Battery Chargers

OPTIMATE 9.5 AMP LITHIUM BATTERY CHARGER, MODEL TM-271, WITH BMS RESET

• Ultimate LiFePO4 professional level battery charger. High efficiency diagnostic charger and tester for LiFePO4 / LFP batteries.


• Perfect for charging and seasonal maintenance of a 12.8V-13.2V LiFePO4 / LFP battery sized from 2.5 to 200 Amp-hour.


• SAVE : Low Volt Start of 0.5V + 3-step low volt SAVE and TEST; CHARGING AMPS: 9.5A (AmpMatic).


• IDEAL FOR: LiFePO4 (LFP) 4 series batteries from 2 – 100Ah; INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.


• USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C); STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector; Weatherproof battery lead & standard battery clip set included.


• Weight: 3 pounds

OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery in a way no other charger did before!

The OptiMate lithium will protect your investment and guarantee your Lithium Iron Phosphate (LiFePO4 / LFP) battery will perform as advertised for a very long time.

With 9.5 Amps of charge current available OptiMate lithium unique multi step
ampmaticTM program recharges and balances cells within the battery quickly and efficiently.

OptiMate lithium’s maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge.

OptiMate lithium – Battery Performance Guaranteed!

Special features:

•Battery SAVE mode with BMS reset : starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented.
•safeTº :Automatic charge rate adjustment to ambient temperature sensed at the charger. Reduced charging below freezing, no charging if temperature is below -20ºC/-4ºF (can damage lithium batteries).
•Ampmatic : Microprocessor adjusts current to ideal LiFePO4 charge curve to match battery size / condition, for fastest and most complete charge.
•Protection against incorrect voltage selection : With 16V selected and a 12.8V (4s) battery is connected OptiMate 7 LFP Select will immediately warn that a low voltage is sensed and then not proceed to charging. USER must confirm the nominal voltage of the connected battery is 16V (5s) before SAVE mode activates. During SAVE mode the charge curve is tracked, if the battery appears to be less than a 5-series 16V battery, it will stop charging.
•CHARGING AMPS : 9.5A @ 12.8V / 7.5A @ 16V (AmpMatic)
•USE : Indoor / Outdoor (lowest temperature: -4°F / -20°C).
•SAVE : Low Volt Start of 0.5V + 3-step low volt SAVE and TEST.
•IDEAL FOR : LiFePO4 (LFP) 4s / 5s batteries from 2.5 – 200Ah.
•INPUT : Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.
•STYLE : Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. 3-year limited replacement warranty.

V-Twin Manufacturing Battery Tender Jr,12V - Sold Each
Battery tender junior 12 volt constantly monitors the battery without the damaging effects of a trickle charger. This tender is compact size for hard to fit spots. Perfect for all lead-acid sealed maintenance free and gel call batteries. F

V-Twin Manufacturing Battery Tender Plus 12V - Sold Each
Super smart battery tender constantly monitors the battery without the damaging effects of a trickle charger. Initial charge brings battery up to full charge than converts to a float charger keeping a 12V battery at 13.6 volts. This is a 1.25 amp bat

Battery Charger/Maintainer All 12 Volt Batteries, 1 Amp Yua1201000

• 3 stage charge cycle
• Easy to use
• Simply attach to battery and plug in
• Charges and maintains your battery
• 3 color LED displays your charge status at a glance
• Reaches 14.4 volt peak then automatically switches to maintenance mode
• Designed to prevent overcharging

Yuasa
1 Amp Battery Charger
Includes quick connect adapter & alligator clips

Battery Charger, Automatic 2 Stage, 12 Volt, 3/4 Amp Permanent & Quick Disconnect

• Wall mount type charger plugs into any 2 or 3 hole 110 volt AC receptacle and includes 13 feet of cord
• Two color LED indicates the charging status at a glance
• Battery connection can be made with the alligator clips or permanently with the eyelet terminals
• Male/female connector is compatable with OEHarley plug
• loat mode prevents overcharging

Power Station
Measures 2 long x 2 wide x 3 tall

V-Twin Manufacturing Battery Booster Cable Set - Sold Each
Battery Booster Cable Set. 10 feet in length. 10 gauge in size.