FX and XL Handlebar Extension Harnesses

NAMZ Ready-To-Install Handlebar Extension Harness, length +4", Harley 11-16 FX 11-16 FL 14 - 16 XL

• All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches
• Harnesses include both male and female Molex terminals crimped on each end
• Kits for all except FLHT and FLT models include wire heat shrink, a length of 3/8" heat shrink and color-matching wire
• Kits for FLHT and FLT models include wire heat shrink, a length of 1/2" heat shrink and color-matching wire
• Made in the U.S.A.

V-Twin Manufacturing Handlebar Wiring Harness 8" Extension Kit, 2007-Up - Kit
Handlebar wiring harness extension kit has an 8" extension and includes 6 right and 8 left OEM color matching wires. Fits: FXST 2007-UP FLST 2007-UP FXD 2007-UP XL 2007-UP UOM: 1 - KIT Country of Origin: Impo

NAMZ Universal Handlebar Switch Wire Extensions, Harley 07-11 FX 07-10 FL 07 - 13 XL

• Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars
• Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be re-installed into the factory connector
• All kits come 100% complete with OEM color matching wire and all of the heat-shrink tubing needed to do the job right
• 24" universal handlebar switch wire extensions; fits up to 20" Apes
• Made in the U.S.A.

LA CHOPPERS Handlebar Extension Wiring Kit, Harley 11-16 FX 11-16 FL 14 - 16 XL

• Saves time by streamlining handlebar wiring jobs
• Kits include all the materials necessary to extend the wires for hand controls (do not include extensions for Throttle By Wire controls if applicable)
• Terminals crimped on one end
• Cut-to-length design will accommodate up to 20" Ape Hanger handlebars
• Includes OEM color matching wires and heat shrink
• Made in the U.S.A.

LA CHOPPERS Handlebar Extension Wiring Kit, Black, Harley 96-06 FX 96-06 FL 96 - 06 XL

• Saves time by streamlining handlebar wiring jobs
• Kits include all the materials necessary to extend the wires for hand controls (do not include extensions for Throttle By Wire controls if applicable)
• Terminals crimped on one end
• Cut-to-length design will accommodate up to 20" Ape Hanger handlebars
• Includes OEM color matching wires and heat shrink
• Made in the U.S.A.

LA CHOPPERS Handlebar Extension Wiring Kit, Black, Harley 07-11 FX 07-10 FL 07 - 13 XL

• Saves time by streamlining handlebar wiring jobs
• Kits include all the materials necessary to extend the wires for hand controls (do not include extensions for Throttle By Wire controls if applicable)
• Terminals crimped on one end
• Cut-to-length design will accommodate up to 20" Ape Hanger handlebars
• Includes OEM color matching wires and heat shrink
• Made in the U.S.A.

ALLOY ART Extended Handlebar Wiring Harness, length 36", made in the usa, Each, specific application, Harley 96-06 FX 96-06 FL 96 - 06 XL

• Extended harness simplifies handlebar swaps that require longer wiring
• Color coded to match OEM wiring; measures 36" in length
• Made in the U.S.A.

Wire,Handlebar Kit Extended Bt Spt 1996-2006, 48" Long W/Connectors,Color Coded Wires

• These harness kits can be used to replace OE color coded handlebar harness and are 12 inches longer than OE
• Also can be used to extend original wiring harnesses to accommodate higher risers and handlebars
• Kit includes color coded wires, flexible black vinyl housing and crimp connectors

V-FACTOR
Fits Big Twin & Sportster 1996/Later (48 total length)
(Imported)

Wire Harness,Handlebar Lh W/Sw Bt 72/81 Fx Spt 73/81 W/Sw/Hdw 48"Long For High Handlebars
Complete handlebar wiring harness with color coded wires and switches already attached. All installation accessories and hardware are included in this kit, which makes it the only practical and time saving kit to use. 48 in length to use with custom handlebars or you can cut to length.V-FACTOR
Left Side Kit
Fits L & Big Twin 1972/1981, X & Sportster 1973/1981
(Imported)

Wire Harness,Handlebar Rh W/Sw Bt 72/81 Fx Spt 73/81 W/Sw/Hdw 48"Long For High Handlebars
Complete handlebar wiring harness with color coded wires and switches already attached. All installation accessories and hardware are included in this kit, which makes it the only practical and time saving kit to use. 48 in length to use with custom handlebars or you can cut to length.V-FACTOR
Right Side Kit
Fits L & Big Twin 1972/1981, X & Sportster 1973/1981
(Imported)

V-Twin Manufacturing Handlebar Wiring Harness 4" Extension Kit, 1996-2006, FXD - Kit
Handlebar wiring harness extension kit has a 4" extension and includes 6 right and 6 left OEM color matching wires. Fits: FXST 1996-2006 FLST 1996-2006 FXD 1996-2006 XL 1996-2006 UOM: 1 - KIT Country of Origi

V-Twin Manufacturing Ignition Switch Harness, 1989-95 FXST-FLST-FXR - Sold Each

Ignition switch wiring harness features plastic wire in original factory color codes, with all terminals applied, in vinyl loom.

FXST 1989-1995
FLST 1989-1995