Name: Gas Cap W/Paint Saver Ring Cp Fatbob Models Lh82/99(Ex Fuel) Gauge) Non-Yaned Lh Thd
Brand: Mid-USA
SKU: MID-80041
Price: 71.4 USD
Availability: InStock

Mid-USA

Gas Cap W/Paint Saver Ring Cp Fatbob Models Lh82/99(Ex Fuel) Gauge) Non-Yaned Lh Thd

MID-80041

$71.40

In Stock

Shipping calculated at checkout.

Gas Cap W/Paint Saver Ring Cp Fatbob Models Lh82/99(Ex Fuel) Gauge) Non-Yaned Lh Thd

Tamper resistant cap mounts flush with the paint saver ring and requires the spanner key for isntallation and removal of the cap
CNC machined from billet aluminum
Seals are made from fuel resistant viton
The low profile paint saver houses the 1 ¹/₂ diameter locking gas cap

V-FACTOR
Chrome Plated
Non-vented with left hand thread
Fits ab Bob tank models (left side) 1982/Later (except with fuel gauges)
(Imported)

Mid-USA

Gas Cap W/Paint Saver Ring Cp Fatbob Models Rh Spt 82/L* Vented Rh Thd Cnc Billet Alum

MID-80040

$92.00

In Stock

Shipping calculated at checkout.

Gas Cap W/Paint Saver Ring Cp Fatbob Models Rh Spt 82/L* Vented Rh Thd Cnc Billet Alum

Tamper resistant cap mounts flush with the paint saver ring and requires the spanner key for isntallation and removal of the cap
CNC machined from billet aluminum
Seals are made from fuel resistant viton
The low profile paint saver houses the 1 ¹/₂ diameter locking gas cap

V-FACTOR
Chrome Plated
Vented with right hand thread
Fits at Bob models (right side) 1982/Later & Sportster 1982/Later
(Imported)

Mid-USA

Gas Cap, Drop Point All Models 1982/L*, Set Of 2 Knurled Edge, Chrome Plated

MID-80035

$37.00

In Stock

Shipping calculated at checkout.

Gas Cap, Drop Point All Models 1982/L*, Set Of 2 Knurled Edge, Chrome Plated

All Gas Caps are non-ratcheting
Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Gas Cap Set
Style: Drop Point
Fits all models 1982/Later

Mid-USA

Gas Cap, Chrome Star All Models 1982/L* Vented Chrome Plated

MID-80032

$24.33

In Stock

Shipping calculated at checkout.

Gas Cap, Chrome Star All Models 1982/L* Vented Chrome Plated

All Gas Caps are non-ratcheting
Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Gas Cap
Style: Chrome Star, vented only
Fits all models 1982/Later

Mid-USA

Gas Cap, Ray Star All Models 1982/L*, Set Of 2 Machined W/Black Accents

MID-80031

$47.75

In Stock

Shipping calculated at checkout.

Gas Cap, Ray Star All Models 1982/L*, Set Of 2 Machined W/Black Accents

All Gas Caps are non-ratcheting
Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Machined Gas Cap Set
Style: Ray Star
Fits all models 1982/Later

Mid-USA

Gas Cap, Ray Star All Models 1982/L* Vented Machined W/Black Accents

MID-80030

$27.20

In Stock

Shipping calculated at checkout.

Gas Cap, Ray Star All Models 1982/L* Vented Machined W/Black Accents

All Gas Caps are non-ratcheting
Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Machined Gas Cap
Style: Ray Star, vented only
Fits all models 1982/Later

Mid-USA

Spinner Gas Cap,Chrome Plated 1982/Later* Models W/Screw In Right Hand Thread,Billet Alum

MID-80027

$99.90

In Stock

Shipping calculated at checkout.

