Mid-USA

Custom Springer Rocker Studs Hardbody Wide Springers & Most Custom Wide Springers,Chrome
HARDBODY
Chrome Plated Rocker Studs (Set of 4)

Threaded diameter is 1/2"
Bearing surface 3/4"

Length of threaded part is 9/16”

HARDBODY

Spring Kit for Springer Forks Use with Most Custom Springers Inc Springs, Rods, Seats & Nuts

Custom Springer Top Stem Nut Use With Most Custom Springers Chrome Plated
HARDBODY
Chrome Plated Top Tree Stem Nut

Springer Neck Stem Sleeve Cp Use With Most Custom Springers Sold Each
HARDBODY
Chrome Plated Neck Stem Sleeve (Sold Each)

Lower External Spring Set Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Lower External Spring Set (Sold as Pair)

Springer Spring Seat Top Use With Most Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Spring Seat Top (Sold as Pair)

Springer Top Tree,Chrome Pl Use With Most Custom Springers Includes Chrome Pinch Bolts
HARDBODY
Chrome Plated Top Tree
Includes Chrome pinch bolts

Bottom Springer Shock Mount Replacement Bottom Shock Mount Used With #35310

• Kit bolts on to HARDBODY Springers for increased ride control
• Excellent upgrade for Springer front forks without built-in shock mounts
• Helps control spring action for a much smoother ride
• Includes mounting hardware

V-FACTOR
Chrome Plated Replacement Bottom Springer Shock Mount (pair)
Fits HARDBODY Springers
(Imported)

Spring Rod Acorn Nut Set 1/2-20 Thread,Custom Springers
HARDBODY
Chrome Plated Spring Rod Nut
1/2-20 Acorn Nut Pair

Springer Left Lower Rocker, Cp Use With Most Custom Springers Includes Installed Bushings
HARDBODY
Chrome Plated Left Lower Rocker

Lower Internal Spring Set Cp Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Lower Internal Spring Set (Sold as Pair)

Upper Internal Spring Set Cp Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Upper Internal Spring Set (Sold as Pair)

Springer Part,Stem Nut Stk Big Twin 30/48 Oe Springer Rpls Hd 46561-36 Colony 8484-1
Colony
Chrome Plated Stock Style Stem Nuts
Fits Big Twin
Replaces HD# 2759-36A & 46561-36

Front Axle For Springer. Copper, fits Most custom springers

HARDBODY
Copper 3/4" O.D. ront Axle Kit
Includes axle, spacers & nuts

Springer Shock Mnt Kit,Black Fits Hardbody Springers And Custom Applications

• Kit bolts on to HARDBODY Springers for increased ride control
• Excellent upgrade for Springer front forks without built-in shock mounts
• Helps control spring action for a much smoother ride
• Includes mounting hardware

HARDBODY
Black Shock Mount Kit
Fits HARDBODY Springers

Springer Shock Mnt Kit, Chrome Fits Hardbody Springers And Custom Applications

• Kit bolts on to HARDBODY Springers for increased ride control
• Excellent upgrade for Springer front forks without built-in shock mounts
• Helps control spring action for a much smoother ride
• Includes mounting hardware

HARDBODY
Chrome Shock Mount Kit
Fits HARDBODY Springers

Springer Part,Stem Nut Acorn 45Ci All Years Springer Forks Rpls Hd 46550-40 Colony 8008-1
Colony
Chrome Plated Acorn Style ⁷/₈-24 I.D. thread
Fits 45ci Springer, all years
Replaces HD# 46550-40

Springer Front Legs,Std Length Custom Use Raw Steel

• Add a custom look to your HARDBODY or DNA custom springer
• These raw front legs are USA made and can be painted, powder coated, chromed, left raw or whatever you prefer
• These endless possibilities offer a look, a look unique to you, for that one of a kind springer you've been looking for
• Includes spring rods

LED Sled Customs
Raw ront Legs
Standard Length

Antique Springer 18" Black Big Twin Custom Application Includes Axle Kit

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Gloss Black Springer, 18 length

Antique Springer 26" Blk Big Twin Custom Application Black Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Gloss Black Springer, 26 length

Antique Springer 24" Blk Big Twin Custom Application Black Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Gloss Black Springer, 24 length
Note: Same as modern XST Softail

Antique Springer 22" Blk Big Twin Custom Application Black Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Gloss Black Springer, 22 length

Antique Springer 26" Cp Big Twin Custom Application Chrome Finish

• Fully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparable to vintage L model fork length
• 1" O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4" between the axle rockers (Cast rockers)
• Includes 3/4" O.D. axle
• Rise mounts are on 4 3/4" centers and threaded 1/2"-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8" hole)

HARDBODY
Chrome Plated Springer, 26" length

Antique Springer 24" Cp Big Twin Custom Application Chrome Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Chrome Plated Springer, 24 length
Note: Same as modern XST Softail

Antique Springer 22" Cp Big Twin Custom Application Chrome Finish

• Fully assembled with in-line top bracket without built in rake (0° rake)
• The standard-length Springer (20 measured from the bottom of the lower tree to the axle center) is comparable to vintage L model fork length
• 1" O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4" O.D. axle
• Rise mounts are on 4 3/4" centers and threaded 1/2"-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Chrome Plated Springer, 22" length

Antique Springer 20" Cp Big Twin Custom Application Chrome Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Chrome Plated Springer, 20 length
Note: Same as vintage L