Name: Engine Bushing,Rebuild Kit Cvr /Gear Case Sportster 1957/1976 Kit For Case & Cvr.Mfg 15-0145
Brand: Mid-USA
SKU: MID-64606
Price: 180.69 USD
Availability: InStock

Mid-USA

Engine Bushing,Rebuild Kit Cvr /Gear Case Sportster 1957/1976 Kit For Case & Cvr.Mfg 15-0145

MID-64606

$180.69

In Stock

Shipping calculated at checkout.

Engine Bushing,Rebuild Kit Cvr /Gear Case Sportster 1957/1976 Kit For Case & Cvr.Mfg 15-0145
Complete cam/gear cover and case bearing/bushing rebuild kits for all Sportster models.HARDWARE
Fits Sportster 1957/1976
Contains the following:
5 Bushing Pins (Replaces HD# 275), 6 Cam Shims (Replaces HD# 6769), 4 Needle Bearings (Replaces HD# 9057), 3 Cam Bushings (Replaces HD# 25586-37), 2 Idler Gear Bushings (Replaces HD# 25597-57), 2 Cam Gear Plates (Replaces HD# 25551-58), 1 Pinion Bushing (Replaces HD# 25593-57), 1 Rear Cam Bushing (Replaces HD# 25588-57)

Mid-USA

Engine Bushing,Rebuild Kit Cam /Gear Case Big Twin L1973/1992 Replaces Hd 25577-73...15-0131

MID-64605

$72.63

In Stock

Shipping calculated at checkout.

Engine Bushing,Rebuild Kit Cam /Gear Case Big Twin L1973/1992 Replaces Hd 25577-73...15-0131
Save time, money and effort when you need to replace all the normal wear components in your cam/gear cover (nose cone) with this complete Rebuild Kit. Fits Big Twin Late 1973/1992.

Mid-USA

Rocker Arm Gasket,Cover Set Spt 91/03 Molded Rubber Rocker Gskt Rpls Hd 17036-91 C9066

MID-64419

$45.60

In Stock

Shipping calculated at checkout.

Rocker Arm Gasket,Cover Set Spt 91/03 Molded Rubber Rocker Gskt Rpls Hd 17036-91 C9066
The finest quality gasket set available from a premium gasket manufacturer in the USA. Contains molded cover gaskets.Use with purshrod seal kit 64803 if needed. 1991/later.

Mid-USA

Piston Rings,Hastings +.010"Os Kn Ph Sh Big Bore 3-5/8"Std W/Moly Top Ring 2M-5722-01

MID-63901

$47.15

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.010"Os Kn Ph Sh Big Bore 3-5/8"Std W/Moly Top Ring 2M-5722-01
Hastings ring sets to fit S & S, Rev Tech, MID-USA and many other 3 5/8 Big Bore pistons. Each set has a 5/64 thick moly top compression ring, 5/64 thick 2nd ring and 3/16 thick bottom ring. Sold in a set for one piston. Fits Knucklehead, Panhead and Shovelhead engines All Years.Piston ring set. +.010 OS.

Mid-USA

Piston Rings,Hastings Std Bore Kn Ph Sh Big Bore 3-5/8"Std W/Moly Top Ring 2M-5722-Std

MID-63900

$47.15

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings Std Bore Kn Ph Sh Big Bore 3-5/8"Std W/Moly Top Ring 2M-5722-Std
Hastings ring sets to fit S & S, Rev Tech, MID-USA and many other 3 5/8 Big Bore pistons. Each set has a 5/64 thick moly top compression ring, 5/64 thick 2nd ring and 3/16 thick bottom ring. Sold in a set for one piston. Fits Knucklehead, Panhead and Shovelhead engines All Years.Piston ring set. Standard.

Mid-USA

Hastings Piston Rings +.040"Os Spt 1200,Sh L83/84,Evo 3-1/2" Bore Type "G"

MID-63611

$98.05

In Stock

Shipping calculated at checkout.

