Flywheels and Related

S&S CYCLE Replacement Flywheel Assembly With Sprocket Bearing Race, Harley 07-16 FX 07-16 FL

• S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
• Flywheel assemblies are designed for use with OEM-style roller sprocket shaft bearings or with Timken bearing conversion (07-15)
• Fit directly in stock crankcases with no modifications
• For 88", 95" and 100" displacement in Twin Cam A and B motors with 4" stroke, and 96"/103" Twin Cam A and B motors with 43/8" stroke
• Made in the U.S.A.

S&S CYCLE Replacement Flywheel Assembly With Sprocket Bearing Race, Harley 07-16 FX 07-16 FL

• S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
• Flywheel assemblies are designed for use with OEM-style roller sprocket shaft bearings or with Timken bearing conversion (07-15)
• Fit directly in stock crankcases with no modifications
• For 88", 95" and 100" displacement in Twin Cam A and B motors with 4" stroke, and 96"/103" Twin Cam A and B motors with 43/8" stroke
• Made in the U.S.A.

S&S CYCLE Replacement Flywheel Assembliy, stroke 4", Harley 03-06 FX 03-06 FL

• S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
• Flywheel assemblies are designed for use with OEM-style roller sprocket shaft bearings or with Timken bearing conversion (07-15)
• Fit directly in stock crankcases with no modifications
• For 88", 95" and 100" displacement in Twin Cam A and B motors with 4" stroke, and 96"/103" Twin Cam A and B motors with 43/8" stroke
• Made in the U.S.A.

S&S CYCLE Replacement Flywheel Assembliy, stroke 4", Harley 03-06 FX 03-06 FL

• S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
• Flywheel assemblies are designed for use with OEM-style roller sprocket shaft bearings or with Timken bearing conversion (07-15)
• Fit directly in stock crankcases with no modifications
• For 88", 95" and 100" displacement in Twin Cam A and B motors with 4" stroke, and 96"/103" Twin Cam A and B motors with 43/8" stroke
• Made in the U.S.A.

S&S CYCLE 106" Twin Cam Stroker Flywheel Kit, Harley 00-06 FX 00-06 FL

• Feature three-piece assembled flywheels with shafts
• Do not require any motor case modification
• 41/2" stroke
• 103" stock motors or motors with factory 95" kits require piston kit only; stock or S&S cylinder heads can be used
• Stock cylinders will require boring to 3.875"
• For replacement piston rings, see page ???
• Made in the U.S.A.

S&S CYCLE 106" Twin Cam Stroker Flywheel Kit, Harley 99-05 FX 99-06 FL

• Feature three-piece assembled flywheels with shafts
• Do not require any motor case modification
• 41/2" stroke
• 103" stock motors or motors with factory 95" kits require piston kit only; stock or S&S cylinder heads can be used
• Stock cylinders will require boring to 3.875"
• For replacement piston rings, see page ???
• Made in the U.S.A.

S&S CYCLE 106" Twin Cam Stroker Flywheel Kit, Harley 06-16 FX 07-16 FL

• Feature three-piece assembled flywheels with shafts
• Do not require any motor case modification
• 41/2" stroke
• 103" stock motors or motors with factory 95" kits require piston kit only; stock or S&S cylinder heads can be used
• Stock cylinders will require boring to 3.875"
• For replacement piston rings, see page ???
• Made in the U.S.A.

S&S CYCLE Replacement Flywheel Assembly, stroke 4", Harley 00-02 FX 00-02 FL

• S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
• Flywheel assemblies are designed for use with OEM-style roller sprocket shaft bearings or with Timken bearing conversion (07-15)
• Fit directly in stock crankcases with no modifications
• For 88", 95" and 100" displacement in Twin Cam A and B motors with 4" stroke, and 96"/103" Twin Cam A and B motors with 43/8" stroke
• Made in the U.S.A.

S&S CYCLE Replacement Flywheel Assembliy, stroke 4", Harley 99-02 FX 99-02 FL

• Feature three-piece assembled flywheels with shafts
• Do not require any motor case modification
• 41/2" stroke
• 103" stock motors or motors with factory 95" kits require piston kit only; stock or S&S cylinder heads can be used
• Stock cylinders will require boring to 3.875"
• For replacement piston rings, see page ???
• Made in the U.S.A.

S&S CYCLE Replacement Flywheel Assembly Without Sprocket Bearing Race, stroke 4 3/8", Harley 07-16 FX 07-16 FL

• S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
• Flywheel assemblies are designed for use with OEM-style roller sprocket shaft bearings or with Timken bearing conversion (07-15)
• Fit directly in stock crankcases with no modifications
• For 88", 95" and 100" displacement in Twin Cam A and B motors with 4" stroke, and 96"/103" Twin Cam A and B motors with 43/8" stroke
• Made in the U.S.A.

S&S CYCLE Replacement Flywheel Assembly Without Sprocket Bearing Race, stroke 4 3/8", Harley 07-16 FX 07-16 FL

• S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
• Flywheel assemblies are designed for use with OEM-style roller sprocket shaft bearings or with Timken bearing conversion (07-15)
• Fit directly in stock crankcases with no modifications
• For 88", 95" and 100" displacement in Twin Cam A and B motors with 4" stroke, and 96"/103" Twin Cam A and B motors with 43/8" stroke
• Made in the U.S.A.

