Name: Oil Filter Paper Element Cp BT 4 Spd L82/86(Ex St)Spt 1980 /Early 84 Rpls Hd 63782-80T
Brand: Mid-USA
SKU: MID-87103
Price: 13.29 USD
Availability: InStock

Mid-USA

Oil Filter Paper Element Cp BT 4 Spd L82/86(Ex St)Spt 1980 /Early 84 Rpls Hd 63782-80T

MID-87103

$13.29

In Stock

Shipping calculated at checkout.

Oil Filter Paper Element Cp Bt 4 Spd L82/86(Ex St)Spt 1980 /Early 84 Rpls Hd 63782-80T

See below for availability of element type
Check dimensions before ordering

Emgo
Chrome Plated oil filter with OE paper element
2 1/2 long, 5/8-18 thread (16mm X 1.5mm)
Fits Big Twin 4 speed Late 1982/1986 (except Softail), Sportster 1980/Early 1984
Replacement filter for Early style 87001
Replaces HD# 63782-80T

Mid-USA

Oil Filter Kit,Conversion Sportster 1957/1981(Ex 1979) With Hardware

MID-87001

$52.00

In Stock

Shipping calculated at checkout.

Oil Filter Kit,Conversion Sportster 1957/1981(Ex 1979) With Hardware
Oil filtering system is complete with mounting plate, filter, hoses, clamps and hardware. Uses late model spin on filters.V-FACTOR
Chrome Plated Kit
Fits Sportster models 1957/1981 (except 1979 with OE style crossover exhaust)
(Imported)

Mid-USA

Round Oil Tank With Domed Ends Hardbody St,Rigid & Custom Frames Ctr Fill W/BTy Box Cp

MID-86082

$413.40

In Stock

Shipping calculated at checkout.

Round Oil Tank With Domed Ends Hardbody St,Rigid & Custom Frames Ctr Fill W/Bty Box Cp

These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
3.5 quart with battery tray
Lower left hand relief for use with a chain or belt rear drive
The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
Tank body measures 6 ¹/₂ O.D.
Made from 16 gauge steel to resist cracking
100% TIG welded for maximum strength
Includes heavy duty front mount and fill plug
Use with Softail size battery and OE style rear tank mount
Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Chrome Plated Domed Side with Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Mid-USA

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Side Fill With Battery Box

MID-86081

$357.60

In Stock

Shipping calculated at checkout.

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Side Fill With Battery Box

These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
3.5 quart with battery tray
Lower left hand relief for use with a chain or belt rear drive
The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
Tank body measures 6 ¹/₂ O.D.
Made from 16 gauge steel to resist cracking
100% TIG welded for maximum strength
Includes heavy duty front mount and fill plug
Use with Softail size battery and OE style rear tank mount
Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Raw Steel lat Side, Side ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Mid-USA

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Center Fill With Battery Box

MID-86080

$324.20

In Stock

Shipping calculated at checkout.

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Center Fill With Battery Box

These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
3.5 quart with battery tray
Lower left hand relief for use with a chain or belt rear drive
The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
Tank body measures 6 ¹/₂ O.D.
Made from 16 gauge steel to resist cracking
100% TIG welded for maximum strength
Includes heavy duty front mount and fill plug
Use with Softail size battery and OE style rear tank mount
Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Raw Steel lat Side Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Mid-USA

Oe Style Oil Tank,Raw Steel Softail 86/99 Side Fill Rpls Hd 62498-89A

MID-86008

$146.30

In Stock

Shipping calculated at checkout.

Oe Style Oil Tank,Raw Steel Softail 86/99 Side Fill Rpls Hd 62498-89A

3 quart steel tank
aithful copy of the OE oil tank found on all Softail models
Includes fill plug
See the electric section for battery cusion and strap

V-FACTOR
Raw Steel Oil Tank
Fits Softail models 1986/1999
Replaces HD# 62498-89A
(Imported)

Mid-USA

Oil Tank,Oe Style Square Cp BT 4Spd 1965/E1982 Rpls 62610-52Ta 62483-81

MID-86016

$133.65

In Stock

Shipping calculated at checkout.

