FL Brake Hoses and Lines

BURLY BRAND Black Vinyl Cable/Brake Line Kit, bar height 18", Single disc, Harley 00-06 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

BURLY BRAND Black Vinyl Cable/Brake Line Kit, bar height 16", Single disc, Harley 07-10 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

BURLY BRAND Black Vinyl Cable/Brake Line Kit, bar height 16", Single disc, Harley 00-06 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

BURLY BRAND Black Vinyl Cable/Brake Line Kit, bar height 16", Dual disc, Harley 08-13 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

BURLY BRAND Black Vinyl Cable/Brake Line Kit, bar height 14", Single disc, Harley 07-10 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

BURLY BRAND Black Vinyl Cable/Brake Line Kit, bar height 14", Single disc, Harley 00-06 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

BURLY BRAND Black Vinyl Cable/Brake Line Kit, bar height 13", Dual disc, Harley 08-13 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

BURLY BRAND Black Vinyl Cable/Brake Line Kit, abs, bar height 15", Dual disc, Harley 08-13 FL

• Complete installation kit for 12", 13", 14", 15", 16" and 18" Burly Ape hangers (shown on page ???)
• Softail, Dyna and XL kits include extended single-disc black braided steel brake line, extended clutch cable, extended throttle cables and all necessary wiring
• Kits for FLHT/FLHX/HD FL TRIKES include extended black dual-disc braided steel brake line (unless noted), extended clutch cable/clutch line and wiring for main harness, radio and CB
• Dresser kits reuse stock throttle-by-wire harness
• Made in the U.S.A.

MAGNUM Sterling Chromite II Designer Series Braided Non-ABS Front Brake Line Kit, banjo angle 35, clearcoated, Natural, length 25", 10mm, Harley 09-16 FL

• Brake kits utilize a superior two-piece design consisting of a direct fit lower assembly used in conjunction with alternative length upper lines
• All brazed manifold construction eliminates leaks, alignment problems, and unattractive threaded connections for a sleek appearance
• Choice of 35, 90 or 180 upper brake line banjo angles ensure a great fit
• -3AN connections for easy installations
• All fittings are highly polished and chrome or black chrome plated
• The Industrys highest quality braid in three color choices to compliment your bike: Sterling Chromite II, Black Pearl and Polished Stainless, the brightest stainless braid on the market
• Braid color and weave match on all Magnum control cables and brake lines
• Crystal clear outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor
• Inner PTFE tubing braided with Kevlar reinforcement provides the ultimate in high performance by greatly reducing line expansion
• Exceeds all DOT FMVSS-106 Specifications
• Made in the U.S.A.

MAGNUM Sterling Chromite II Designer Series Braided Non-ABS Front Brake Line Kit, banjo angle 35, clearcoated, Natural, length 23", 10mm, Harley 14-16 FL

• Brake kits utilize a superior two-piece design consisting of a direct fit lower assembly used in conjunction with alternative length upper lines
• All brazed manifold construction eliminates leaks, alignment problems, and unattractive threaded connections for a sleek appearance
• Choice of 35, 90 or 180 upper brake line banjo angles ensure a great fit
• -3AN connections for easy installations
• All fittings are highly polished and chrome or black chrome plated
• The Industrys highest quality braid in three color choices to compliment your bike: Sterling Chromite II, Black Pearl and Polished Stainless, the brightest stainless braid on the market
• Braid color and weave match on all Magnum control cables and brake lines
• Crystal clear outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor
• Inner PTFE tubing braided with Kevlar reinforcement provides the ultimate in high performance by greatly reducing line expansion
• Exceeds all DOT FMVSS-106 Specifications
• Made in the U.S.A.

MAGNUM Sterling Chromite II Designer Series Braided Non-ABS Front Brake Line Kit, banjo angle 35, clearcoated, Natural, length 19", 10mm, Harley 96-13 FL

• Brake kits utilize a superior two-piece design consisting of a direct fit lower assembly used in conjunction with alternative length upper lines
• All brazed manifold construction eliminates leaks, alignment problems, and unattractive threaded connections for a sleek appearance
• Choice of 35, 90 or 180 upper brake line banjo angles ensure a great fit
• -3AN connections for easy installations
• All fittings are highly polished and chrome or black chrome plated
• The Industrys highest quality braid in three color choices to compliment your bike: Sterling Chromite II, Black Pearl and Polished Stainless, the brightest stainless braid on the market
• Braid color and weave match on all Magnum control cables and brake lines
• Crystal clear outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor
• Inner PTFE tubing braided with Kevlar reinforcement provides the ultimate in high performance by greatly reducing line expansion
• Exceeds all DOT FMVSS-106 Specifications
• Made in the U.S.A.

Brake Hose Asy,Rr Clear Coat Flst Late 1987/1999 51-1/2" Lg Rpls Hd 40957-87B Hd9217-A
Upgrade your existing brake lines with these Clear Coat braided stainless steel brake lines. Unlike the OE rubber brake lines that expand under pressure and give you a spongy brake feel, these braided stainless steel covered brake lines retain flexibility while eliminating pressure expansion and providing a positive brake feel. To enhance their good looks and protect the braided portion of the brake line from rubbing against any other parts, a Clear Coat has been applied. This Clear Coat is UV resistant to help prevent yellowing or hardening from weather. All ends, junctions and brake tees are chrome plated for years of corrosion resistant good looks. All measurements are given in total length, end to end. To aid in brake line identification, the brake line ends and junctions are identified below.Goodridge
Softail Rear. LST Models Late 1987/1999. Ends & J. Junction Q. Includes two 10mm banjo bolts with washers. 51 1/2. (Imported)