S&S CYCLE Flywheel Assembly, Bottom End Kit, made in the usa, Steel, Each, specific application, Standard, Harley 84-00 FX 84-99 FL 87 - 94 XL

• Made of high-strength forged steel and designed for stock and high-performance custom applications
• Special keyed 6 large diameter taper sprocket shaft that provides more contact area for increased strength
• Standard S&S tapered crankpin and pinion shaft are used for ease-of-service
• 8.5" diameter with 4.25" stroke
• Kit comes fully assembled, trued and balanced to stock H-D 80" pistons
• Includes flywheel, crankpin and connecting rods
• Made in the U.S.A.

S&S CYCLE Crankpin Assembly, Harley 81 - 99 XL

• Include crankpin
• Made in the U.S.A.

S&S CYCLE Crankpin Assembly, Over-size, Each, size +.001", Harley 79-00 FX 81-99 FL 87 - 94 XL

• Include crankpin
• Made in the U.S.A.

S&S CYCLE Crankpin Assembly, Standard, Each, Harley 79-00 FX 81-99 FL 87 - 94 XL

• Include crankpin
• Made in the U.S.A.

Key Woodruff Style See Oem # Or *N* For Usage Replaces Hd 26348-15
Jims shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes, and heat treated to make these nuts the toughest and best available on the market.HARDWARE
Gear Shaft Key fits Shovelhead 1968/1984, Big Twin Evolution 1984/1999 & OHV Big Twin 1936/1967
Key fits Big Twin Late 1975/1986 Inside Key
Package of 10
Replaces HD# 26348-15

Crank Pin Nuts Big Twin Late 1983/1999 Replaces Hd 23969-83...Jims
We carry only USA made crank pins and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our crank pins and flywheel shafts include our 3 hole crank pin design for equal distribution of oil, special thread annealing to withstand extra nut torque, low friction 16 microfinish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003, and super tough, aircraft rated Durabar 60® steel. Our crank pin nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. In addition, Accel Super Shafts and Crank Pins have a LIETIME REPLACEMENT WARRANTY! rom completely stock to fully modified, Accel's new line of American made severe service crank pins are ultra tough, precision machined and backed with the industry's only lifetime replacement warranty on crank pins.JIMS Crank pin Nuts. Big Twin Late 1983/1999 (except Twin Cam 88) 3 hole. Sold in packages of 2

Engine Part,Flywheel T.Washers Bt 41/Early 70 W/Steel Roller Retainers Rpls Hd 23973-41
Jims shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes, and heat treated to make these nuts the toughest and best available on the market.HARDWARE lywheel thrust washers 1941/Early 1970. Used with steel roller retainers. Sold in packages of 2

V-Twin Manufacturing Replica 4.250" Stroke Flywheel Set fits 1973-1999 - PR
Replica 4.250" Stroke Flywheel Set Replica flywheel set with a 4.250" stroke and a 6ø taper for shafts with cast construction top. The sprocket shaft side of the flywheel is wide style. Accepts OE style components for 80" engine. Sold as a

V-Twin Manufacturing Replica 3.968" Stroke Flywheel Set - Set
OEM No: 23940-41 Replica flywheel set with 3.968 stroke features cast forge construction to accept OE style components for 74" engine. The pin for the outer thrust washers have an outer diameter of 1/8" and are 1/2" long with an outside length o

V-Twin Manufacturing 1972-1979 Washer-Inside Flywheel, .005 O.S. XL - Set

Flywheel crank pin thrust washers are .005 oversize and made of bronze.
Sold as a pair.
OEM: 23972-72

XL 1972-1979 Early 1979

V-Twin Manufacturing Flywheel Washers, Bronze, 1987-up XL - Set

Flywheel crank pin thrust washers is standard size and made of bronze.
Sold as a pair.
OEM: 6508

XL 1987-1999

V-Twin Manufacturing Inside Flywheel Crank Pin Washers, Bronze, 1972-E79 .062 XL - Set

Flywheel crank pin thrust washers are .062 size and made of bronze.
Sold as a pair.
OEM: 23972-72

XL 1972-1978

V-Twin Manufacturing Complete Flywheel Assembly 77-80 XL S&S Motorshop Ready - Set

Motorshop ready stock flywheel assembly is shipped assembled and trued with shafts.

XL 1977-1980

V-Twin Manufacturing Complete Flywheel Assembly 57-76 XL S&S Motorshop Ready - Set

Motorshop ready flywheel assembly is shipped assembled and trued with shafts.

OEM: 23900-57A

XL 1957-1976

V-Twin Manufacturing Replica 3.968" Stroke Flywheel Set fits FL 1956-1969 - Set
Replica 3.968" Stroke Flywheel Set Flywheel set with a 3.968" stroke features cast construction to accept OE style components for 74" engine. Fits: FL 1956-1969 UOM: 1 - SET Country of Origin: Imported

V-Twin Manufacturing Stock Flywheel Assembly, 1984-90 80 , TC - Sold Each

Stock flywheel assembly is assembled and trued with shafts.

FXST 1984-1990
FLT 1984-1990
FXR 1984-1990
FLST 1986-1990

V-Twin Manufacturing Stock Flywheel Assembly, 1993-99 Evo, TC - Sold Each

Shipped assembled and trued with shafts. Features replaceable pinion and sprocket shafts.

OEM: 23906-93B

FXST 1993-1998
FLST 1993-1998
FLT 1993-1998 Carbureted models only
FXD 1993-1998
FXR 1993-1994

Tech Note:

Re

V-Twin Manufacturing Flywheel Set Only, 1982-85 XL - Set

Flywheel set features original weight right and left sides.

OEM: 23916-81

XL 1981-1985

V-Twin Manufacturing Flywheel Set (Left & Right), 1957-80 XL - Set

Flywheel set features original weight right and left sides.

OEM: 23916-57A

XL 1957-1980