Motorcycle Footboards - FL

Short front footboard stud is for the right side.

OEM: 50657-70A

• Made of billet aluminum with a black finish
• Raises accessory floorboards 11/2" (not included)
• Can also be rotated to move floorboards slightly forward and raised approximately 3/4
• Mounting hardware and instructions included
• Made in the U.S.A.

• CNC-machined from billet aluminum
• Can be adjusted up to 1" forward or back of the stock floorboard position
• Uses OEM mounting hardware
• Available either finned or dimpled
• Made in the U.S.A.

• CNC-machined from billet aluminum
• Can be adjusted up to 1" forward or back of the stock floorboard position
• Uses OEM mounting hardware
• Available either finned or dimpled
• Made in the U.S.A.

• Kit is designed to allow for better spacing between the rider floorboard, brake lever, and front exhaust down tube when using Vance & Hines full systems, Dresser Duals and Power Dual headpipe applications on CVO models

• Machined from 6061 T-6 billet aluminum
• Replace stock H-D boards; mount like stock with stock hardware
• Driver floorboards are extended 21/2" in the front and rear and are 3/4" wider than stock floorboards
• Passenger floorboards are extended 19/16" longer in the front and 19/16" longer in the rear
• Feature multi-directional slip-resistant black pyramid-top rubber inserts
• Available in chrome or Night Series (black anodized and then machined again, yielding a contrast of black anodized and raw aluminum finish)
• Sold in pairs
• Made in the U.S.A.

• CNC-machined from solid 6061 T-6 aluminum
• Super-strong yet very lightweight design
• Comfortable serrated foot surface area gives good "bite" to the bottom of the boot
• Exclusive pitch adjustment allows you to change the angle of the floorboard so it sits in a "level" riding position
• Installs with stock mounting hardware
• Measure 13.5" L x 4.75" W
• Sold in pairs
• Made in the U.S.A.

• CNC-machined from solid 6061 T-6 aluminum
• Super-strong yet very lightweight design
• Comfortable serrated foot surface area gives good "bite" to the bottom of the boot
• Exclusive pitch adjustment allows you to change the angle of the floorboard so it sits in a "level" riding position
• Installs with stock mounting hardware
• Measure 13.5" L x 4.75" W
• Sold in pairs
• Made in the U.S.A.

• The perfect fusion of billet and rubber to provide the best in comfort and style
• Each Fusion Series floorboard is machined from 6061 T-6 billet aluminum and features rubber inserts for excellent foot traction
• Three different mounting locations giving 3 of adjustability, allowing you to adjust the floorboard forward and back to obtain your preferred riding position
• Designed to match the Arlen Ness Fusion line of products
• Driver floorboards measure: 13.8" L x 5.0" W
• Sold in pairs
• Made in the U.S.A.

• Traditional D-shaped floorboards feature forged aluminum construction with a chrome finish
• Mount with OEM hardware or Drag Specialties floorboard pivot kit PART #1621-0461
• Inserts are constructed from high-quality rubber and are available in patterns to match 86-05 or 06-16 OEM-style inserts
• Floorboards and inserts are sold in pairs and must be purchased separately

• Traditional D-shaped floorboards feature forged aluminum construction with a chrome finish
• Mount with OEM hardware or Drag Specialties floorboard pivot kit PART #1621-0461
• Inserts are constructed from high-quality rubber and are available in patterns to match 86-05 or 06-16 OEM-style inserts
• Floorboards and inserts are sold in pairs and must be purchased separately

• Traditional D-shaped floorboards feature forged aluminum construction with a chrome finish
• Mount with OEM hardware or Drag Specialties floorboard pivot kit PART #1621-0461
• Inserts are constructed from high-quality rubber and are available in patterns to match 86-05 or 06-16 OEM-style inserts
• Floorboards and inserts are sold in pairs and must be purchased separately

• Stamped steel construction, available with a chrome or black finish
• Driver floorboards have built-in vibration isolating dampeners
• Floorboard inserts are rubber-coated with chrome trim
• Driver floorboards come with mounting hardware
• Matching passenger floorboards and brake pedal pad are available separately
• Floorboards sold in pairs
• Brake pedal pad sold each

• Machined from two pieces of billet aluminum to create a cutting-edge see-through design
• Adds exceptional style and comfort to your bike
• Available in chrome or black anodized finish; black anodized features machined accents on the top, bottom and side of the floorboard
• Includes all mounting hardware
• Matching passenger boards available (sold separately)
• Driver floorboards: 16" L x 6" W x .75" thick; Passenger floorboards: 7" L x 4" W x 1" thick

• Machined from two pieces of billet aluminum to create a cutting-edge see-through design
• Adds exceptional style and comfort to your bike
• Available in chrome or black anodized finish; black anodized features machined accents on the top, bottom and side of the floorboard
• Includes all mounting hardware
• Matching passenger boards available (sold separately)
• Driver floorboards: 16" L x 6" W x .75" thick; Passenger floorboards: 7" L x 4" W x 1" thick

• Machined from two pieces of billet aluminum to create a cutting-edge see-through design
• Adds exceptional style and comfort to your bike
• Available in chrome or black anodized finish; black anodized features machined accents on the top, bottom and side of the floorboard
• Includes all mounting hardware
• Matching passenger boards available (sold separately)
• Driver floorboards: 16" L x 6" W x .75" thick; Passenger floorboards: 7" L x 4" W x 1" thick

• Machined aluminum body with billet hinges
• Foot-cushioning rubber pad
• Sold in pairs
• Made in the U.S.A.

• Classic style that looks great on all bikes
• Chrome or gloss-black powdercoat finish available
• Available with vibration-isolation inserts or plain for a low-profile look
• Install in stock location
• Use OEM brackets and hardware
• Sold in pairs

• Classic style that looks great on all bikes
• Chrome or gloss-black powder coat finish available
• Install in stock location
• Use OEM brackets and hardware
• Sold in pairs

• Classic style that looks great on all bikes
• Chrome or gloss-black powdercoat finish available
• Available with vibration-isolation inserts or plain for a low-profile look
• Install in stock location
• Use OEM brackets and hardware
• Sold in pairs

• Provide better rider comfort by improving foot and leg positioning
• Five quick adjustment positions to suit your needs
• Increased leg room improves leg and knee comfort
• Expanded foot positioning is provided by 13" length, tapering from 4" wide down to 23/8"
• Narrowed design allows for greater lean angles without the risk of touching down
• Polished and chromed billet aluminum construction
• Include stylized vibration-reducing rubber inlays and replaceable rub strips and rubber pads
• Easy to install
• Matching passenger ShortBoards available for a great custom look; see page ???
• Made in the U.S.A.

• Provide better rider comfort by improving foot and leg positioning
• Five quick adjustment positions to suit your needs
• Increased leg room improves leg and knee comfort
• Expanded foot positioning is provided by 13" length, tapering from 4" wide down to 23/8"
• Narrowed design allows for greater lean angles without the risk of touching down
• Polished and chromed billet aluminum construction
• Include stylized vibration-reducing rubber inlays and replaceable rub strips and rubber pads
• Easy to install
• Matching passenger ShortBoards available for a great custom look; see page ???
• Made in the U.S.A.

Chrome D shaped footboard insert set is fitted to an ISO mount footboard top.

Driver upper D shaped footboard plate has ISO buds molded in .
Mat is not replaceable. Plate can be used on all 1974-up type ISO footboards.
OEM: 50614-91A

Chrome billet 'D' shaped footboard set features black molded rubber inserts with a diamond design.

Chrome billet 'D' shaped footboard set features black molded rubber inserts with a rail design.