0160, Harley 99-15 FX 99-15 FL
Jims
$106.95
Quick view
JIMS Primary Locking Bar, Harley 06-15 FX 07-15 FL
Jims
$75.95
Sold Out
JIMS Primary Locking Bar, Harley 07-15 FL
Jims
$77.95
Quick view
JIMS Primary Cover Inspection Plug Tool, made in the usa, Each, specific application, Harley 57 - 90 XL
Jims
$38.95
Sold Out
JIMS Pinion Gear Lock Tool, Harley 00 - 15 XL Buell 00-09
Jims
$74.95
Quick view
JIMS Mini Valve Spring Tester, made in the usa, Each
Jims
$224.95
Quick view
JIMS Main Drive Gear Tool, Harley 1980-2006 FLT, 86-06 FLST,FXST
Jims
$461.95
Sold Out
JIMS Main Drive Gear Seal Installer, Harley 06-15 FX 07-15 FL
Jims
$162.95
Quick view
JIMS Main Drive Gear Bearing/Seal Installation Tool, Harley 06-15 FX 07-15 FL
Jims
$161.95
Quick view
JIMS Lockdown Axle Kit, Harley 82-00 FX 80-01 FL 87 - 94 XL
Jims
$123.95
Quick view
JIMS Main Drive Gear Bearing Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$297.95
Quick view
JIMS Lockdown Axle Kit, Harley 73-86 FX 73-84 FL 73 - 04 XL
Jims
$123.95
Quick view
JIMS Inner Primary Cover Bearing And Seal Remover/Installer Tool, Black, Each, specific application, Harley 84-06 FX 85-06 FL 87 - 94 XL
Jims
$263.95
Quick view
JIMS Inner Cam Bearing Removal Tool, Harley 06-15 FX 07-15 FL
Jims
$387.95
Quick view
JIMS Ignition Switch Housing Alignment Tool, Harley 14-15 FL
Jims
$136.95
Quick view
JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR
Jims
$136.95
Sold Out
JIMS Hydraulic Balancer Retainer Tool, made in the usa, Pair, specific application, Harley 00-15 FX 00-15 FL
Jims
$48.95
Quick view
JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL
Jims
$77.95
Quick view
JIMS Fuel Pump Retainer Remover Tool, made in the usa, specific application, Harley 08-15 FL
Jims
$220.95
Quick view
JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL
Jims
$42.95
Quick view
JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL
Jims
$90.95
Quick view
JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL
Jims
$67.95
Quick view
JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$233.95
Quick view
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$269.95
Quick view
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover/Installer, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$383.95
Sold Out
JIMS Cruise Drive Vise Stand, made in the usa, Each, specific application
Jims
$122.95
Quick view
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL
Jims
$108.95
Quick view
JIMS Crankcase Bearing Remover And Installer, Black, made in the usa, specific application, Harley 03-10 FX 03-10 FL
Jims
$275.95
JIMS Tappet Position Holding Tool, made in the usa, specific application Garage and Shop Jims - K and G Cycles
Jims

JIMS Tappet Position Holding Tool, made in the usa, specific application

DS-38010275

$88.95

In Stock

Save $-88.95
/
Shipping calculated at checkout.
JIMS Tappet Position Holding Tool, made in the usa, specific application
  • Safely stores anti-rotation pins and tappets for proper and accurate installation
  • Locations of the tappets are marked on the tool; preventing damage after being removed from the engine
  • Made in the U.S.A.
JIMS 5-Speed Main Case Seal Installer Tool, made in the usa, specific application Garage and Shop Jims - K and G Cycles
Jims

JIMS 5-Speed Main Case Seal Installer Tool, made in the usa, specific application

DS-38020063

$98.95

In Stock

Save $-98.95
/
Shipping calculated at checkout.
JIMS 5-Speed Main Case Seal Installer Tool, made in the usa, specific application
  • Ensures correct alignment, seal protection and depth when installing the seal
  • Made in the U.S.A.
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042) Garage and Shop Jims - K and G Cycles
Jims

JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)