Hastings Piston Rings +.040"Os Spt 1200,Sh L83/84,Evo 3-1/2" Bore Type "G"

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.010"Os Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"G" Rp 21922-73 2M 6164-01

MID-63608

$98.05

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.010"Os Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"G" Rp 21922-73 2M 6164-01

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.005"Os Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"G" Rp 21921-83 2M-6164005

MID-63607

$98.05

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.005"Os Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"G" Rp 21921-83 2M-6164005

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings Std Bore Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"G" Rp 21920-83 2M-6164Std

MID-63606

$98.05

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings Std Bore Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"G" Rp 21920-83 2M-6164Std

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.030"Os Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"F" Rpls 21924-83 6164-03

MID-63604

$76.50

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.030"Os Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"F" Rpls 21924-83 6164-03

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.020"Os Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"F" Rpls 21923-83 6164-02

MID-63603

$76.50

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.020"Os Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"F" Rpls 21923-83 6164-02

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.010"Os Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"F" Rpls 21922-83 6164-01

MID-63602

$74.20

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.010"Os Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"F" Rpls 21922-83 6164-01

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.005"Os Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"F" Rpls 21921-83 6164-005

MID-63601

$76.50

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.005"Os Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"F" Rpls 21921-83 6164-005

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings Std Bore Spt 1200 Sh L83/L BT Evo 3-1/2 Bore"F" Rpls 21920-83 6164-Std

MID-63600

$76.50

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings Std Bore Spt 1200 Sh L83/L Bt Evo 3-1/2 Bore"F" Rpls 21920-83 6164-Std

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.010"Os Spt 1000Cc "A" 3-3/16"Std Bore Rpl Hd22357-72A Mfg 2M-7003-01

MID-63515

$110.10

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.010"Os Spt 1000Cc "A" 3-3/16"Std Bore Rpl Hd22357-72A Mfg 2M-7003-01

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.030"Os Spt 1000Cc "A" 3-3/16"Std Bore Rpl Hd22359-72A Mfg 2M-7003-03

MID-63510

$110.10

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.030"Os Spt 1000Cc "A" 3-3/16"Std Bore Rpl Hd22359-72A Mfg 2M-7003-03

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings Std Bore Spt 1000Cc "A" 3-3/16"Std Bore Rpl 22355-72A Mfg 2M-7003-Std

MID-63508

$110.10

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings Std Bore Spt 1000Cc "A" 3-3/16"Std Bore Rpl 22355-72A Mfg 2M-7003-Std

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.050"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22361-73 Mfg 7003-05

MID-63505

$90.55

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.050"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22361-73 Mfg 7003-05

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.030"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22359-72A Mfg 7003-03

MID-63503

$91.10

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.030"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22359-72A Mfg 7003-03

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.020"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22358-72A Mfg 7003-02

MID-63502

$90.55

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.020"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22358-72A Mfg 7003-02

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.010"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22357-72A Mfg 7003-01

MID-63501

$90.55

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.010"Os Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22357-72A Mfg 7003-01

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings Std Bore Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22355-72A Mfg 7003-Std

MID-63500

$90.55

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings Std Bore Spt 1000Cc "D" 3-3/16"Std Bore Rpls Hd22355-72A Mfg 7003-Std

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.020"Os BT 1340Cc "A" 3.498"Std Bore Rpl Hd22336-78B Mfg 2M-6127-02

MID-63206

$101.75

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.020"Os Bt 1340Cc "A" 3.498"Std Bore Rpl Hd22336-78B Mfg 2M-6127-02

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separator ring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons (except as noted below)

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.030"Os BT 1340Cc "D" 3.498"Std Bore Rpls Hd22337-78B Mfg 6127-03

MID-63203

$75.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.030"Os Bt 1340Cc "D" 3.498"Std Bore Rpls Hd22337-78B Mfg 6127-03

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.020"Os BT 1340Cc "D" 3.498"Std Bore Rpls Hd22336-78B Mfg 6127-02

