Drag Specialties

BARON Chrome Flame Master Cylinder Cover, made in the usa, Aluminum, Each, specific application

• Beautifully stylized covers really improve the look of the master cylinder
• Hand-polished, brightly chromed billet or gloss black covers available
• Smooth, V4 Art Deco and Flame styles also available
• Some models may require two covers
• Made in the U.S.A.

RAM MOUNT X-Grip With Forks Stem Mount, Black, made in the usa, Mounting Accessory

• High-strength composite and stainless steel construction and powder-coated marine-grade aluminum
• Include a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this, with a twist of the arm knob, allows you to move the X-Grip mount to optimum viewing position
• Spring-loaded holder expands and contracts for perfect fit of device
• Rubber-coated tips will hold device firm and stable
• The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts
• Kits include U-bolts that fit bars .5" to 1.25" in diameter
• Socket technology allows for multiple adjustment angles and articulation of device
• Include all necessary mounting hardware
• Compatible with devices (with or without case) that measure 1.875" minimum width, 3.25" maximum width and 0.875" depth
• Made in the U.S.A.

ODI Universal Handlebar Clamp Kit, made in the usa, Each, size of bar 7/8"

• Adapt 7/8" bar mounts to accept oversized 11/8" handlebars
• An economical alternative to replacing expensive top triple clamps
• PART #0603-0646 with two 35mm bolts required for use with Kawasaki models

ODI BOLT KIT HANDLEBAR KAW, made in the usa, Each, size of bar 7/8", specific application, Handlebar Clamp, Handlebar Clamp Kit

• Adapt 7/8" bar mounts to accept oversized 11/8" handlebars
• An economical alternative to replacing expensive top triple clamps
• PART #0603-0646 with two 35mm bolts required for use with Kawasaki models

RAM MOUNT Rectangle Ram Mount Motorcycle Brake/Clutch Reservoir Cover Base, Black, Powder-Coated, made in the usa, Aluminum, Universal, Mounting Accessory

• Fits cleanly over your existing reservoir cover with the 1" ball centered
• Made of die-cast aluminum with an over-molded rubber ball
• Easy installation
• Each kit includes black oxide SM420 screws (M4 x 20mm hex drive stainless steel machine screw), black oxide SM430 screws (M4 x 30mm hex drive stainless steel machine screw) and black oxide SM435 screws (M4 x 35mm hex stainless steel machine screw)
• Powder-coated marine-grade aluminum

RAM MOUNT RAM Mounting System Base With 9mm Hole, Black, Powder-Coated, made in the usa, Aluminum, Universal, Mounting Accessory

• Marine-grade aluminum with a black powder-coat finish, unless noted
• 1" rubber ball
• Mirror post base fits any open mirror mount hole on motorcycles with relocated mirrors
• Mounting hardware included

RAM MOUNT Ram Mount Motorcycle Fork Stem Base With 1" Ball, Black, made in the usa, Aluminum, Ball-Mount

• Cleanest way to mount small electronics on your motorcycle
• Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit
• Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from .5"-1.10"
• Powder-coated marine-grade aluminum

NOTE: Certain motorcycles require adding electrical tape to the area of the plug that has the largest diameter until it fits snugly in the stem.

RAM MOUNT RAM Mounting System Handlebar Clamp, Black, Powder-Coated, made in the usa, Aluminum, Universal, Mounting Accessory

• Marine-grade aluminum with a black powder-coat finish
• 1" rubber ball
• Mirror post base fits any open mirror mount hole on motorcycles with relocated mirrors
• Mounting hardware included

BARON Handlebar And Riser Adapter, made in the usa, Aluminum, size of bar 1/2"

• Converts your bike's riser spacing to 3.50" mounting points to allow Harley style handlebars, risers and drag bars to be installed
• Innovative and unique adapter mounts through the stock riser holes in the upper triple tree
• Artfully machined with facetted edges for a stylish look from T-6061 billet aluminum
• Hand polished and triple-plated for a beautiful chrome finish
• Designed to work with risers or drag bars with 1/2"-13 threads
• Easy to follow instructions and hardware included
• Triple tree shown not included
• Quick and easy to install
• Made in the U.S.A.

ROX SPEED FX 2" Black Anodized Pivoting Handlebar Riser, made in the usa, Aluminum, Pair, size of bar 1 1/4"

• 2" center-to-center rise with 11/8" stem
• Pivots backward/forward based on rider preference
• Accepts 11/8" handlebar
• Extended stem on the bottom portion of the riser makes for a great fit for the 14 and newer Yamaha Super Tenere and other bikes with angled handlebar clamps
• Features matte silver or anodized black finish

NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.