Oil Tank,Oe Style Square Cp Bt 4Spd 1965/E1982 Rpls 62610-52Ta 62483-81

4 quart capacity
Can be used with the OE metal canister-type oil filter holder but for easy maintenance, use our drop-in oil filter 87110
Oil filter cap 85009 must be ordered separately

Note: Due to inherent oxidation during storage of oil tanks as well as oxidation associated with the chrome plating process, all oil tanks purchased require thorough cleaning with a rust removing chemical liquid prior to use.V-FACTOR
Chrome Plated Oil Tank without cap
Fits Big Twin 4 speed 1965/Early 1982
Replaces HD# 62610-52TA & 62483-81

Mid-USA

Oil Guage Mt Kit T/C With Fitting Rpls Hd# 75133-99

MID-85213

$71.40

In Stock

Shipping calculated at checkout.

Oil Guage Mt Kit T/C With Fitting Rpls Hd# 75133-99

Kit will not work with billet rocker box covers
Comes complete with oil filled gauge and all necessary mounting hardware
Chrome plated mounting bracket
Retains dash light switch
Mount bracket holes measure 3 center to center

V-FACTOR
Oil Pressure Gauge Kit
Fits XD 1998/2005, XST Softail 2000/Later and FLHT & Road King 1999/Later
Replaces HD# 75133-99

Mid-USA

Oil Pressure Gauge Fitting BT Evo 84/L Use W/O Sending Unit Anodized Silver .2038

MID-85207

$37.15

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Fitting Bt Evo 84/L Use W/O Sending Unit Anodized Silver .2038

Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
Available to be used with or without the oil pressure sending unit as listed below
These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
Oil pressure gauge and sending unit not included
Oil pressure sending unit found in the engine section

HARDWARE
Anodized Silver Oil Pressure Gauge itting without sending unit
Fits Big Twin Evolution, all years

Mid-USA

Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013

MID-85204

$8.45

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013

Complete Adapter kits available without oil pressure gauge
or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Oil Pressure Gauge Adapter
Fits Big Twin 1970/1999 (except Twin Cam)

Mid-USA

Oil Pressure Gauge Fitting,Kit Fits Big Twin Case 1936/1969 Chrome Plated Mfg #2014/2015

MID-85203

$13.95

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Fitting,Kit Fits Big Twin Case 1936/1969 Chrome Plated Mfg #2014/2015

Complete Adapter kits available without oil pressure gauge
or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Adapter
Fits Big Twin 1936/1969

Mid-USA

Oil Line Fitting, 90 Degree 5/16 Allen For Use In Close Quarters

MID-85158

$4.20

In Stock

Shipping calculated at checkout.

Oil Line Fitting, 90 Degree 5/16 Allen For Use In Close Quarters

Close quarters 90° oil line fitting for hard to reach areas
⁵/₁₆ allen, ¹/₈-27 NPT

V-FACTOR
Chrome Plated itting
Fits all models
(Imported)

Mid-USA

Oil Filler Spout Chrome Plated Flht FLHR FLTR 1993/2006 Inc Gasket & Cp Mnt Hrdw

MID-85156

$53.40

In Stock

Shipping calculated at checkout.

Oil Filler Spout Chrome Plated Flht Flhr Fltr 1993/2006 Inc Gasket & Cp Mnt Hrdw
V-FACTOR
Chrome Plated Spout with Gasket & Chrome Plated Mounting Hardware
Fits FLHT, FLHR & FLTR 1993/2006
Replaces HD# 62420-02
(Imported)

Mid-USA

Oil Tank Mount,Rear Bracket Softail 1984/1999 & Custom Use Chrome Plated,Rpls Hd 62704-84

MID-85150

$36.85

In Stock

Shipping calculated at checkout.