Spinner Gas Cap,Chrome Plated 1982/Later* Models W/Screw In Right Hand Thread,Billet Alum

CNC machined from billet aluminum
Vented cap with right hand thread
See below for availability of finishes
Cap measures ³/₄ tall (from the gasket surface) and has a 4 ¹/₂ circumference at the spinners

V-FACTOR
Chrome Plated Spinner Gas Cap for 1982/Later style bung

Mid-USA

Gas Cap, Stk Type Chrome Steel Late 1973/1982 Vented Rpls Hd61102-73

MID-80022

$14.10

In Stock

Shipping calculated at checkout.

Gas Cap, Stk Type Chrome Steel Late 1973/1982 Vented Rpls Hd61102-73

The vented cap fits Harley-Davidson® single and at Bob right hand tanks
The non-vented cap fits at Bob left hand tanks

V-FACTOR
Chrome Plated Vented Cap
Fits gas tanks Late 1973/1982
Replaces HD# 61102-73

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-3/4"Offset

MID-79915

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-3/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 1 5/8 wide, 45 tooth. 1 3/4 offset.

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-1/2"Offset

MID-79912

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-1/2"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley Kit. 45 tooth 1 5/8 wide 1 1/2 offset pulley kit.

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1"Offset

MID-79908

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 45 tooth, 1 5/8 wide 1 offset.

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1/2"Offset

MID-79906

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1/2"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley kit. 45 tooth, 1 5/8 wide 1/2 offset.

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1/4"Offset

MID-79905

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 45 tooth, 1 5/8 wide. 1/4 offset.

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-1/4"Offset

MID-79910

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-1/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley Kit. 45 tooth 1 5/8 wide 1 1/4 offset pulley kit.

Mid-USA

Belt Guard,Upper Shorty Style Softail 1986/1999 With 70T Rear Pulley Chrome Plated

MID-78611

$14.70

In Stock

Shipping calculated at checkout.

Belt Guard,Upper Shorty Style Softail 1986/1999 With 70T Rear Pulley Chrome Plated
Whether you just want to clean up the appearance of your rear end or want to show off that custom rear pulley, use this stylish chrome plated 7 long Shorty upper belt guard. Fits all Softail 1986/1999 with 70 tooth rear pulley. (Imported)

Mid-USA

Belt Guard,Upper Custom Shorty Softail 1986/1999 With 70T Rear Pulley Chrome Plated

MID-78610

$65.55

In Stock

Shipping calculated at checkout.

Belt Guard,Upper Custom Shorty Softail 1986/1999 With 70T Rear Pulley Chrome Plated
Designed to show off more of your expensive rear pulley, this full width chrome plated steel belt guard has been reinforced in the critical areas for years of trouble free service and show stopping good looks. Guard covers 15 of the belt and includes mounting hardware. Fits Softail Models 1986/1999 with 70 tooth rear pulley. (Imported)

Mid-USA

Belt Guard,Chrome Plated Fits 2009/L* Touring Models Hd# 60408-09

MID-78606

$47.45

In Stock

Shipping calculated at checkout.

Belt Guard,Chrome Plated Fits 2009/L* Touring Models Hd# 60408-09
V-FACTOR
Chrome Plated Belt Guard
Fits Touring Models 2009/Later
Replaces HD# 60408-09
(Imported)

Mid-USA

Upper Belt Guard Softail 90/99 W/61 T Pulley Rpls Hd 60537-89

MID-78605

$52.20

In Stock

Shipping calculated at checkout.

Upper Belt Guard Softail 90/99 W/61 T Pulley Rpls Hd 60537-89
V-FACTOR
Chrome Plated Upper Guard
Fits Softail 1990/1999 with 61 tooth pulley
Replaces HD# 60537-89
(Imported)

Mid-USA

Upper Belt Guard Softail 86/99 70 Tooth Rpls Hd 60533-86

MID-78604

$53.30

In Stock

Shipping calculated at checkout.

