Drag Specialties

KHROME WERKS Chrome 16" Ape Hanger 1" Handlebars, center width 8", Natural, drilled, end rise rise height 13.75", overall width 35.25", Harley 84-16 FX 84-16 FL 86 - 16 XL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, Natural, drilled, end rise rise height 10", Harley 86-13 FL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Fat Ape Hanger 1 1/4" Handlebars, Natural, overall width 35", Harley 08-13 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome Drag Bar 1" Handlebars, center width 8.25", Natural, end rise rise height 0"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome Low-Rise Drag Bar 1" Handlebars, center width 6.5", Natural, end rise rise height 2.75", overall width 26.5", pullback sweep 5.5"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 16" Fat Ape Hanger 1 1/4" Handlebars, Natural, center width 7.5", overall width 35", pullback sweep 7.75", Harley 08-16 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome Bad Boy 1" Handlebars, center width 10"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

Finish	Chrome
Features	Knurled Center
Type/Bend	Bad Boy
Style	Dimpled
Rise	6"
End Rise	6"
Width	31-1/4"
Center Width	3-1/2"
Pullback/Sweep	4-1/4"
Height	6"
Handlebar Diameter	1"
Controls Diameter	1"
Clamping Diameter	1"
Material	Steel

KHROME WERKS Chrome OEM Replacement 1" Handlebars, Dimpled, Heritage Style, Springer, center width 9.25", Natural, overall width 30.25", Harley 97-07 FL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome OEM Replacement 1" Handlebars, Dimpled, Heritage Style, center width 7.5", Natural, end rise rise height 11.5", overall width 31.5", pullback sweep 5.25", specific application, Harley 87-07 FL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 10.25"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome OEM Replacement 1" Handlebars, Dimpled, Super Glide-style, center width 4.75", overall width 27.25", specific application, Harley 87-91 FX 83 - 08 XL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 18" Ape Hanger 1" Handlebars, Natural, end rise rise height 15.5", overall width 35.25", pullback sweep 6.75"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 10.25"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 16" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 13.75", overall width 35.25", pullback sweep 6.75"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 10.25"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Trailer Wiring Connector Kit With Isolator, Harley 97-13 FL

• To be used with current Khrome Werks trailer hitches
• Plug-and-play wiring harness features an isolator module with a fused, separate circuit from battery positive to power the trailer lighting; works through built-in relays and prevents overloading of factory-lighting circuit
• 5-pin, die-cast, automotive style connector
• Mounts using mounting bracket that bolts directly to the safety chain bracket on current production Khrome Werks trailer hitches
• An isolator is a must for 2009 and later Harleys pulling trailers with conventional incandescent lighting (higher amperage requirements than trailers with LED lighting)
• Made in the U.S.A.

KHROME WERKS Trailer Wiring Connector Kit With Isolator, Harley 10-13 FL

• To be used with current Khrome Werks trailer hitches
• Plug-and-play wiring harness features an isolator module with a fused, separate circuit from battery positive to power the trailer lighting; works through built-in relays and prevents overloading of factory-lighting circuit
• 5-pin, die-cast, automotive style connector
• Mounts using mounting bracket that bolts directly to the safety chain bracket on current production Khrome Werks trailer hitches
• An isolator is a must for 2009 and later Harleys pulling trailers with conventional incandescent lighting (higher amperage requirements than trailers with LED lighting)
• Made in the U.S.A.

KHROME WERKS Trailer Wiring Connector Kit With Isolator, Harley 09-13 FL

• To be used with current Khrome Werks trailer hitches
• Plug-and-play wiring harness features an isolator module with a fused, separate circuit from battery positive to power the trailer lighting; works through built-in relays and prevents overloading of factory-lighting circuit
• 5-pin, die-cast, automotive style connector
• Mounts using mounting bracket that bolts directly to the safety chain bracket on current production Khrome Werks trailer hitches
• An isolator is a must for 2009 and later Harleys pulling trailers with conventional incandescent lighting (higher amperage requirements than trailers with LED lighting)
• Made in the U.S.A.

KHROME WERKS Plug-And-Play Trailer Wiring Kit, Harley 10-13 FL

• All kits include 6-pin Molex isolator, 15-amp fuse/fuse holder, two butt connectors and ring terminal (no converter needed)
• PART #3902-0159 also includes 4-wire, 56" harness with a flat 4-position connector
• PART #3902-0160 also includes 5-wire, 56" harness, 5-pin round connector set and bracket for KW hitches
• PART #3902-0161 also includes 4-wire, 56" harness with a flat 4-position connector
• PART #3902-0168 has an 8-pin multi-lock plug and also includes 4-wire, 48" harness with a flat 4-position connector
• PART #3902-0169 also includes 4-wire, 48" harness with a flat 4-position connector
• PART #3902-0182 has 8-pin multi-lock plugs and also includes 4-wire, 48" harness with a flat 4-position connector
• Made in the U.S.A.

KHROME WERKS Receiver Trailer Hitch, Harley 14-15 FL

• 11/4" receiver trailer hitches mount to frame struts and the saddlebag supports
• Does not interfere with accessories such as docking kits for sissy bars, racks and tour boxes
• Made from .125" 1020 steel tubing, robotic-welded and high-gloss black powder-coated
• Includes polished chrome-plated hitch, 17/8" ball and pin with hitch clip
• Optional chrome-plated 5-pin, die-cast, automotive-style connector set available separately; PART #3902-0069
• Made in the U.S.A.

KHROME WERKS Plug-And-Play Trailer Wiring Kit, Harley 97-15 FL

• All kits include 6-pin Molex isolator, 15-amp fuse/fuse holder, two butt connectors and ring terminal (no converter needed)
• PART #3902-0159 also includes 4-wire, 56" harness with a flat 4-position connector
• PART #3902-0160 also includes 5-wire, 56" harness, 5-pin round connector set and bracket for KW hitches
• PART #3902-0161 also includes 4-wire, 56" harness with a flat 4-position connector
• PART #3902-0168 has an 8-pin multi-lock plug and also includes 4-wire, 48" harness with a flat 4-position connector
• PART #3902-0169 also includes 4-wire, 48" harness with a flat 4-position connector
• PART #3902-0182 has 8-pin multi-lock plugs and also includes 4-wire, 48" harness with a flat 4-position connector
• Made in the U.S.A.

KHROME WERKS Plug-And-Play Trailer Wiring Kit, Each, Harley 14-15 FL

• All kits include 6-pin Molex isolator, 15-amp fuse/fuse holder, two butt connectors and ring terminal (no converter needed)
• PART #3902-0159 also includes 4-wire, 56" harness with a flat 4-position connector
• PART #3902-0160 also includes 5-wire, 56" harness, 5-pin round connector set and bracket for KW hitches
• PART #3902-0161 also includes 4-wire, 56" harness with a flat 4-position connector
• PART #3902-0168 has an 8-pin multi-lock plug and also includes 4-wire, 48" harness with a flat 4-position connector
• PART #3902-0169 also includes 4-wire, 48" harness with a flat 4-position connector
• PART #3902-0182 has 8-pin multi-lock plugs and also includes 4-wire, 48" harness with a flat 4-position connector
• Made in the U.S.A.