Oil Tank Mount,Rear Bracket Softail 1984/1999 & Custom Use Chrome Plated,Rpls Hd 62704-84

Heavy Duty
A full oil tank can weigh up to 29 pounds, ¹/₄ thick steel construction ensures these brackets will provide the necessary support
Threaded to eliminate the OEM welded-on nuts
Rear bracket is TIG welded

V-FACTOR
Chrome Plated Rear Bracket
Fits Softail 1984/1999
Replaces HD# 62704-84
(Imported)

Mid-USA

Oil Tank Mounts,Fr & Rear Cp Softail 1984/1999 Replaces Hd 62704-84 62707-84

MID-85148

$47.85

In Stock

Shipping calculated at checkout.

Oil Tank Mounts,Fr & Rear Cp Softail 1984/1999 Replaces Hd 62704-84 62707-84

Designed like the OE parts
Includes well nuts like their stock counterpart
Rear mount is ³/₁₆ thick
Front mount is ¹/₈ thick

V-FACTOR
Chrome Plated Rear & ront Mounts
Fits Softail models 1984/1999
(Imported)

Mid-USA

Oil/Fuel Fitting,1/8" Male Npt Npt To 1/4" Straight Hose Nipple Chrome Plated Mfg .2026

MID-85133

$6.50

In Stock

Shipping calculated at checkout.

Oil/Fuel Fitting,1/8" Male Npt Npt To 1/4" Straight Hose Nipple Chrome Plated Mfg .2026
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Straight Hose Nipple
¹/₈ NPT Male to ¹/₄ Nipple

Mid-USA

Oil/Fuel Fitting,1/8" Male Npt Npt To 1/4"Od 90 Degree Hose Nipple Chrome Plated Mfg .2034

MID-85145

$40.60

In Stock

Shipping calculated at checkout.

Oil/Fuel Fitting,1/8" Male Npt Npt To 1/4"Od 90 Degree Hose Nipple Chrome Plated Mfg .2034
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated 90° Hose Nipple
¹/₈ NPT Male to ¹/₄ 90° Nipple
Package of 5

Mid-USA

Oil Pressure Gauge Fitting,Kit Evo Big Twin W/Rocker Box Bracket Chrome Mfg .2024

MID-85131

$36.75

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Fitting,Kit Evo Big Twin W/Rocker Box Bracket Chrome Mfg .2024

Fits into the engine case and the oil pressure gauge bolts to the rocker box using strap
Complete with chrome plated adapters and oil line to place the oil pressure gauge within easy sight
Oil gauge is not included

HARDWARE
Chrome Plated Kit
Fits Big Twin Evolution, all years

Mid-USA

Oil Pressure Gauge Fitting,Rkr Sh & Ihd Spt Late 1971/Later Hex Head Chromed......Mfg.2021

MID-85130

$34.95

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Fitting,Rkr Sh & Ihd Spt Late 1971/Later Hex Head Chromed......Mfg.2021

Mounts on rocker box
Enables you to watch your oil pressure while riding your bike
Replaces the rocker arm shaft end plug and clear all seats and gas tanks
Installation instructions included

HARDWARE
Chrome Plated Hex Head
Fits Shovelhead & Ironhead Sportster Late 1971/Later

Mid-USA

Oil & Fuel Fitting Strt Cp L/8"Npt To 3/8"Od Nipple See *N* For Use Rpls 63533-41

MID-85115

$5.35

In Stock

Shipping calculated at checkout.

Oil & Fuel Fitting Strt Cp L/8"Npt To 3/8"Od Nipple See *N* For Use Rpls 63533-41
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Straight Hose Nipple
¹/₈ NPT Male to ³/₈ Nipple
Fits K Model & Sportster 1967/1976, Dyna 1991/1998, FLT models 1993/1998, L & X 1965/Later, Softail Early 1984
Replaces HD# 63533-41

Mid-USA

Oil Line Fitting,Pump & Tank BT 1936/1964 45Ci All Years Cp Replaces Hd 63533-15."Hwd"2010

MID-85105

$25.20

In Stock

Shipping calculated at checkout.

