Mid-USA

Quiet Clutch Plate Kit For Bdl Round Dog Type Belt Dr Kevlar Based Compound #320750A
Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates incorporate a round dog drive to the outer clutch basket. The friction plates are bonded to aluminum for light weight. See below for availability of plate material. Fits all Round Dog type BDL Belt Drives Alto Clutch Plates
Parts Included:

• 7) Kevlar® Friction Plates
• 7) Splined Steel Plates
• 1) Splined Steel Backing Plate

Clutch Kit Carbon Carbonite Big Twin 1998/Later* Rpls Hd 37932-98 37913-98 Alto

• Alto Carbonite
• Lifetime Warranty
• Extra Capacity for High Torque Transfer
• eature Carbon Carbonite® based friction material for a superior coefficient of fricition while providing a higher temperature capacity
• Single sided friction design (as listed below) provides Carbonite friction material on both the drive plates and the driven plates
• All plates are bonded to Kolene° Melonite° steel discs for reduced expansion under extreme conditions

Extra Plate Kit

• 1.875 Stack Height
• Includes 10 double sided Drive Plates (riction) & 9 Driven Plates (Steel)
• Eliminates the damper spring & damper spring seat
• Fits Big Twin 1998/Later
• Replaces HD# 37932-98, 37913-9

Clutch Plate,Pressure Big Twin 10 Spring Clutch 7/16" Tk Alum Rpls Hd 38010-41
Can be used with any number of long studs on any Big Twin 10 spring clutch. Extra heavy 7/16 thick aluminum will not warp like the OEM stamped steel unit even when used with heavy duty clutch springs. Increases performance and life of clutch plates and springs. or best results, use with our nylon insert hex nuts 06763.

Clutch Plate Kit,Steel Drive Fits Bdl Chain Drive & #73129 Set Of 8 Bdl Cddp-100
Designed to upgrade your entire clutch assembly. Belt Drives Limited (BDL) has added their Competitor Clutch to their newly engineered Clutch Basket. With Fits Kevlar clutch plates this heavy duty assembly offers approximately 60% more surface area than OE. These feature a large 35mm hub bearing and 9 shoulder bolts and springs for accurate spring tension. Baskets include a 36 tooth sprocket. If you have the power...we have the clutch. Belt Drives Ltd.
Replacement steel clutch plates
Set of 8 drive plates

Steel Drive Clutch Plates Use With Bdl Clutch Kit #73127 Set Of 7 Steels, Bdl Cc-100-Cs

• Provides about 60% more friction surface than stock clutches
• Kevlar plates can be run wet or dry
• Accurate spring tension is made possible with 9 coil springs and bolts
• Bolts directly to the clutch basket eliminating the OE clutch hub and loose bearing set up, converting it to a 40mm double row bearing that will not walk out like the OE arrangement
• Can be used with chain or belt primary drive

Belt Drives Ltd.
Replacement steel clutch plate set (includes 7)

Friction Clutch Plate Set, Fits Bdl, Set Of 5, Kevlar Wet Or Dry, Cc-100-Cp

• Provides about 60% more friction surface than stock clutches
• Kevlar plates can be run wet or dry
• Accurate spring tension is made possible with 9 coil springs and bolts
• Bolts directly to the clutch basket eliminating the OE clutch hub and loose bearing set up, converting it to a 40mm double row bearing that will not walk out like the OE arrangement
• Can be used with chain or belt primary drive

Belt Drives Ltd.
Replacement friction clutch plate set (includes 5)

Steel Drive Clutch Plate Use With Bdl Clutch Kit #73110 .120"Plate Bdl Cc-130-Bp

• Included in the clutch pack are 7 kevlar fibers that have 60% more surface area than OE
• Patented ball bearing lock up pressure plate will handle any application up to and including big inch motorsBelt Drives Ltd
  Steel drive clutch plate, .120
  Sold each

Steel Drive Clutch Plates Use With Bdl Clutch Kit #73110 Set Of 6 Steels,Bdl Cc-130-Cs

• Included in the clutch pack are 7 kevlar fibers that have 60% more surface area than OE
• Patented ball bearing lock up pressure plate will handle any application up to and including big inch motorsBelt Drives Ltd
  Steel drive clutch plates (set of 6)

Complete Clutch Kit,Alto Bdl Competitor Chain Drive 7 Friction,8 Steel Plates
Alto Products
Replacement 7 High Energy riction Discs & 8 Steel Plates