ROX SPEED FX 2" Clear Anodized Pivoting Handlebar Riser, made in the usa, Aluminum, Pair, size of bar 1 1/4", specific application

• 2" rise with 11/4" stem
• Accepts 11/4" handlebars
• Pivots forward or backward depending on rider preference
• Works with stock cables
• The risers come with low profile caps to replace the OEM bar clamp caps
• Features clear anodized finish
• Made in the U.S.A.

NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.

EMGO Aluminum Handlebar Riser Kit For 1 1/8" Handlebars, Black, Anodized, Pair

• Allows the rider to easily tune height of handlebars
• Can raise the height of the handlebar in 5mm increments with a maximum height increase of 25mm
• Available for 7/8" or 11/8" diameter handlebars
• Raw aluminum or black anodized finish

ROX SPEED FX 2" Matte Silver Pivoting Handlebar Riser, made in the usa, Aluminum, Pair, size of bar 1 1/4"

• 2" center-to-center rise with 11/8" stem
• Pivots backward/forward based on rider preference
• Accepts 11/8" handlebar
• Extended stem on the bottom portion of the riser makes for a great fit for the 14 and newer Yamaha Super Tenere and other bikes with angled handlebar clamps
• Features matte silver or anodized black finish

NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.

EMGO Aluminum Handlebar Riser Kit, Natural, Raw, Pair, size of bar 7/8"

• Allows the rider to easily tune height of handlebars
• Can raise the height of the handlebar in 5mm increments with a maximum height increase of 25mm
• Available for 7/8" or 11/8" diameter handlebars
• Raw aluminum or black anodized finish

EMGO Aluminum Handlebar Riser Kit For 7/8" Handlebars, Black, Anodized, Pair

• Allows the rider to easily tune height of handlebars
• Can raise the height of the handlebar in 5mm increments with a maximum height increase of 25mm
• Available for 7/8" or 11/8" diameter handlebars
• Raw aluminum or black anodized finish

BARON Black Handlebar Riser Extension, Powder-Coated, made in the usa, Aluminum, Each, specific application

• CNC machined from billet aluminum with a chrome or gloss black powdercoat finish
• As an extension of existing handlebars, moves bar up 1" towards or away from the rider
• As an adapter for bars with different riser spread from stock, pullback will vary depending on riser spread
• Come with handlebar mounting hardware that is hidden on installation for a clean look
• Made in the U.S.A.

NOTE: Not for OEM risers.

ROX SPEED FX 1 3/4" Black Pivoting Handlebar Risers, Anodized, made in the usa, Aluminum, Each, rise height 1.75", size of bar 1 1/8"

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

BARON Chrome Handlebar Riser Extension, made in the usa, Aluminum, Each, specific application

• CNC machined from billet aluminum with a chrome or gloss black powdercoat finish
• As an extension of existing handlebars, moves bar up 1" towards or away from the rider
• As an adapter for bars with different riser spread from stock, pullback will vary depending on riser spread
• Come with handlebar mounting hardware that is hidden on installation for a clean look
• Made in the U.S.A.

NOTE: Not for OEM risers.

ROX SPEED FX Black Pro-Offset Elite Block Risers, Anodized, made in the usa, Aluminum, Pair, rise height 1.25", size of bar 1 1/8", 7/8", Handlebar Riser

• Unique design allows for installation in either direction
• 1" offset means bar can be moved closer or further away, depending on rider preference
• Reducers lock into risers to ensure no slippage between components
• Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center-to-center distance with 8mm bolt threads
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

ROX SPEED FX 2" Deluxe Risers, Natural, Anodized, made in the usa, Aluminum, Each, size of bar 7/8", Handlebar Riser

• Fit most applications with 7/8" handlebars and a 7/8" bar clamp
• Sleek, stylish design
• Machined from billet 6061 T-6 aluminum
• Anodized clear finish
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

ROX SPEED FX 2" Gray Pivoting Handlebar Risers, Anodized, made in the usa, Aluminum, Pair, size of bar 1 1/8"

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

ROX SPEED FX 2" Clear Pivoting Handlebar Risers, Anodized, made in the usa, Aluminum, Each, size of bar 1 1/8"

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

ROX SPEED FX 2" Black Pivoting Handlebar Risers, Anodized, made in the usa, Aluminum, Pair, size of bar 1 1/8"

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

ROX SPEED FX 5" Rise Black Elite Pivoting Risers, Powder-Coated, made in the usa, Aluminum, Pair, size of bar 1 1/8", 7/8", Handlebar Riser