MID-63202

$75.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.020"Os Bt 1340Cc "D" 3.498"Std Bore Rpls Hd22336-78B Mfg 6127-02

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.060"Os BT 1200Cc,Std Bore 1340Cc "D" Rpls Hd22334-78B Mfg 6127-Std

MID-63200

$75.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.060"Os Bt 1200Cc,Std Bore 1340Cc "D" Rpls Hd22334-78B Mfg 6127-Std

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separatorring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.070"Os BT 1200Cc,+.010"Os 1340Cc "A" Rpl Hd22335-78B Mfg 2M-6127-01

MID-63115

$101.75

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.070"Os Bt 1200Cc,+.010"Os 1340Cc "A" Rpl Hd22335-78B Mfg 2M-6127-01

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separator ring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons (except as noted below)

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.040"Os BT 1200Cc "A" 3.4375"Std Bore Rpl Hd22330-55B Mfg 2M-6482-04

MID-63112

$98.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.040"Os Bt 1200Cc "A" 3.4375"Std Bore Rpl Hd22330-55B Mfg 2M-6482-04

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separator ring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons (except as noted below)

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.030"Os BT 1200Cc "A" 3.4375"Std Bore Rpl Hd22329-55B Mfg 2M-6482-03

MID-63111

$98.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.030"Os Bt 1200Cc "A" 3.4375"Std Bore Rpl Hd22329-55B Mfg 2M-6482-03

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separator ring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons (except as noted below)

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.020"Os BT 1200Cc "A" 3.4375"Std Bore Rpl Hd22328-55B Mfg 2M-6482-02

MID-63110

$98.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.020"Os Bt 1200Cc "A" 3.4375"Std Bore Rpl Hd22328-55B Mfg 2M-6482-02

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separator ring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons (except as noted below)

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings +.010"Os BT 1200Cc "A" 3.4375"Std Bore Rpl Hd22327-55B Mfg 2M-6482-01

MID-63109

$98.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings +.010"Os Bt 1200Cc "A" 3.4375"Std Bore Rpl Hd22327-55B Mfg 2M-6482-01

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separator ring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons (except as noted below)

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Mid-USA

Piston Rings,Hastings Std Bore BT 1200Cc "A" 3.4375"Std Bore Rpl 22352-55B Mfg 2M-6482-Std

MID-63108

$98.65

In Stock

Shipping calculated at checkout.

Piston Rings,Hastings Std Bore Bt 1200Cc "A" 3.4375"Std Bore Rpl 22352-55B Mfg 2M-6482-Std

Hastings has been producing top quality rings since 1923 for major manufacturers including Harley-Davidson^®
Ring sets are available with your choice of moly top rings or cast top rings
The moly type top ring features a moly coating on the ring face that helps reduce friction while extending the working lifespan of the ring. Longer break-in time is required for this type of ring and it is best suited for cylinders with a fresh bore
The cast type top ring requires less break-in time and is best suited for cylinders that have been freshly deglazed
All middle rings are the cast type with a reverse torsional style and a taper face for excellent compression retention while providing additional oil control
The 3 piece lex-Vent^® bottom rings feature lightweight chrome plated rails with separator ring that provides exact cylinder wall tension and oil control
Hastings is a QS-9000 certified company that provides the utmost in quality control with product that can be traced all the way back to the foundry where the raw metal was produced to the finished part
Includes installation instructions
Sold in sets for 2 pistons (except as noted below)

Ring Type & Width
Ring Type	Moly Top Ring	Cast Top Ring	Cast Middle Ring	Chrome Bottom Ring
A	1/16	---	1/16	3/16
D	---	1/16	1/16	3/16
E	1.5mm	---	1.5mm	1.75mm
	---	1/16	1/16	5/32
G	1/16	---	1/16	5/32
H	1.5mm	---	1.5mm	3mm
I	1.5mm	---	1.5mm	2.5mm

Brand

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Join the K and G Cycles family of friends