Drag Specialties

MAIER Windshield Mounting Hardware

• Universal kit can be used to mount OEM or Maier windshields
• Kit includes screws, nuts, and rubber and steel washers

BARON MIXTURE SCREW YAM, made in the usa

• Make adjusting your pilot jet's air/fuel mixture a breeze with this unique finger-turn pilot jet mixture screw
• Allow you to easily adjust air-fuel ratio for weather and altitude
• Enhance fuel efficiency while improving cold start-up and low end performance
• Do away with tiny screwdrivers and crawling around on your knees with this easy-to-operate part
• Sold individually
• Made in the U.S.A.

NOTE: Installation requires removal of mixture plug if your stock mixture screw has not been uncovered.

SLIPSTREAMER Classic Tapered Windshield Replacement Mounting Hardware, Tapered Fork, Honda 98-09, Kawasaki 96-09, Suzuki 01-04, Yamaha 98-09
SLIPSTREAMER Classic Tapered Windshield Replacement Mounting Hardware, Tapered Fork, Honda 98-09, Kawasaki 96-09, Suzuki 01-04, Yamaha 98-09

SLIPSTREAMER Replacement Hardware Kit, Honda 68-08, Kawasaki 73-11, Suzuki 72-15, Yamaha 71-90
SLIPSTREAMER Replacement Hardware Kit, Honda 68-08, Kawasaki 73-11, Suzuki 72-15, Yamaha 71-90

RACE TECH Shock Shaft Bushings, Front, Shock Bushing, Arctic Cat 06-08, Honda 82-09, Kawasaki 86-14, Suzuki 82-08, Yamaha 00-05

• Rebuild the seal head assembly for a fraction of the cost of new
• High-quality, low-friction, PTFE-coated shaft bushings for performance and longevity

WISECO PISTON Replacement Wrist Pin, OEM KTM 98-15, Yamaha 73-06

• Wiseco wrist pins are strong, lightweight and can be used with OEM pistons, too
• Wiseco 2-stroke pistons include a wrist pin unless indicated
• See price list on page ???

WISECO PISTON WISECO WRIST PIN, Wrist Pin, Arctic Cat 71-00, Suzuki 71-81, Yamaha 84-85

• Most Wiseco 2-cycle pistons are forged from high-silicone bar stock
• Greater strength and lower expansion at high temperatures
• Complete piston kits include High-Performance forged pistons, rings, wrist pins, circlips and top-end gasket kit for one complete engine
• All Wiseco High-Performance pistons are priced with rings, wrist pins and circlips
• Wiseco ring types are not interchangeable (i.e., CD is not interchangeable with LC) and fit only Wiseco pistons

WARNING: Wiseco pistons can be fitted only with Wiseco rings.

PROGRESSIVE SUSPENSION Doo Dad Switch, 6A, Black, Each, Universal, Toggle Switch
PROGRESSIVE SUSPENSION Doo Dad Switch, 6A, Black, Each, Universal, Toggle Switch

K & N UNIVERSAL, Black, flange id 2", lg od sm od 3" x 4" - 2 1/2" x 3 1/2", Gauze, Precharger, Kawasaki 86-01

• K N universal air filters come in three styles - round straight, oval tapered and round tapered
• All round straight types and oval tapered types have rubber end caps
• All round tapered types have chrome end caps
• All clamp directly to the carburetor throat, replacing the stock airbox and filter element
• Match the o.d. of your carb throat with the i.d. of the filter (given in inches and millimeters)
• See the CHEMICALS LUBES section for cleaners

UNIVERSAL PRECHARGERS

• This specially designed filter wrap is made to extend the service interval of a K N Filtercharger when used in very dusty conditions
• Made from a highly durable polyester material containing uniform micron openings; available in black only

K & N Universal Precharger, Black, 4" o.d. x 6" H, Polyester

• Designed to provide increased performance
• Pleated media provides a large filtration area offering long service intervals
• Multi-Layers of woven cotton gauze media offers excellent filtration
• Fit directly into OEM Airbox with application specific Sealing Bead to ensure a precise fit
• Fuel-Management modifications are not normally required for increased performance
• Washable and reusable, pre-oiled and ready to ride
• Made in the U.S.A. for over 45 years

PRECHARGERS

• Prechargers are designed to custom fit the filters listed (find filter number in application charts) or choose universal sizes as listed
• Available in red only for Honda, blue only for Kawasaki, yellow only for Suzuki and black only for Yamaha
• Extend service interval by prefiltering tiny contaminants when used in severe conditions
• Highly durable polyester material containing uniform micron openings will stop small dirt particles
• See LUBES section for cleaners and air filter care products
• Add only 10% restriction on airflow
• Designed to be run dry and can be cleaned with K N Filter Cleaner

K & N Universal Precharger, Black, 3 1/2" o.d. x 5" H, Polyester

• Designed to provide increased performance
• Pleated media provides a large filtration area offering long service intervals
• Multi-Layers of woven cotton gauze media offers excellent filtration
• Fit directly into OEM Airbox with application specific Sealing Bead to ensure a precise fit
• Fuel-Management modifications are not normally required for increased performance
• Washable and reusable, pre-oiled and ready to ride
• Made in the U.S.A. for over 45 years