Oil Line Fitting,Pump & Tank Bt 1936/1964 45Ci All Years Cp Replaces Hd 63533-15."Hwd"2010

Exact duplicate of the original type used
Use with braided stainless steel or stock rigid steel oil lines
Will adapt any ¹/₈ NPT female to Harley-Davidson^® oil lines
itting screws into oil tank and oil pump

HARDWARE
Fits Big Twin 1936/1965 & 45ci, all years
Chrome Plated, Package of 3
Replaces HD# 63533-15

Mid-USA

Magnetic Drain Plug Fits Flt & FXR Mdls 1981/1992 Chrome Plated Oem 722

MID-85036

$11.39

In Stock

Shipping calculated at checkout.

Magnetic Drain Plug Fits Flt & Fxr Mdls 1981/1992 Chrome Plated Oem 722
Chrome plated drain plugs to fit all necessary thread sizesHARDWARE
Chrome Plated Magnetic Head Drain Plug, 1/2-20 thread
Fits FLT & FXR models 1981/1992
Replaces HD# 722

Mid-USA

Magnetic Drain Plug Stock Styl Fits BT 2000/L*, 1/2-20 Thread Zinc Plated Hd# 60328-98A

MID-85032

$8.90

In Stock

Shipping calculated at checkout.

Magnetic Drain Plug Stock Styl Fits Bt 2000/L*, 1/2-20 Thread Zinc Plated Hd# 60328-98A

¹/₂-20 thread and magnetic

Colony
Zinc Stock Style Drain Plug
Fits Big Twin 2000/Later
Replaces HD# 60328-98A

Mid-USA

Magnetic Drain Plug Hex Head 5/8-18 Flt 80/82 FXR 82/94 Hd.706A,720&722A Cad Plated

MID-85023

$10.00

In Stock

Shipping calculated at checkout.

Magnetic Drain Plug Hex Head 5/8-18 Flt 80/82 Fxr 82/94 Hd.706A,720&722A Cad Plated
HARDWARE
Cadmium Plated Magnetic Drain Plug, 5/8-18 thread
Fits FLT 1980/1992 & FXR 1982/1994
Replaces HD# 706A, 720 & 722A

Mid-USA

Oil Drain Plug,Hex Head Chrome 1/8-27 Npt See Oe *N* For App Replaces Hd 45830-48..Mfg.2032

MID-85013

$24.75

In Stock

Shipping calculated at checkout.

Oil Drain Plug,Hex Head Chrome 1/8-27 Npt See Oe *N* For App Replaces Hd 45830-48..Mfg.2032
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Non-Magnetic Hex Head Drain Plug, 1/8-27 NPT Male
Fits K Model, Sportster 1979/Later
Package of 5
Replaces HD# 45830-48

Mid-USA

Oil Tank Fill Plug,Stock Type Fl 70/84 Flt 80/91 XLCH 70/78 FXR 82/L FX 71/L 5-1/8" Stick

MID-85012

$11.30

In Stock

Shipping calculated at checkout.

Oil Tank Fill Plug,Stock Type Fl 70/84 Flt 80/91 XLch 70/78 Fxr 82/L Fx 71/L 5-1/8" Stick
These oil tank filler plugs are available in your choice of 3 different head styles for a variety of applications with center fill or side fill style oil tanks. V-FACTOR
Chrome Plated Smooth type, 5 ¹/₈ dipstick length
Fits L 4 speed 1970/1984, X 1971/1985 (except XST), FLT 1980/1991, FXR 1982/Later, XLCH 1970/1978
Replaces HD# 62625-70A, (Imported)

Mid-USA

Timing & Oil Plug,Acorn Head 5/8-18 Unf See Oem # For Use Hd.706A &.720 Colony 7106-1

MID-85005

$9.13

In Stock

Shipping calculated at checkout.

