Mid-USA

Axle Spacer,Cut To Length Cus App 6"Lgx1-1/8"Odx 3/4"Id Uw/3/4" O.D. Axle,Rust Free Ss

• Designed for custom applications that require longer than stock external wheel hub/axle spacers
• Available for ³/₄ O.D. axle or 1 O.D. axle
• Made from rust free stainless steel with a super smooth machine finish that is suitable for polishing

V-FACTOR
Machine Finish ³/₄ I.D. Spacer, 6 length, 1 ¹/₈ O.D.
(Imported)

Sealed Wheel Bearing, 25Mm Fits All 25Mm Application Single Row Bearing, Hd9276
Single Row (Sealed) Wheel Bearing with 25mm I.D.
Replaces HD# 9276

Axle Nut,Washer & Cotter Pin Bt Spt 89/L* Uw Rr Axle 5/8-18 Thd & Cotter Pin Hole C-31-42
or use on rear axle that is drilled for a cotter in. ⁵/₈-16 thread.Gardner-Westcott
Chrome Plated Kit
Fits Big Twin & Sportster 1989/Later
Replaces HD# 7987, 5756 & 510

Highest quality American made OE style steel hub spacers are precision machined to the correct length to properly position spoke or cast wheels as listed. All spacers fit the OE ³/₄ O.D. axle and have the OEM 1 ¹/₈ O.D. for proper seal fit. Spacers are finished in chrome or cadmium plating for corrosion resistance and extended seal life. To control wheel end play, see the wheel section for hub center spacers. Due to the numerous models and years, if in doubt simply order the part by length.

Chrome Plated 1.340 long Non-Stepped Axle Spacer

Fits left on FLSTC, FXSTS, FXSTC, FXSTSB, 1997/1999 front

Replaces HD# 43683-97
Mfg. PN 7334C

Rear Axle Fxd Models 1991/2005 Rpls. Hd#41114-90

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

V-FACTOR
Chrome Plated Axle only
Fits Dyna models 1991/2005
Replaces HD# 41114-90
(Imported)

Front Axle W/Spacers & Nut Cp Fits Dyna Narrow Glide 04/05 Oe Style For 1" Bearings

• OE style steel front axles are a direct replacement
• Available as a complete kit with chrome spacer(s), washers and axle nut or just the axle by Fitself
• See the wheel section for axle spacers and axle nut & washer
V-FACTOR
Chrome Plated Axle Kit
Includes spacer(s), nut & washers
Fits XD 2004/2005
(Imported)

Axle,Rear W/Chrome Head Bt 5 Speed Chain & Belt 1980/L Replaces Hd 41110-79A

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

V-FACTOR
Chrome Plated Axle only
Fits FXR 1982/1994, FLT, FLHT & FLHR 1980/1999 - will fit 2000/Later (except FLT 2002/Later) models if using OEM spacers, Softail all models 1986/1999 - will fit 2000/Later (except FLT 2002/Later) models if using OEM spacers, Softail 2000/2006
Replaces HD# 41110-79A
(Imported)

Wheel, Billet Hub 60 Spoke All 79/99 Rear 16 X 3.00 Chrome, Billet Hub

• Drop center steel rims
• Chrome spokes
• Custom billet aluminum hubs are Show Chrome plated
• Includes bearings and seals
• * When replacing models equipped with 19 wheels with these 21 wheels, you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you much purchase custom shallow back brake calipers

V-FACTOR
Billet Hub with 60 Spokes
Rear, Dual 7/16 - 3/8 Flange
Tapered 3/4 Bearing
16 x 3.5 Size
Fits all models 1979/1999

Wheel, 40 Spoke 21 X 2.15 Fxst/Fxdwg 84/99 Sd 5/16 Holes Chrome

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hubs
• Includes bearings and seals

V-FACTOR
OE Hub with 40 Spokes
Front Single ⁵/₁₆ lange
Tapered ³/₄ Bearing
21 x 2.15 Size
Fits FXST & FXDWG 1984/1999
(Imported)