Brake Hose Asy,Fr Clear Coat Flhr/I 1994/L* Fltr/I 1998/L* Rpls Hd 43350-94 Hd9242-A
Upgrade your existing brake lines with these Clear Coat braided stainless steel brake lines. Unlike the OE rubber brake lines that expand under pressure and give you a spongy brake feel, these braided stainless steel covered brake lines retain flexibility while eliminating pressure expansion and providing a positive brake feel. To enhance their good looks and protect the braided portion of the brake line from rubbing against any other parts, a Clear Coat has been applied. This Clear Coat is UV resistant to help prevent yellowing or hardening from weather. All ends, junctions and brake tees are chrome plated for years of corrosion resistant good looks. All measurements are given in total length, end to end. To aid in brake line identification, the brake line ends and junctions are identified below.LT ront. FLHR, FLTR dual disc 1994/Later. One upper line. Ends & G. Includes one 10mm banjo bolt with washers. 31 1/2. Two lower lines. Ends E & H. Includes two 10mm banjo bolt with washers and brake tee. 22 1/2. (Imported)

Clr Coat Ss Brk Hose Fr Tri- Piece Flt 84/08 Flhs 87/93 Rpls Hd 43349-848 M# R08731Ds
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
Stock length, Tri-Piece hose only
L ront Dual Disc fits FLT all models 1984/2008, FLHS all models 1987/1993
Replaces HD# 43349-84B

Clr Coat Ss Brk Hose Fr 42-1/4 Flstc 86/L*,Flstf 90/09,Flstn 93/99 Rpls 42303-96 R08745Ds
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
Softail ront Single Disc
Stock length, 42 ¹/₄ hose only fits LSTC 1986/Later
Replaces HD# 45305-86A
Stock length, 42 ¹/₂ hose only fits LST 1990/2009
Replaces HD# 42303-89A
Stock length, 42 ¹/₄ hose only fits LSTN 1993/1999
Replaces HD# 42303-96
DOT Approved

Rear Brake Hose,Clear Coat Bss All St 00/06,Includes Brk Tee Replaces Hd 45156-00 R08838Ds
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
Stock length, 20 ront hose & 19 ¹/₂ Rear hose
Softail Rear Disc fits all Softail models 2000/2006 - Master Cylinder to caliper - 3 pieces: master cylinder to brake tee hose, brake tee & brake tee to caliper hose
Replaces HD# 45156-00
DOT Approved

Clr Coat Ss Brk Hose Fr 43-3/4 Flsts Heritage 1997/2003 Replaces Hd 45091-97 R08757Ds
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
Stock length, 43 ³/₄ hose only
Softail ront Single Disc fits LSTS 1997/2003
Replaces HD# 45091-97
DOT Approved

Clr Coat Ss Brk Hose Fr Tri- Piece Flhr/I Fltr/I 94/07 For Tall Hb R08999S
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
6 O.S. Upper length, Tri-Piece hose only
L ront Dual Disc fits FLHR, FLHRI, FLTR, FLTRI 1994/2007
Replaces HD# 43350-96A
DOT Approved

Clr Coat Ss Brk Hose Fr Tri- Piece Flhr/I Fltr/I 94/07 For Tall Hb R08998S
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
4 O.S. Upper length, Tri-Piece hose only
L ront Dual Disc fits FLHR, FLHRI, FLTR, FLTRI 1994/2007
Replaces HD# 43350-96A
DOT Approved

Clr Coat Ss Brk Hose Fr Tri- Piece Flhr/I Fltr/I 94/07 For Tall Hb Mfg #R08997S
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
2 O.S. Upper length, Tri-Piece hose only
L ront Dual Disc fits FLHR, FLHRI, FLTR, FLTRI 1994/2007
Replaces HD#43350-96A
DOT Approved

Clr Coat Ss Brk Hose Fr Tri- Piece Flhr/I Fltr/I 94/07 Rpls Hd43350-96A Mfg#R08756Ds
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
Stock length, Tri-Piece hose only
L ront Dual Disc fits FLHR, FLHRI, FLTR, FLTRI 1994/2007
Replaces HD# 43350-96A
DOT Approved

Clr Coat Ss Brk Hose Rr 48" Lg Flst Models Late 1987/1999 Rpls 40957-87B ...... R08839Ds
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
Stock length, 48 hose only
Softail Rear Disc fits LST models - Master Cylinder to caliper - 1 piece with integrated brake tee and wire harness adapter Late 1987/1999
Replaces HD# 40957-87B
DOT Approved

V-Twin Manufacturing SS Russell Front Brake Line, +6" 97-03 FLHR-FLHRI - Kit

33-1/4" Russell braided stainless steel front brake hose. This is a 3 piece upper hose set and is 6" over stock length .

OEM: 40971-00

FLHR 1997-UP
FLHRI 1997-UP

V-Twin Manufacturing SS Russell Dual Disc Upper Brake Line 84-02 FLT-FLH - Sold Each

29" Russell braided stainless steel upper brake hose connects from the master cylinder to the brake junction.
For use with dual disc calipers.

FLT 1984-1996
FLHT 1984-1996

V-Twin Manufacturing Russell Rear Brake Line 87-99 FLST-FLSTC - Sold Each

49-9/16" Russell braided stainless steel rear brake hose.
*D.O.T. Approved

FLST 1987-1999
FLSTC 1987-1999
FLSTF 1990-1999
FLSTN 1990-1999
FLSTS 1997-1999

V-Twin Manufacturing SS Russell Front Brake Line, 3 Piece, 1984-2003, FLT-FLHT - Kit

Russell braided stainless steel brake hoses include two 22-5/8" hoses and one 19-1/2" hose.
*D.O.T. Approved
OEM: 43349-84A

FLT 1984-1998
FLHT 1984-2003