Top End Tools

KIBBLEWHITE Valve Guide Ball Hone 5.5mm, made in the usa, Each

• Durable enough to size C630 bronze and cast iron valve guide materials
• Available from 4mm up to 3/8" widths
• Sold each
• Made in the U.S.A.

MOTION PRO Valve Shim Tool, Steel, Kawasaki 76-02

• For adjusting valve clearance on twin cam models
• Hold valve spring bucket down so adjusting shims can be removed
• Manufactured of hardened alloy steel

MOTION PRO Valve Shim Tool, Steel, Yamaha

• For adjusting valve clearance on twin cam models
• Hold valve spring bucket down so adjusting shims can be removed
• Manufactured of hardened alloy steel

MOTION PRO Valve Shim Tool, Steel, Honda 75-83

• For adjusting valve clearance on twin cam models
• Hold valve spring bucket down so adjusting shims can be removed
• Manufactured of hardened alloy steel

MOTION PRO Valve Shim Tool, Steel, Suzuki

• For adjusting valve clearance on twin cam models
• Hold valve spring bucket down so adjusting shims can be removed
• Manufactured of hardened alloy steel

TECMATE Vaccumate 6-Cylinder Adapter Kit, VacuuMate

• The extended vacuum adapter includes 11/2' of santoprene hose and is ideal for permanent mounting on sportbikes or any other vehicles where access to the carburetor or fuel-injection synchronizing ports requires removal of various side panels, air filters or the fuel tank
• The unique flexi-rigid adapter easily allows synchronization of machines with difficult-to-reach 5mm or 6mm carburetor or fuel-injection vacuum ports; simply bend the outer sheath to the appropriate angle/shape and then turn the inner tube to thread the brass fitting into the vacuum port
• Sold each

DENNIS STUBBLEFIELD SALES PULLER FLYWHEEL XP900 RZR, made in the usa

• Measurements are from male threads (outside edge)
• Consult the descriptions first to find a tool or puller
• Made in the U.S.A.

NOTE: Internal threads in the engine part take a male-threaded tool or puller; external threads on the engine part take a female-threaded tool or puller.

NOTE: Lubricate heavily before use.

LANG TOOLS Cylinder Leakage Tester, made in the usa, Each, size 14mm, Replacement, Air Leak-down Tester

• Tester with one 35 psi pressure gauge and one gauge with special multi-colored band for measuring low, moderate and high leakage as well a scale that ranges from -1%
• Precision regular
• 26" long hose assembly with standard M14 and M18 adapter end
• M14 long-reach adapter, M1 adapter and M12 adapter included

KIBBLEWHITE Valve Guide Ball Hone 5mm, made in the usa, Each, style 5.0mm

• Durable enough to size C630 bronze and cast iron valve guide materials
• Available from 4mm up to 3/8" widths
• Sold each
• Made in the U.S.A.

KIBBLEWHITE Valve Guide Ball Hone 4.5mm, made in the usa, Each

• Durable enough to size C630 bronze and cast iron valve guide materials
• Available from 4mm up to 3/8" widths
• Sold each
• Made in the U.S.A.

MOTION PRO Valve Seal Install Tool 5.0mm For Hayabusa

• Properly aligns valve stem seal to valve guide so seal snaps on straight every time
• Holds four valve guide seals at one time for quick and easy installation on multi-valve cylinders
• Contoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy outer rim
• Slim profile allows easy access to valve guides even on modern compact heads with deep lifter bores
• Rounded tip will not damage inner lip of valve stem seal or valve guide bore
• Anodized aluminum handles with stainless steel pilot shafts

MOTION PRO Valve Seal Install Tool 4.5mm

• Properly aligns valve stem seal to valve guide so seal snaps on straight every time
• Holds four valve guide seals at one time for quick and easy installation on multi-valve cylinders
• Contoured design in bottom of handle cradles and protects the delicate inner lip of the valve stem seal while directing tool force to the sturdy outer rim
• Slim profile allows easy access to valve guides even on modern compact heads with deep lifter bores
• Rounded tip will not damage inner lip of valve stem seal or valve guide bore
• Anodized aluminum handles with stainless steel pilot shafts