PRECHARGERS

• Prechargers are designed to custom fit the filters listed (find filter number in application charts) or choose universal sizes as listed
• Available in red only for Honda, blue only for Kawasaki, yellow only for Suzuki and black only for Yamaha
• Extend service interval by prefiltering tiny contaminants when used in severe conditions
• Highly durable polyester material containing uniform micron openings will stop small dirt particles
• See LUBES section for cleaners and air filter care products
• Add only 10% restriction on airflow
• Designed to be run dry and can be cleaned with K N Filter Cleaner

K & N UNIVERSAL, Black, flange id 1 3/8", length 2 1/2", Gauze, Crankcase, Vent Filter
K & N UNIVERSAL, Black, flange id 1 3/8", length 2 1/2", Gauze, Crankcase, Vent Filter

RACE TECH SUPER SLICK OUTER BUSHING, Outer Bushing - SUPER SLICK FORK BUSHINGS, Triumph 97-01

• Revolutionary low-friction design ensures high-quality suspension performance
• Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available
• Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have PTFE on the inside of the bushing
• Sold in pairs

RACE TECH SUPER SLICK INNER BUSHING, Honda 83-15, Suzuki 90-09, Triumph 99-07, Yamaha 97-12

• Revolutionary low-friction design ensures high-quality suspension performance
• Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available
• Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have PTFE on the inside of the bushing
• Sold in pairs

RACE TECH SUPER SLICK OUTER BUSHING, Outer Bushing - SUPER SLICK FORK BUSHINGS, Honda 82-96, Husqvarna 1995, Kawasaki 81-12, KTM 03-14, Suzuki 81-11, Triumph 94-10, Yamaha 81-12

• Revolutionary low-friction design ensures high-quality suspension performance
• Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available
• Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have PTFE on the inside of the bushing
• Sold in pairs

SARGENT Fast Access Quick-Release Pins, Steel, Seat Part Or Accessory

• Quick-release ball detent pins end the hassle of seat or seat cowl mounting bolts
• Just press the pin spindle to release; no tools required
• Pins have snug-fitting stop washer allowing you to custom-fit the length of the pin to your bike's application
• Can be used on any motorcycle using 6mm (10mm head) bolts to secure the seat or seat cowl (do not use for stress-bearing applications)
• Cold-forged steel construction for strength
• Sold in pairs
• Made in the U.S.A.

SLIPSTREAMER Replacement Hardware Kit For S-08 Sport Shield

• Constructed of high-strength 3/16" acrylic
• Ball-socket mounts with four-point universal mounting
• Fits round headlights
• Height: 191/2" above headlight; width: 32"
• Fits both 7/8" and 1" handlebars
• Made in the U.S.A.

NOTE: See application chart on pages ???.

SLIPSTREAMER Replacement Hardware Kit, Universal

• These clear windshields offer both style and protection from the elements
• Constructed of 3/16" clear acrylic
• Top edge is scientifically designed to direct windblast above rider's head
• Anodized-aluminum mounting hardware will not rust
• Four-point mounting provides adjustments for shield height, position and angle
• Three sizes available; all fit 7/8" and 1" handlebars
• Made in the U.S.A.

SLIPSTREAMER Replacement Hardware Kit, Enterprise, Replacement w/ 7/8" Clamp, Honda 68-09, Kawasaki 73-09, Suzuki 72-11, Yamaha 71-11

• A full-size bolt-on fairing for excellent protection from the elements; even provides coverage below the headlight
• High-strength, 3/16" acrylic
• Four-point, fully adjustable mounting for versatility
• Anodized aluminum support rods; logo graphics
• Round or rectangular headlights
• Height: 21" above headlight; width: 33"
• Fits both 7/8" and 1" handlebars
• Made in the U.S.A.

NOTE: See application chart on pages ???.

SHINDY Shindy Acrylic Adhesive Sheet

• High-strength, double-sided adhesive sheet
• Great for mounting accessories and making general repairs
• Measures 80mm wide x 170mm long x 1.2mm thick

WARN Snatch Block, made in the usa, Replacement

• Snatch block doubles the pulling power of the winch (up to 7/32" cable) or aids in angled pulls

STOMPGRIP Clear Universal Stompgrip Traction Pad Strips, made in the usa, Rubber, Pair, Tank, Traction Kit

• Make gripping your ride incredibly easy for increased control with more contact between PWC and rider
• Provides more lower body grip and less upper body stress
• Ultra-clear proprietary elastomer material means paint and graphic remain visible through traction pads; also available in black
• Non-abrasive material; designed to wear down and be replaced like a tire
• Pre-molded with rounded edges that resist peeling
• Super-strong 3M peel-and-stick adhesive
• Made in the U.S.A.