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

ROX SPEED FX 2" Rise Black Elite Pivoting Risers, Powder-Coated, made in the usa, Aluminum, Pair, size of bar 1 1/8", 7/8", Handlebar Riser

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

ROX SPEED FX 3 1/2" Rise Black Elite Pivoting Risers, Powder-Coated, made in the usa, Aluminum, Pair, rise height 3.5", size of bar 1 1/8", 7/8", Handlebar Riser

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

ROX SPEED FX 2" Natural Pivoting Handlebar Risers, Raw, made in the usa, Aluminum, Pair, size of bar 7/8"

• Patented design Pivoting Risers are incredibly universal, with a two-piece design that allows them to be clamped to almost any motorcycle with 7/8" handlebar clamps
• Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment
• 2" rise; for use with 7/8" diameter handlebar
• Out-board positioning also makes them incredibly durable
• Available in black or natural aluminum finish
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

ROX SPEED FX 1 3/4" Clear Anodized Pivoting Handlebar Risers, Silver, made in the usa, Aluminum, Pair, rise height 1.75", size of bar 1 1/8"

• Very popular addition for the BMW F800GS, KTM 690 Enduro and 990/1190 Adventure
• Also fits many other street, off-road, and dual sport models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

ROX SPEED FX 3 1/2" Rise Natural Elite Pivoting Risers, Raw, made in the usa, Aluminum, Pair, rise height 3.5", size of bar 1 1/8", 7/8", Handlebar Riser

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

ROX SPEED FX 2" Black Pivoting Handlebar Risers, Powder-Coated, made in the usa, Aluminum, Pair, size of bar 7/8"

• Patented design Pivoting Risers are incredibly universal, with a two-piece design that allows them to be clamped to almost any motorcycle with 7/8" handlebar clamps
• Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment
• 2" rise; for use with 7/8" diameter handlebar
• Out-board positioning also makes them incredibly durable
• Available in black or natural aluminum finish
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

BARON Riser Extensions, Raw, made in the usa, Aluminum, Pair, pullback sweep 1.5", specific application

• What every Venture rider wants and needs
• Pulls handlebar back 11/2" closer to the rider
• Relieves back, neck, shoulder and arm pain
• Improved grip point provides additional leverage
• Makes bike easier to control and steer
• Works with stock controls, lines and cables
• This accessory allows use of Baron Starbar handlebar on Venture models (sold separately)
• Raw finish
• Easy install with supplied instructions
• Made in the U.S.A.

NOTE: These extensions are not for use with Yamaha's accessory Chrome Dash Cover, or Yamaha's one-piece riser caps.

BARON Handlebar Riser Mounting Kit, made in the usa, Aluminum, specific application

• Allows most H-D-style risers with 1/2" x 13 threads to be converted to mount on Honda, Kawasaki, Suzuki and Yamaha cruisers
• All studs include one end that has 1/2"-13 x 3/4" to thread into the rider base
• The other end and the shoulder are machined to fit the triple trees of the different machines
• The kit includes two studs, two aircraft nuts, two washers, two jam nuts and installation instructions
• Easy to install

BARON Black Pullback Risers, made in the usa, Steel, Linerriser, Pair, pullback sweep 2.25", rise height 1", specific application, Handlebar Riser

• Pulls handlebars back 21/4" closer to the rider
• Direct replacement for stock risers - corrects stock bike s poor handlebar position
• Improves comfort and relaxes neck, shoulders, back, arms and wrists while riding
• Improves handling and reduces steering effort
• Designed to match and complement bike s original styling
• Beautifully sculpted and chromed billet aluminum
• No visible hardware for a super-clean look
• 21/4" pullback with only 1" of total rise
• Works with stock cables and lines
• Do-it-yourself instructions for a quick and easy installation are included
• Does not require special tools or skills
• Available in chrome or Yamaha Midnight Black
• Made in the U.S.A.

BARON Chrome Pullback Risers, made in the usa, Steel, Linerriser, Pair, pullback sweep 2.25", rise height 1", specific application, Handlebar Riser

• Pulls handlebars back 21/4" closer to the rider
• Direct replacement for stock risers - corrects stock bike s poor handlebar position
• Improves comfort and relaxes neck, shoulders, back, arms and wrists while riding
• Improves handling and reduces steering effort
• Designed to match and complement bike s original styling
• Beautifully sculpted and chromed billet aluminum
• No visible hardware for a super-clean look
• 21/4" pullback with only 1" of total rise
• Works with stock cables and lines
• Do-it-yourself instructions for a quick and easy installation are included
• Does not require special tools or skills
• Available in chrome or Yamaha Midnight Black
• Made in the U.S.A.