Clutch Plate,Steel Backing Fits Bdl Belt Drives W/Cl See Catalog For Fit .. Bdl Edp-200

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

J) Belt Drives Ltd.
1) Splined Steel Backing Plate (.122 Thick)

Kevlar Friction Plate Kit Big Twin 1998/Later*,Set Of Nine Plates, Rpls Hd 37932-98

• Made by one of the largest manufacturers of automotive and motorcycle clutch plates in the world
• Exceed OE specifications in every aspect
• Economically priced
• Limited Lifetime Warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plates only - no labor or other damages

Alto
9 Kevlar riction Plates for wet or dry clutch
Fit Big Twin 1998/Later
Replaces HD# 37932-98

Kevlar Clutch Friction Plates U/W #77203 And #77204 Only Includes 9 Plates Mfg# Tfss-Cp
The 14mm by 3 3/8 belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate. Kit is the complete drive with outboard bearing supports. The outboard bearing support has one bearing to support the transmission mainshaft. The outboard support plate is reversible. The back side is channeled for another distinct look, but just the flat side will be polished.

eatures:

• 14mm x 85mm (3 3/8) wide belt, the same belt as used on top fuel Harley-Davidson^® race bikes
• Kevlar^™ clutch has nine 6 3/8 diameter frictions & eleven steels for ultimate power transfer
• Speciallly manufactured pressure plate uses up to 9 springs for infinite clutch pressure control
• Hub is manufactured from 7075 aluminum and hard anodized for maximum strength and longevity
• 30-46 tooth combo provides 1.53:1 drive ratio

Belt Drives Ltd.
Kevlar Clutch riction Plate Kit (includes 9 plates)
Fits Softail 1990/2006

Clutch Kit,Complete Wet Or Dry Bt 98/L* Kevlar Bonded/Steel Rpls 37392-98 37319-98 Btx-14
Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Kit includes 9 friction plates bonded to tempered steel and 8 tempered steel drive plates. Use without damper spring and retainer. Big Twin 1998/Later.

Clutch Kit,Complete Wet Or Dry Bt L84/89 Kevlar Bonded/Steel Rpls 37931-84 37975-84 Btx-9
Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Kit includes 6 friction plates bonded to tempered steel (25% wider tha OE for maximum surface area) and 7 tempered steel drive plates. Big Twin 1984/1989.

Clutch Kit,Complete Wet Or Dry Bt 41/E84 Extra Plate W/Steels Springs Rpls 37850-68 Btx-5E
Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Extra Plate Kit includes 6 friction plates bonded to 6061-T6 aluminum with 5 tempered steel drive plates and 10 clutch springs. Big Twin 1941/1984.

Clutch Kit Wet Or Dry Bdl Bt 41/E84 Alum Backed Kevlar W/Drive Plt 37850-68 Btx-5
Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Kit includes 5 friction plates bonded to 6061-T6 aluminum and 4 tempered steeld drive plates. 1941/1984.

Clutch Kit Wet Or Dry Bdl Bt 41/E84 Steel Backed Kevlar Rpls Hd 37850-68 Bt-5 Econo
Made with tried and true race proven Kevlar friction material. The Kevlar friction plates can be run dry or an oil bath. They are grooved for maximum oil circulation and heat dissipation. Bonded to your choice of 6061-T6 aluminum for light weight or bonded to high tempered steel for low expansion. All kits are packaged with friction plates and steel drive plates that have a pre-measured stack height for easy installation.Econo Kit includes 5 friction plates bonded to tempered steel. 1941/Early 1984.

Clutch Plate Kit, Steel Drive Plates Bt 68/Early 84 W/Anti-Rattlers Replaces Hd 37975-41 4-Plates

• Made by one of the largest manufacturers of automotive and motorcycle clutch plates in the world
• Exceed OE specifications in every aspect
• Economically priced
• Limited Lifetime Warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plates only - no labor or other damages

Alto
4 Steel Drive Plates with anti-rattlers
Fit Big Twin 1968/Early 1984
Replaces HD# 37975-41

Clutch Plate Kit,Steel Drive Bt 68/L W/O Anti Rattlers Replaces Hd 37975-81 4-Plates

• Made by one of the largest manufacturers of automotive and motorcycle clutch plates in the world
• Exceed OE specifications in every aspect
• Economically priced
• Limited Lifetime Warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plates only - no labor or other damages

Alto
4 Steel Drive Plates without anti-rattlers
Fit Big Twin 1968/Early 1984
Replaces HD# 37975-81