Timing & Oil Plug,Acorn Head 5/8-18 Unf See Oem # For Use Hd.706A &.720 Colony 7106-1
Colony
Chrome Plated Acorn head, ⁵/₈-18 thread
Replaces HD# 706A, 720 & 722A

Mid-USA

Oil Tank Fill Plug,Stock Type All Models W/Push In Fill Plug No Dipstick Rpls Hd 62644-84T

MID-85002

$6.70

In Stock

Shipping calculated at checkout.

Oil Tank Fill Plug,Stock Type All Models W/Push In Fill Plug No Dipstick Rpls Hd 62644-84T
These oil tank filler plugs are available in your choice of 3 different head styles for a variety of applications with center fill or side fill style oil tanks. V-FACTOR
Chrome Plated Smooth type, no dipstick
Fits custom & OE style oil tanks that do not require a dipstick or that a dipstick would interfere with installation
Replaces HD# 62644-84T, (Imported)

Mid-USA

Air Filter Element Uw/#84089 & #84351 No Hd Rpls #

MID-84587

$24.40

In Stock

Shipping calculated at checkout.

Air Filter Element Uw/#84089 & #84351 No Hd Rpls #
K&N brand ilter Chargers^® feature a 10-Year/Million-Mile Limited Warranty, are emissions legal in all 50 states and have been made in the USA for over 40 years

POWER HOUSE filter elements are engineered for increased performance, feature a washable and reusable high flow 4-layer cotton element and a urethane body for maximum life and a precise fit. Made in the U.S.A. with U.S.A. components

V-FACTOR blue filter elements are a quality imported product at an affordable price

These high flow filters are designed to increase performance in both horsepower and throttle response by reducing air flow restriction while maintaining the filtration levels critical to ensure long engine life
Not only will these filters improve the performance of a stock motorcycle, they are necessary when used in conjunction with performance upgrades such as low restriction exhaust, performance cam(s), carburetor kits or hotter ignition systems
eatures a pre-oiled cotton/fabric type element that can be washed and re-oiled up to 25 times before it is considered to be no longer serviceable
or best results when servicing the filter, use our air filter cleaner and filter oil found in the general merchandise section

V-FACTOR
6 1/4 O.D. x 2 3/8 width
Fits Screaming Eagle^® late style
Replacement ilter for 84089 & 84351

Mid-USA

Oval Tapered Air Filter Relacement For K&N Aircharger

MID-84523

$27.50

In Stock

Shipping calculated at checkout.

Oval Tapered Air Filter Relacement For K&N Aircharger
K&N brand ilter Chargers^® feature a 10-Year/Million-Mile Limited Warranty, are emissions legal in all 50 states and have been made in the USA for over 40 years

POWER HOUSE filter elements are engineered for increased performance, feature a washable and reusable high flow 4-layer cotton element and a urethane body for maximum life and a precise fit. Made in the U.S.A. with U.S.A. components

V-FACTOR blue filter elements are a quality imported product at an affordable price

These high flow filters are designed to increase performance in both horsepower and throttle response by reducing air flow restriction while maintaining the filtration levels critical to ensure long engine life
Not only will these filters improve the performance of a stock motorcycle, they are necessary when used in conjunction with performance upgrades such as low restriction exhaust, performance cam(s), carburetor kits or hotter ignition systems
eatures a pre-oiled cotton/fabric type element that can be washed and re-oiled up to 25 times before it is considered to be no longer serviceable
or best results when servicing the filter, use our air filter cleaner and filter oil found in the general merchandise section

V-FACTOR
Replacement for K&N Aircharger & Oval Tapered Air ilter Element

Brand

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Join the K and G Cycles family of friends