Cam Tools

Harley-Davidson Cam Tools from K and G Cycles!
11 products

11 products

Sold Out
Cam Bearing Installer All Twin Cams Jims 787
Mid-USA
$302.55
Quick view
FEULING OIL PUMP CORP. Reamer Tool For Cam Plate Relief Valve Bore, made in the usa, Each, specific application, Harley 99-15 FX 99-15 FL
Feuling Oil Pump Corp.
$119.95
Quick view
Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290
Mid-USA
$484.35
Quick view
Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285
Mid-USA
$79.95
Quick view
Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277
Mid-USA
$284.85
Sold Out
Engine Tool,Inner Cam Bearing Twin Cam 99/06 Except 06 Dyna Jims 1279
Mid-USA
$260.25
Quick view
Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283
Mid-USA
$78.05
Sold Out
Cam Bearing Puller Tool BT 1958/Later*(Ex Tc88)Remove Case Bearing....Jims 95760-Tb
Mid-USA
$273.30
Quick view
Cam Bushing Line Reamer BT 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70
Mid-USA
$446.71
Quick view
Cam Brng Installation Tool BT 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188
Mid-USA
$239.95
Quick view
Engine Tool,Camshaft Bearing BT 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60
Mid-USA
$113.20
FEULING OIL PUMP CORP. Reamer Tool For Cam Plate Relief Valve Bore, made in the usa, Each, specific application, Harley 99-15 FX 99-15 FL Garage and Shop Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. Reamer Tool For Cam Plate Relief Valve Bore, made in the usa, Each, specific application, Harley 99-15 FX 99-15 FL

DS-38010252

$119.95

In Stock

Save $-119.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. Reamer Tool For Cam Plate Relief Valve Bore, made in the usa, Each, specific application, Harley 99-15 FX 99-15 FL
  • Use this reamer to perform a 'valve job' on the pressure relief valve seat of any Twin Cam engine cam plate
  • Can be used on OEM or aftermarket cam plates
  • To use, lightly machine the cam plate relief valve seat and re-seat the plunger valve
  • Best used in conjunction with Feuling pressure testing tool PART #3801-0071
Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290

MID-60834

$484.35

In Stock

Save $-484.35
/
Shipping calculated at checkout.
Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290
  • Designed to locate the cam gear on any single cam and duplicate the exact position when installing that gear on another cam shaft
  • Allows you to preserve the cam gear to pinion gear fit when installing a different cam
  • Not only can you install the gear in the exact same position, this tool allows you to advance or retard the gears position by up to 10° with an accuracy of 1/4 of a degree
  • A shop press will be required for the gear removal and installation
  • Complete instructions are included
Note: Proper gear to shaft press fit is .0017 through .0025Jims
or Big Twin models 1970/1999 with single cam
Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285

MID-60831

$79.95

In Stock

Save $-79.95
/
Shipping calculated at checkout.
Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Camshaft/Crankshaft Locking Tool
Fits Twin Cam 1999/2006 (except 2006 Dyna)
Precision tool allows the technician to lock the camshaft and crankshaft sprockets to properly remove, replace and torque the sprocket bolts. Tool is made from non-marring delrin
Replaces HD# 42314
Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277

MID-60829

$284.85

In Stock

Save $-284.85
/
Shipping calculated at checkout.
Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Camshaft Remover & Installation Tool
Multifunction tool will remove and replace front and rear camshafts and the ball bearings. It provides the precision alignment of the camshaft to insure a smooth press in and out of the support plate
Replaces HD# 43644
Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283

MID-60827

$78.05

In Stock

Save $-78.05
/
Shipping calculated at checkout.
Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Cam Chain Tensioner Tool
Tool will unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams and can also check spring loads on chain tensioners
Replaces HD# 42313
Cam Bushing Line Reamer BT 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Bushing Line Reamer BT 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70

MID-60790

$446.71

In Stock

Save $-446.71
/
Shipping calculated at checkout.
Cam Bushing Line Reamer Bt 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70
  • Used to line ream and finish fit gear cover cam bushing
  • This tool pilots off of the cam bearing for a true centerline.
  • A must have tool to do a professional job
Jims
Fits Big Twin 1970/Later (except Twin Cam)
Cam Brng Installation Tool BT 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Brng Installation Tool BT 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188

MID-60767

$239.95

In Stock

Save $-239.95
/
Shipping calculated at checkout.
Cam Brng Installation Tool Bt 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188
This tool easily installs the bearing to the proper depth and alignment without damaging the bearing. Jims
Fits all Big Twin 1958/Later (except Twin Cam)
Engine Tool,Camshaft Bearing BT 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Camshaft Bearing BT 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60

MID-60749

$113.20

In Stock

Save $-113.20
/
Shipping calculated at checkout.
Engine Tool,Camshaft Bearing Bt 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60
  • Meets or exceeds original factory specifications for years of dependable service
  • Used to install all Torrington style camshaft needle bearings into right case
  • Use with 60751 universal driver tool which can be found in the general merchandise section
Jims
Fits Big Twin 1958/Later (except Twin Cam)
Replaces HD# 97272-60