DS-38110039

$43.95

In Stock

Save $-43.95
/
Shipping calculated at checkout.
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)
  • Updates discontinued PART #DS-196295 (Jim's #1042) for use with 25mm wheel bearing found on 07-15 models
  • Made in the U.S.A.
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer Garage and Shop Jims - K and G Cycles
Jims

JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer

DS-38010171

$37.95

In Stock

Save $-37.95
/
Shipping calculated at checkout.
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer
  • Use for removing and installing valve guides
  • Adapters are supported by a stand that makes it easy to press valve guides in and out
  • A special guide alignment shaft holds the right angle for best possible guide installation
  • Save time and money on seat grinding by installing the guides in line with the valve seats
  • Kit includes base assembly, six adapters, three assembly pilots, three inserts and instructions
  • Adapters for working on 7mm valve guides available separately
  • Made in the U.S.A.
JIMS Tappet Pump And Test Stand, Hydraulic, Harley 99-15 FX 99-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Tappet Pump And Test Stand, Hydraulic, Harley 99-15 FX 99-15 FL

DS-38010192

$402.95

In Stock

Save $-402.95
/
Shipping calculated at checkout.
JIMS Tappet Pump And Test Stand, Hydraulic, Harley 99-15 FX 99-15 FL
  • Allow you to fill hydraulic tappets before assembling valve train
  • Helps diagnose loose or spongy tappets that could eventually lead to bleed-down issues or sticky tappets that won't pump up due to poor hydraulic unit fitment
  • Made in the U.S.A.
JIMS Primary Locking Bar, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Primary Locking Bar, Harley 06-15 FX 07-15 FL

DS-38020026

$75.95

In Stock

Save $-75.95
/
Shipping calculated at checkout.
JIMS Primary Locking Bar, Harley 06-15 FX 07-15 FL
  • Locks primary for service work
  • Made in the U.S.A.
JIMS Primary Cover Inspection Plug Tool, made in the usa, Each, specific application, Harley 57 - 90 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Primary Cover Inspection Plug Tool, made in the usa, Each, specific application, Harley 57 - 90 XL

DS-38020004

$38.95

In Stock

Save $-38.95
/
Shipping calculated at checkout.
JIMS Primary Cover Inspection Plug Tool, made in the usa, Each, specific application, Harley 57 - 90 XL
  • Use this tool to remove and install primary inspection plug
  • Made in the U.S.A.
JIMS Mini Valve Spring Tester, made in the usa, Each Garage and Shop Jims - K and G Cycles
Jims

JIMS Mini Valve Spring Tester, made in the usa, Each

DS-38010179

$224.95

In Stock

Save $-224.95
/
Shipping calculated at checkout.
JIMS Mini Valve Spring Tester, made in the usa, Each
  • Works with bench vise, arbor, screw hydraulic or drill press
  • Cylinder body and piston are manufactured from 2024 aluminum with a steel spring plate mandrel
  • Precision 0-1000 psi gauge is covered with a protective rubber boot to reduce shock to gauge during handling and use
  • Made in the U.S.A.
JIMS Main Drive Gear Tool, Harley 1980-2006 FLT, 86-06 FLST,FXST Garage and Shop Jims - K and G Cycles
Jims

JIMS Main Drive Gear Tool, Harley 1980-2006 FLT, 86-06 FLST,FXST

DS-38020022

$461.95

In Stock

Save $-461.95
/
Shipping calculated at checkout.
JIMS Main Drive Gear Tool, Harley 1979-2006 FLT, 86-06 FLST,FXST
  • Use to remove and install the main drive gear
  • Also installs the main bearing without removing transmission case
  • This tool will NOT damage bearing or main drive gear during installation
  • Made in the U.S.A.
JIMS Main Drive Gear Bearing/Seal Installation Tool, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Main Drive Gear Bearing/Seal Installation Tool, Harley 06-15 FX 07-15 FL

