Fuel & Air Tools

• Gauge attaches magnetically to your machine's fuel tank allowing you to quickly check both Static (idling) and Load (under acceleration) fuel pressure readings
• Use it to diagnose loss of power, poor fuel economy, hesitation and stalling
• Perfect for dyno tuning
• No tools required
• Entire connection and disconnection takes only seconds
• Comes complete with its own storage pouch and O-ring lube
• Made in the U.S.A.

• Provides simple, fast and accurate fuel pressure checks
• Quickly diagnoses loss of power, poor fuel economy and hesitation and stalling
• Includes a solid brass adapter and release valve, steel housing (100 psi) gauge, stainless steel springs, Viton O-rings, O-ring lubricant and nylon storage pouch
• Releases fuel through drain line with the push of a button
• Made in the U.S.A.

• Multi-purpose flexible funnel spout
• Double threads to fit most containers
• Complete with stopper cap and hang tab
• 9.25" length
• 3/4" o.d. tip

• The industrys first and only rebuild kit installation tool
• Provides for fast and easy professional installation of check valve O-Ring (PART #0706-0221) or Rebuild kit (PART #0706-0223) without having to remove tank from the bike
• Made in the U.S.A.

• Simple and easy to use with no tools or modifications needed
• Entire connection and disconnection takes only seconds
• Transfers up to one quart of fuel every 20 seconds; will not stall engine while in use
• Small and compact size, stores anywhere; storage pouch included
• Made in the U.S.A.

• Easily clean most fuel injectors
• Will flush and back flush injectors for best possible cleaning process
• No compressed air required
• Require aerosol can of fuel injection cleaner (not included)
• Push button switch to turn fuel injector on with LED indicator light
• Durable anodized billet aluminum construction
• Built tough for everyday shop use
• Kits include fuel injector cleaner tool, pigtail and 9V battery
• Patent pending

• Easily clean most fuel injectors
• Will flush and back flush injectors for best possible cleaning process
• No compressed air required
• Require aerosol can of fuel injection cleaner (not included)
• Push button switch to turn fuel injector on with LED indicator light
• Durable anodized billet aluminum construction
• Built tough for everyday shop use
• Kits include fuel injector cleaner tool, pigtail and 9V battery
• Patent pending

• Easily clean most fuel injectors
• Will flush and back flush injectors for best possible cleaning process
• No compressed air required
• Require aerosol can of fuel injection cleaner (not included)
• Push button switch to turn fuel injector on with LED indicator light
• Durable anodized billet aluminum construction
• Built tough for everyday shop use
• Kits include fuel injector cleaner tool, pigtail and 9V battery
• Patent pending

• Easily clean most fuel injectors
• Will flush and back flush injectors for best possible cleaning process
• No compressed air required
• Require aerosol can of fuel injection cleaner (not included)
• Push button switch to turn fuel injector on with LED indicator light
• Durable anodized billet aluminum construction
• Built tough for everyday shop use
• Kits include fuel injector cleaner tool, pigtail and 9V battery
• Patent pending

• A must for any Twin Cam engine builder
• Bench test cam plate before installation, set and seal relief valve, set spring pressure to desired pop-off psi; Feuling recommends the cam plate valve be seated 0-30 psi with full pop off at 55-60 psi
• Includes regulator, 0-100 psi pressure gauge, gasket and necessary hardware
• Made in the U.S.A.

FUEL-TOOL Fuel Check Valve Rebuild Kit, made in the USA, Sold Each.

Harley 01-15 FX 01-15 FL

• The industry's first and only rebuild kit
• Eliminate the need for replacing expensive check valve and fuel line when only a rebuild is needed
• Made from long-lasting, high-quality Dupont Viton O-rings, solid brass nickel-plated check valve and stainless steel springs
• Check valve rebuild kit installation tool PART #3850-0215 also available; see HARDWARE CHEMICALS AND TOOLS section
• Made in the U.S.A.

• Convenient kit includes 70 pieces of hardware, a Motion Pro Side Draw Pincer tool and a convenient fuel line clamp size chart

• Have you ever needed to start a bike up without the gas tank on? Most shops have, and this tank will make it safer
• Includes 4 feet of ¹/₄ I.D. fuel line and has a brass bodied in-line petcock
• See through tank holds 2,000 cubic centimeters of fuel and has graduated markings to help verify fuel consumption
• Vented caps screws on to prevent spillage
• Includes a hanger bracket for handlebar mounting and storage