Upper Belt Guard Softail 86/99 70 Tooth Rpls Hd 60533-86
V-FACTOR
Chrome Plated Upper Guard
Fits Softail 1986/1999 with 70 tooth pulley
Replaces HD# 60533-86
(Imported)

Mid-USA

Lower Belt Guard Softail 90/99 61 Tooth Rpls Hd 60394-90A

MID-78603

$48.95

In Stock

Shipping calculated at checkout.

Lower Belt Guard Softail 90/99 61 Tooth Rpls Hd 60394-90A
V-FACTOR
Chrome Plated Lower Guard
Fits Softail 1990/1999 with 61 tooth pulley
Replaces HD# 60394-90A
(Imported)

Mid-USA

Inner Primary Mounting Kit Big Twin 55/69 W/Cast Alum Inner Prim Colony 8798-12

MID-78548

$24.26

In Stock

Shipping calculated at checkout.

Inner Primary Mounting Kit Big Twin 55/69 W/Cast Alum Inner Prim Colony 8798-12
Contains reproduction of OE type hardware to mount the inner primary on Big Twin models 1936/1999 as listed. All external mounting fasteners are chrome plated.Inner primary mounting kit. Fits Big Twin 1955/1969.

Mid-USA

Primary Cvr Part,Cvr Hardware Flt Models 1999/2006 Allen Head Cp Colony 9959-38

MID-78595

$27.75

In Stock

Shipping calculated at checkout.

Primary Cvr Part,Cvr Hardware Flt Models 1999/2006 Allen Head Cp Colony 9959-38
The highest quality U.S. made hardware available in chrome plated by Colony or chrome plated by Gardner-Westcott as indicated by (*) and in stainless steel by AMERICAN MOTORCYCLE HARDWARE. Big Twin. FLT 1999/Later. Allen. Chrome. 38 pieces. No Inner Primary Screws

Mid-USA

Primary Cvr Part,Cvr Hardware Flt FLHR FXR 1985/1998 Allen Head Colony 8916-17

MID-78560

$28.42

In Stock

Shipping calculated at checkout.

Primary Cvr Part,Cvr Hardware Flt Flhr Fxr 1985/1998 Allen Head Colony 8916-17
The highest quality U.S. made hardware available in chrome plated by Colony or chrome plated by Gardner-Westcott as indicated by (*) and in stainless steel by AMERICAN MOTORCYCLE HARDWARE. Big Twin. FLT, FLHR, FXR 1985/1998. Allen. Chrome. 27 pieces. No Inner Primary Screws

Mid-USA

Primary Cvr Part,Cvr Hardware Inner/Outer BT 5 Spd 1980/84 Allen Head Colony 8763-20

MID-78547

$26.40

In Stock

Shipping calculated at checkout.

Primary Cvr Part,Cvr Hardware Inner/Outer Bt 5 Spd 1980/84 Allen Head Colony 8763-20
The highest quality U.S. made hardware available in chrome plated by Colony or chrome plated by Gardner-Westcott as indicated by (*) and in stainless steel by AMERICAN MOTORCYCLE HARDWARE. Big Twin. All models 1980/1984 5 speed transmission. Allen. Chrome. 40 pieces. Includes Inner Primary Screws

Mid-USA

Primary Cvr Part,Cvr Hardware Inner/Outer BT 4 Spd 1970/L Allen Head Colony 8762-17

MID-78546

$22.34

In Stock

Shipping calculated at checkout.

Primary Cvr Part,Cvr Hardware Inner/Outer Bt 4 Spd 1970/L Allen Head Colony 8762-17
The highest quality U.S. made hardware available in chrome plated by Colony or chrome plated by Gardner-Westcott as indicated by (*) and in stainless steel by AMERICAN MOTORCYCLE HARDWARE. Big Twin all models 1970/later. 4 speed transmission. Acorn. Chrome. 32 pieces. Includes Inner Primary Screws

Brand

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Join the K and G Cycles family of friends