Clutch Kit,Kevlar Big Twin Late 1984/1989 6 Discs Replaces Hd 37931-84

• Made by one of the largest manufacturers of automotive and motorcycle clutch plates in the world
• Exceed OE specifications in every aspect
• Economically priced
• Limited Lifetime Warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plates only - no labor or other damages

Alto
6 Kevlar riction Discs for wet or dry clutch
Fit Big Twin Late 1984/1999
Replaces HD# 37931-84

Clutch Kit,Wet Type Big Twin Late 1984/1989 Rpls Hd37931-84 6-Bonded Discs

• Made by one of the largest manufacturers of automotive and motorcycle clutch plates in the world
• Exceed OE specifications in every aspect
• Economically priced
• Limited Lifetime Warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plates only - no labor or other damages

Alto
6 riction Discs for wet clutch only
Fit Big Twin Late 1984/1989
Replaces HD# 37931-84

Clutch Kit,Wet Or Dry System Big Twin 41/L 10 Spring Clutch Replaces Hd 37850-68 5 Discs

• Made by one of the largest manufacturers of automotive and motorcycle clutch plates in the world
• Exceed OE specifications in every aspect
• Economically priced
• Limited Lifetime Warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plates only - no labor or other damages

Alto
5 riction Discs for wet or dry clutch
Fit Big Twin 1941/Early 1984
Replaces HD# 37850-68
Note: Purchase one 73026 steel drive disc for 1941/1967

Competitor Cl Kit,Wet Or Dry Conversion Kit,Bt 1936/E1984 Chain Or Belt Primary Cc-100-S

• Provides about 60% more friction surface than stock clutches
• Kevlar plates can be run wet or dry
• Accurate spring tension is made possible with 9 coil springs and bolts
• Bolts directly to the clutch basket eliminating the OE clutch hub and loose bearing set up, converting it to a 40mm double row bearing that will not walk out like the OE arrangement
• Can be used with chain or belt primary drive

Belt Drives Ltd.
Competitor Clutch Conversion Kit
Fits Big Twin 1936/Early 1984

Kevlar Friction Plate Set Use With Bdl Clutch Kit #73110 Set Of 7 Fibers,Bdl Cc-130-Cp

• Included in the clutch pack are 7 kevlar fibers that have 60% more surface area than OE
• Patented ball bearing lock up pressure plate will handle any application up to and including big inch motorsBelt Drives Ltd
  Kevlar friction plate set (set of 7)

Competitor Clutch Conversion Bt 98/10,Uw Oe Cl Basket,Inc Ball Bearing Lock Up,Cc-130-Bb

• Included in the clutch pack are 7 Kevlar fibers that have 60% more surface area than OE
• Patented ball bearing lock up pressure plate will handle any application up to and including big inch motors.

BELT DRIVES FLTD.
Competitor Clutch Conversion
Fits Big Twin 1998/2010

Steel Drive Clutch Plate Big Twin 10 Spring Clutch Replaces Hd 37975-81 ....Bts-5
All Clutch Drive Plates are manufactured from high tempered steel to resist warping under extreme conditions. Diaphragm springs are designed 15% stronger than OE springs and can be used for stock replacement or high performance applications. Sold each.BELT DRIVES FLTD 1941/Early 1984 Drive Plate (without anti-rattlers). Big Twin.

Steel Clutch Drive Plate Bt 1998/Later* Including Tc88 Rpls Hd 37319-98 ...... Bts-14
All Clutch Drive Plates are manufactured from high tempered steel to resist warping under extreme conditions. Diaphragm springs are designed 15% stronger than OE springs and can be used for stock replacement or high performance applications. Sold each.Belt Drives Ltd. Steel Drive Plate
Fits Big Twin 1998/Later
Sold each, eight required
Replaces HD# 37319-98

Clutch Releasing Disc Big Twin 10 Spring Clutch Replaces Hd 37871-41
V-FACTOR
Clutch Releasing Disc
Replaces HD# 37871-41
(Imported)

Clutch Spring Plate Big Twin 1990/1997 Spt 1991/L Replaces Hd 37977-90
Alto Clutch Spring Plate
Fits Big Twin 1990/1997 & Sportster 1991/Later
Replaces HD# 37977-90

Clutch Plate,Steel Drive With Rattlers Bt 10 Spring Clutch Replaces Hd 37975-41
Alto Clutch Drive Disc with Anti-Rattlers (Sold Each)
Replaces HD# 37975-41