LANG TOOLS Small Engine Valve Spring Compressor, made in the usa

• Long and slender design with maximum opening of 2 3/8"
• Will reach into small recesses where valve springs and retaining washers are located
• Jaws are adjustable in width and have thin edges that can be forced under and over ends of valve spring to compress it for removal

TMV Valve Spring Compression Tool, Black, note 19/23/25mm

• Includes 19, 23 and 25mm diameter compression ends

PINGEL Threaded Cylinder Head Holder, made in the usa

• Mount in any bench vise in any position and hold cylinder head securely in place for all types of head work
• Made of steel and yellow zinc plated
• Shaft of the tool has a drilled hole for clean and easy wall storage
• Made in the U.S.A.

LANG TOOLS 12mm Spark Plug Rethreader, Black, made in the usa, Each

• Used to clean up dirty or damaged spark plug threads on Twin Cam, V-Rod and some Sportster models
• Consists of a special 12mm spark plug thread with a lead in (for proper alignment) and flutes (for dirt and chip relief)
• Also features a 5/8" hexagon with O-ring and female 3/8" square drive; requires the use of a 5/8" spark plug socket, or the female square requires the use of a male 3/8" square drive
• Special 12mm spark plug thread ensures proper engagement

LANG TOOLS Lower Rocker Box Wrench, Harley 94-00 FX 94-99 FL 94 - 94 XL

• Extra-long reversible ratcheting wrench is used to install/remove the lower rocker box
• A special 7/16" socket protrudes out of the wrench to reach the application
• Vinyl grip provides a comfortable, ergonomic grip and prevents the wrench from scratching or marring the bike

LANG TOOLS Lower Rocker Box Wrench, Harley 99-12 FX 99-12 FL

• Extra-long reversible ratcheting wrench is used to install/remove the lower rocker box
• A special 7/16" socket protrudes out of the wrench to reach the application
• Vinyl grip provides a comfortable, ergonomic grip and prevents the wrench from scratching or marring the bike

LANG TOOLS Replacement Bits For Rocker Box Cover Ratcheting Wrench, 3-Pack, size 3/16"

• To install and remove rocker box covers
• 93/4" long chrome-plated single-end reversible wrench has a 1/4" drive and 3/16" replaceable Allen bit end
• Low profile to allow clearance between frame and engine
• Comfortable, ergonomic vinyl grip
• Vinyl will not scratch chrome or paint
• Replacement bits also available
• Made in the U.S.A.

LANG TOOLS Cylinder Sleeve Hold-Down, Silver, Zinc-plated, made in the usa, 4-Pack, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL

• Specialty nuts are used to hold down cylinder sleeves during service
• Allow motor to be turned over with heads off
• Nuts fit 3/8"-16 UNC thread
• Feature 3/4" hexagon with a small cylinder protruding down to catch the cylinder stud
• Case-hardened and zinc-plated
• Sold in packs of four

LANG TOOLS Rocker Box Cover Bolt Ratcheting Wrench, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL

• To install and remove rocker box covers
• 93/4" long chrome-plated single-end reversible wrench has a 1/4" drive and 3/16" replaceable Allen bit end
• Low profile to allow clearance between frame and engine
• Comfortable, ergonomic vinyl grip
• Vinyl will not scratch chrome or paint
• Replacement bits also available
• Made in the U.S.A.

FEULING OIL PUMP CORP. Pushrod Tube Holder Tool, Black, made in the usa, Each

• Makes for easy adjustment of adjustable pushrods, holding pushrod tubes up and out of the way
• Sold each
• Made in the U.S.A.

MOTION PRO Tappet Screen Plug Tool, Black, Each

• Compact design
• O-ring on drive retains tool in 7/16" wrench or socket
• 7/16" drive allows more rotation without contacting motor
• Flange design allows downward force to be applied to tool