Brake Hose Asy,Clear Coat Chrome #3 Hose W/Female Ends Use W/Fittings 23"Long R58072S
Russell Cycleflex Universal series incorporates the beauty of quality show chrome with the convenience of fitting and choice backed by the reliability of factory assembly. Cycleflex hose reduces brake line expansion, minimizing brake fade. These universal series hoses are DOT approved. Use our wide selection of #3 adapter fittings and hose lengths to allow precise fitment to your motorcycle if you are replacing stock factory hose or working on a custom brake system. All adapter fittings are chrome plated except brake light switch banjo bolt 45503. Additional brake line fittings are located in the control section.Russell
Clear Coated #3 Braided Stainless Steel 23 Brake Hose with Chrome Ends

Brake Hose Asy,Rr Clear Coat Dyna Models 1991/1999 Rpls Hd 40956-90 Hd9219-A
Upgrade your existing brake lines with these Clear Coat braided stainless steel brake lines. Unlike the OE rubber brake lines that expand under pressure and give you a spongy brake feel, these braided stainless steel covered brake lines retain flexibility while eliminating pressure expansion and providing a positive brake feel. To enhance their good looks and protect the braided portion of the brake line from rubbing against any other parts, a Clear Coat has been applied. This Clear Coat is UV resistant to help prevent yellowing or hardening from weather. All ends, junctions and brake tees are chrome plated for years of corrosion resistant good looks. All measurements are given in total length, end to end. To aid in brake line identification, the brake line ends and junctions are identified below.Goodridge
Dyna Rear. Dyna models 1991/Later. Ends & K. Junction O. Includes two 10mm banjo bolts with washers. 20. (Imported)

Brake Hose,#3 Braided 4'Roll Use W/Goodridge Reusable Brake Fittings & All Brake Fluids
Goodridge cut to length #3 braided stainless steel brake/hydraulic clutch hose is designed to outperform the OE style rubber hose by not expanding under pressure. It will give you a more positive feel at the lever while providing a greater degree of safety. or improved fluid transfer, the smooth bore inner liner is made of P.T..E. (the same slick material used on frying pans) and is compatible with any type of brake fluid. All parts in this system are reusable, easy to assemble and chrome plated unless indicated otherwise. All reusable ends include a brass ferrule. Use tool 40200 to simplify installation of the brass ferrule.Goodridge
Non-Coated Braided Stainless Steel Hose
4 oot Roll, (Imported)

Brake Hose,#3 Braided 25'Roll Use W/Goodridge Reusable Brake Fittings & All Brake Fluids
Goodridge cut to length #3 braided stainless steel brake/hydraulic clutch hose is designed to outperform the OE style rubber hose by not expanding under pressure. It will give you a more positive feel at the lever while providing a greater degree of safety. or improved fluid transfer, the smooth bore inner liner is made of P.T..E. (the same slick material used on frying pans) and is compatible with any type of brake fluid. All parts in this system are reusable, easy to assemble and chrome plated unless indicated otherwise. All reusable ends include a brass ferrule. Use tool 40200 to simplify installation of the brass ferrule.Goodridge
Non-Coated Braided Stainless Steel #3 Hose
25 oot Roll, (Imported)

Clr Coat Ss Brk Hose Rr 24-25" Fl 63/72 Fx 71/72 Frm/Brk Drum Rpls Hd 42300-63 M#08914S
Tough and flexible, the Russell Powerflex^™ Stainless Hose, which is featured in Russell Cycleflex Brake Hoses, is number one for brake hoses or maximum pressure applications. Low friction properties of Teflon^® and high burst strength of stainless steel overbraiding supply maximum performance under severe braking conditions. Powerflex^™ Hose absorbs no moisture which can be dangerous to brake systems. Stainless overbraiding will not corrode or discolor in bad weather. Russell Powerflex^™ Stainless Wire Braid Hose features the Teflon^® liner that resists corrosion from the most exotic brake fluids and does not expand under severe braking conditions. Maximum pressure 15,000 PSI. Russell
Stock length, 24 ¹/₄ hose only
L Rear fits L, FLH rame Joint to Drum only 1963/1972
Replaces HD# 42300-63
X Rear Disc fits X rame Joint to Drum only 1971/1972
Replaces HD# 42300-63

Sprocket Tooth Pick-Up Sensor Uw #48062 Or #48063 Only Reads Rear Sprocket Tooth #Sen-1019

