Motorcycle Cylinder Head Gaskets for Harleys

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

Teflon head gasket with fire ring .062 thick
Sold as a pair.

• CM-20 is a perforated steel core gasket which allows heat to be drawn away from the combustion ring while dissipating heat evenly across the gasket surface
• Hot spots that lead to head gasket failure are eliminated
• CM-20's elastomer surface provides maximum sealing characteristics and sealing around passages that carry oil
• All gaskets listed are .043 thick and feature a steel fire ring at the combustion area to help prevent blown head gaskets

• 3 Piece Design
• Extreme Sealing Technology (EST) will eliminate head gasket problems
• These are the best that we have ever seen for everything from 8.5:1 compression ratio up to 15:1 plus
• Three piece design features an aluminized stainless steel center sandwiched between two NBR coated stainless spring steel outer layers
• To ensure the utmost sealing power, the outer layers are embossed at the cylinder bore and the oil drain backs provide a seal so good that O rings are not required
• Distributes heat exceptionally well from the head to the cylinder, thus eliminating hot spots that would normally cause a head gasket failure

• Designed to eliminate sealing problems found in high compression engines
• Sets include .010 soft aluminum base gaskets, solid malleable copper head gaskets with thickness as listed and Viton O rings

• Designed to eliminate sealing problems found in high compression engines
• Sets include .010 soft aluminum base gaskets, solid malleable copper head gaskets with thickness as listed and Viton O rings

• Positive O-ring seal ensures leak-free operation
• Can be installed with the stock engine in the frame in most applications
• Include rocker boxes, gaskets and mounting bolts
• Assembler must supply rocker shafts and rocker arms for all rocker boxes
• Rocker arm supports included
• Installation on Buell models requires removal of some material from the front motor mount
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• Selection of high-quality Genuine James gaskets, seals and O-rings
• Our deep inventory, wide selection, fast shipping and friendly service makes stocking easy
• Made in the U.S.A.

• Selection of high-quality Genuine James gaskets, seals and O-rings
• Our deep inventory, wide selection, fast shipping and friendly service makes stocking easy
• Made in the U.S.A.

• Drag Specialties has all your gasket needs covered
• All are top-quality Genuine James gaskets, seals and O-rings
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.