DS-38020024

$161.95

In Stock

Save $-161.95
/
Shipping calculated at checkout.
JIMS Main Drive Gear Bearing/Seal Installation Tool, Harley 06-15 FX 07-15 FL
  • Install both bearings and seal with use of a 1-ton press
  • Holds bearings and seal square to its bore, eliminating any marring
  • Install bearings and seal to correct depth
  • Made in the U.S.A.
JIMS Lockdown Axle Kit, Harley 82-00 FX 80-01 FL 87 - 94 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Lockdown Axle Kit, Harley 82-00 FX 80-01 FL 87 - 94 XL

DS-02140839

$123.95

In Stock

Save $-123.95
/
Shipping calculated at checkout.
JIMS Lockdown Axle Kit, Harley 82-00 FX 80-01 FL 87 - 94 XL
  • Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components
  • Swingarm end caps fit more precisely into the end of the swingarm, providing more support of the adjuster
  • Axle nut washer positions axle and allows for better locating during installation and adjustment
  • Made in the U.S.A
JIMS Main Drive Gear Bearing Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Main Drive Gear Bearing Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38020025

$297.95

In Stock

Save $-297.95
/
Shipping calculated at checkout.
JIMS Main Drive Gear Bearing Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Safely installs new main transmission case bearing; does not remove bearing
  • Holds bearing square to its bore, eliminating any marring of bearing bore
  • Made in the U.S.A.
JIMS Lockdown Axle Kit, Harley 73-86 FX 73-84 FL 73 - 04 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Lockdown Axle Kit, Harley 73-86 FX 73-84 FL 73 - 04 XL

DS-02140838

$123.95

In Stock

Save $-123.95
/
Shipping calculated at checkout.
JIMS Lockdown Axle Kit, Harley 73-86 FX 73-84 FL 73 - 04 XL
  • Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components
  • Swingarm end caps fit more precisely into the end of the swingarm, providing more support of the adjuster
  • Axle nut washer positions axle and allows for better locating during installation and adjustment
  • Made in the U.S.A
JIMS Inner Primary Cover Bearing And Seal Remover/Installer Tool, Black, Each, specific application, Harley 84-06 FX 85-06 FL 87 - 94 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Inner Primary Cover Bearing And Seal Remover/Installer Tool, Black, Each, specific application, Harley 84-06 FX 85-06 FL 87 - 94 XL

DS-38010092

$263.95

In Stock

Save $-263.95
/
Shipping calculated at checkout.
JIMS Inner Primary Cover Bearing And Seal Remover/Installer Tool, Black, Each, specific application, Harley 84-06 FX 85-06 FL 87 - 94 XL
  • Safely removes and installs inner primary bearing (OEM #9135) without any damage to new bearing by pushing on outer perimeter of bearing
  • Also removes and installs inner primary bearing and seal that transmission mainshaft passes through (OEM #12052A)
  • Optional upgrade PART #s 3802-0060 and 3802-0061 allow for use of PART #3801-0092 on 06 Dyna and 07-16 Bid Twin Models
  • Made in the U.S.A.
JIMS Inner Cam Bearing Removal Tool, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Inner Cam Bearing Removal Tool, Harley 06-15 FX 07-15 FL

DS-38010061

$387.95

In Stock

Save $-387.95
/
Shipping calculated at checkout.
JIMS Inner Cam Bearing Removal Tool, Harley 06-15 FX 07-15 FL
  • Used to remove inner cam bearing without damaging the crankcase
  • Tool is also designed to keep rollers from falling into the crankcase
  • Comes with instructions
  • Made in the U.S.A.
JIMS Ignition Switch Housing Alignment Tool, Harley 14-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Ignition Switch Housing Alignment Tool, Harley 14-15 FL

DS-38070276

$136.95

In Stock

Save $-136.95
/
Shipping calculated at checkout.
JIMS Ignition Switch Housing Alignment Tool, Harley 14-15 FL
  • Align ignition switch housing as retaining screws are being torqued
  • Also used to position switch in the correct orientation for properly activating the fork lock
  • Proper alignment of the switch will extend the life of the ignition switch housing
  • Made in the U.S.A.
JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR Garage and Shop Jims - K and G Cycles
Jims

JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR

DS-38070050

$136.95

In Stock

Save $-136.95
/
Shipping calculated at checkout.
JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR
  • Align ignition switch housing as retaining screws are being torqued
  • Also used to position switch in the correct orientation for properly activating the fork lock
  • Proper alignment of the switch will extend the life of the ignition switch housing
  • Made in the U.S.A.
JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL

DS-38050107

$77.95

In Stock

Save $-77.95
/
Shipping calculated at checkout.
JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL
  • Machine steel construction
  • Loosens/tightens and torques to specs 11/2" stem nut without radio removal
  • Saves up to 45 minutes for an experienced mechanic
  • Made in the U.S.A.
JIMS Fuel Pump Retainer Remover Tool, made in the usa, specific application, Harley 08-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Fuel Pump Retainer Remover Tool, made in the usa, specific application, Harley 08-15 FL

DS-38040009

$220.95

In Stock

Save $-220.95
/
Shipping calculated at checkout.
JIMS Fuel Pump Retainer Remover Tool, made in the usa, specific application, Harley 08-15 FL
  • Removes/installs retaining ring holding fuel pump
  • Use for quick and easy service of fuel filter and other fuel-related parts
  • Heavy-duty construction
  • Made in the U.S.A.
JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL

DS-38010195

$42.95

In Stock

Save $-42.95
/
Shipping calculated at checkout.
JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL
  • Allows riders and mechanics to quickly and safely remove engine oil level dipstick that lies precariously close to a scorching hot exhaust pipe
  • Also aids riders with limited hand strength in easily checking their oil level
  • Has square hole for 3/8" ratchet fitment, 7/8" hex for wrench fitment and cutout for clearance around exhaust pipe
  • Made in the U.S.A.
JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL

DS-38010045

$90.95

In Stock

Save $-90.95
/
Shipping calculated at checkout.
JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL
  • Assembly tool features a captive hardened ball bearing dimensionally set 1" from top of tool
  • Made of high tensile steel
  • Works on all Evolution Big Twin and XL models
  • Made in the U.S.A.
JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL

DS-38500121

$67.95

In Stock

Save $-67.95
/
Shipping calculated at checkout.
JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL
  • Installs fragile exhaust seal with ease and will position seal evenly to exhaust port of head
  • Can be used with exhaust flange nuts or JIMS handle PART #DS-196042; sold separately
  • Made in the U.S.A.
JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38010175

$233.95

In Stock

Save $-233.95
/
Shipping calculated at checkout.
JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Developed to specifically work with H-Ds 6-speed transmission bearings
  • Driver style seal installer installs main seal to correct depth without applying any stress to bearings or seals, and won't damage bearings, unlike a pushing or pull type of installer
  • Made in the U.S.A.
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38020042

$269.95

In Stock

Save $-269.95
/
Shipping calculated at checkout.
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Removes main drive gear from main bearing correctly while in transmission case
  • Eliminates need for arbor press and risk of case damage
  • Made in the U.S.A.
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover/Installer, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cruise Drive 6-Speed Trap Door Bearing Remover/Installer, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38020043

$383.95

In Stock

Save $-383.95
/
Shipping calculated at checkout.
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover/Installer, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Accurately installs/removes lubed ball bearing into transmission trap door
  • No arbor press needed
  • Made in the U.S.A.
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL

DS-38010060

$108.95

In Stock

Save $-108.95
/
Shipping calculated at checkout.
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL
  • Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts
  • Made of non-marring Delrin
  • Comes with instructions
  • Made in the U.S.A.
JIMS Crankcase Bearing Remover And Installer, Black, made in the usa, specific application, Harley 03-10 FX 03-10 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Crankcase Bearing Remover And Installer, Black, made in the usa, specific application, Harley 03-10 FX 03-10 FL

DS-38010012

$275.95

In Stock

Save $-275.95
/
Shipping calculated at checkout.
JIMS Crankcase Bearing Remover And Installer, Black, made in the usa, specific application, Harley 03-10 FX 03-10 FL
  • For use on pinion and sprocket side main case bearings on 03-10 Twin Cam "A"
  • Will also work on sprocket side main case bearing on 03-10 Twin Cam "B" motors
  • Made in the U.S.A.