• Odyssey Series II, 2 ¹/₁₆ O.D.
• Designed with the chopper in mind, these gauges do not require any hard to hide external module
• Gauges are sold separately and will require the appropriate housing cover and mounting bracket as needed
• Speedometers will also require the appropriate sensor, adapter or sending unit as listed
• The gauges feature high visibility digital numerals that are easy to read in full sunlight and include a non-glare high contrast lens
• All calibration is done with the function button
• The tachometer features an adjustable warning point to flash the gauge readout and includes a high RPM readout

Dakota Digital
Required Sprocket Tooth (Universal) Sensor
Designed to pick up off the teeth of a steel sprocket or a steel transmission pulley
Requires a fabricated mounting bracket with a ¹/₂ hole for the sensor
40 lead wire

Speedometer,Rear Whl Sensor Use W/2000 Series Spdo,Sensor Mt On Rr Axle Spacer, Rig/St

• 2000 Series
• Can be used with carbureted or fuel injected models
• Includes mounting hardware for use with stamped steel type dash 1947/1967 or die cast type dash 1968/Later
• Push-button speedometer calibration for when final drive ratio or tire diameter has been altered
• Works with electronic or 12 volt point type ignition systems with single or dual fire coil
• Built-in speed output signal for models equipped with an automatic turn signal cancel module or cruise control
• Display intensity can be reduced for night time use if a remote switch is installed
• Maximum speed readout is 255 MPH
• Maximum odometer readout is 99,999.9 and the maximum tripometer readout is 999.9
• Super bright fluorescent teal green displays are easy to see in direct sunlight
• Includes 18 speed adapter 48618 for use with 1996/Later models equipped with electronic speed sensor
• Includes non-glare scratch resistant lens with chrome trim ring
• 2 year warranty against manufacturer defects
• Includes instructions

Note: Speedometers for 1995/Later models can be used with the OE transmission sensor when used with the included adapter. All other applications require a specialized sensor listed below.

Display Features:

• Quick response bar graph type tachometer with adjustable shift point indicator (can be used on engines with 1 to 15 cylinders)
• The tachometer functions between 350 & 8,000 RPMs
• Resetable countdown service meter (with warning)
• Hour meter
• Includes a feature to recall your high speed and RPM
• unctions include 0-60 MPH timer, ¹/₄ mile timer and ¹/₄ mile speed
• Integrated Voltmeter (with low voltage warning)
• Includes following indicators: turn signal, high beam, neutral, security warning, gear position indicator (compatible with 3/6 speed transmissions), adjustable RPM warning indicator with an output for an external shift light, low oil pressure, wait to start (for fuel injected models) and check engine (for fuel injected models)
Dakota Digital
Polished Aluminum Rear Axle Spacer Mounted Sensor
Clamps to the 1 ¹/₈ O.D. spacer and reads off of the sprocket/pulley bolts

Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89
V-FACTOR
Rubber Damper
Fits 1968/1995 with cast dash
Replaces HD# 67190-89
(Imported)

Rubber Dash & Oil Tank Mount Fxs Fxef Fxb 77/84,5/16"-18 Stud W/5/16-18 Female,50235-63

• Designed to help isolate the vibration that is transmitted to the oil tank
• Also used for battery carrier trays, instrument dash panels and custom oil tanks
• All mounts are made with an exclusive rubber compound and feature heat-treated steel studs that exceed OEM specifications
• Heavy-duty mounts are absolutely the strongest available with their superior tensile strength, shear resistance and anti-sag qualities
• Mount bodies are 1 long x 1 O.D.
• Manufacturer's 2 year warranty
• Sold Each

D&S Performance
Standard Duty, Thread Size & Length: 5/16-18 x 1/4 emale & 5/16-18 x 1/2 Male
Replaces HD# 50235-63

Instrument Panel Trim Rubbers Late Die Cast Dash Fl Style Replaces Hd 71295-68

• Solid die cast replicas with finishes as listed below
• Includes decal, trim rubbers, lenses and dividers used between the bulbs
• Fits at Bob tanks with late style dash base as listed

V-FACTOR
Replacement Trim Rubbers Pair for 48114, 48115 & 48129
Replaces HD# 71295-68