STOMPGRIP Black Universal Stompgrip Frame Rails Traction Pad, made in the usa, Rubber, Tank, Traction Kit

• Make gripping your ride incredibly easy for increased control with more contact between PWC and rider
• Provides more lower body grip and less upper body stress
• Ultra-clear proprietary elastomer material means paint and graphic remain visible through traction pads; also available in black
• Non-abrasive material; designed to wear down and be replaced like a tire
• Pre-molded with rounded edges that resist peeling
• Super-strong 3M peel-and-stick adhesive
• Made in the U.S.A.

STOMPGRIP Black Universal Stompgrip Traction Pad, made in the usa, Rubber, size 7.5" x 14.5", Tank, Traction Kit

• Make gripping your ride incredibly easy for increased control with more contact between PWC and rider
• Provides more lower body grip and less upper body stress
• Ultra-clear proprietary elastomer material means paint and graphic remain visible through traction pads; also available in black
• Non-abrasive material; designed to wear down and be replaced like a tire
• Pre-molded with rounded edges that resist peeling
• Super-strong 3M peel-and-stick adhesive
• Made in the U.S.A.

STOMPGRIP Clear Universal Stompgrip Frame Rails Traction Pad, made in the usa, Rubber, Pair, Tank, Traction Kit

• Make gripping your ride incredibly easy for increased control with more contact between PWC and rider
• Provides more lower body grip and less upper body stress
• Ultra-clear proprietary elastomer material means paint and graphic remain visible through traction pads; also available in black
• Non-abrasive material; designed to wear down and be replaced like a tire
• Pre-molded with rounded edges that resist peeling
• Super-strong 3M peel-and-stick adhesive
• Made in the U.S.A.

STOMPGRIP Clear Universal Stompgrip Traction Pad, made in the usa, Rubber, size 7.5" x 14.5", Tank, Traction Kit

• Make gripping your ride incredibly easy for increased control with more contact between PWC and rider
• Provides more lower body grip and less upper body stress
• Ultra-clear proprietary elastomer material means paint and graphic remain visible through traction pads; also available in black
• Non-abrasive material; designed to wear down and be replaced like a tire
• Pre-molded with rounded edges that resist peeling
• Super-strong 3M peel-and-stick adhesive
• Made in the U.S.A.

VORTEX Bike Stand Conversion Adapters, Black, Steel, Adapter Kit

• Dual bearing wheels
• Thick, powder-coated tubing reduces flex
• Embossed logo plates
• Laser-cut spool lift plates
• Conversion adapters allow the rear stand to lift non-spooled bikes, have heavy-duty rubber ends to protect swing arms and the thick steel construction prevents flexing

WSM Needle And Seat For Mikuni, Brass

• Replaces OEM PART #VM28/163-1.5
• Fits all 30-40mm aluminum spigot mounts and 32-34mm zinc mounts

TECMATE Ducati Adapter For Ignitionmate, Ignitionmate Duo, Each, specific application, SAE Adapter, 12V

• SAE eyelet connectors now available in five-, 10- and 100-piece bulk packs
• For all TecMate chargers except the old-style Optimate Pro 4-S

TECMATE MV Agusta Adapter For Ignitionmate, Ignitionmate Duo, Each, specific application, SAE Adapter, 12V

• SAE eyelet connectors now available in five-, 10- and 100-piece bulk packs
• For all TecMate chargers except the old-style Optimate Pro 4-S

TECMATE CarbMate Extended M5 Threaded Adapter

• The extended vacuum adapter includes 11/2' of santoprene hose and is ideal for permanent mounting on sportbikes or any other vehicles where access to the carburetor or fuel-injection synchronizing ports requires removal of various side panels, air filters or the fuel tank
• The unique flexi-rigid adapter easily allows synchronization of machines with difficult-to-reach 5mm or 6mm carburetor or fuel-injection vacuum ports; simply bend the outer sheath to the appropriate angle/shape and then turn the inner tube to thread the brass fitting into the vacuum port
• Sold each

TECMATE CarbMate M6 Flexi-Rigid Threaded Adapter, M6 Flexi-Rigid Adapter

• The extended vacuum adapter includes 11/2' of santoprene hose and is ideal for permanent mounting on sportbikes or any other vehicles where access to the carburetor or fuel-injection synchronizing ports requires removal of various side panels, air filters or the fuel tank
• The unique flexi-rigid adapter easily allows synchronization of machines with difficult-to-reach 5mm or 6mm carburetor or fuel-injection vacuum ports; simply bend the outer sheath to the appropriate angle/shape and then turn the inner tube to thread the brass fitting into the vacuum port
• Sold each

TECMATE CarbMate M5 Flexi-Rigid Threaded Adapter, M5 Flexi-Rigid Adapter

• The extended vacuum adapter includes 11/2' of santoprene hose and is ideal for permanent mounting on sportbikes or any other vehicles where access to the carburetor or fuel-injection synchronizing ports requires removal of various side panels, air filters or the fuel tank
• The unique flexi-rigid adapter easily allows synchronization of machines with difficult-to-reach 5mm or 6mm carburetor or fuel-injection vacuum ports; simply bend the outer sheath to the appropriate angle/shape and then turn the inner tube to thread the brass fitting into the vacuum port
• Sold each