Multi-Fit and Custom Rear Fenders

V-Twin Manufacturing 12-3/4" wide Rear Motorcycle Fender Blank Raw Steel

$117.54

8-1/2" Wide Flat Rear Fender For Wide Tire Rigid Frames

$108.80

7-1/2" Wide Flat Rear Fender For Wide Tire Rigid Frames

$97.15

Flat Rear Fender 6"Wide Universal Custom Use...6" Wide Rolled 14 Gauge Steel

$84.95

V-Twin Manufacturing 280-300 Tire Strutless Rear Fender, 2mm Thick Steel, 1991-99 ST

$157.04

V-Twin Manufacturing 11" wide Rear Motorcycle Fender Smooth Pro Stretch

$117.54

V-Twin Manufacturing 10" Wide Rear Fender With Round Profile

$132.25

V-Twin Manufacturing Rear Fender Round Profile

$295.22

Fender,Rear Custom Fatbob Custom Use For Left Hand Drive 7" Wide,Raw Steel,38"Long

$115.15

V-Twin Manufacturing 9" Wide and Ribbed Motorcycle Fender with center bead

$157.04

V-Twin Manufacturing 8" Wide and Ribbed Motorcycle Fender Round Profile

V-Twin Manufacturing Rear Raw Fender

$214.19

Sold Out

$235.61

V-Twin Manufacturing Chrome Lower Fender Trim Skirt with Flame fits 1980-Up, 60179-06

$29.96

V-Twin Manufacturing Dresser Rear Fender Undrilled, 50-0942

$164.53

V-Twin Manufacturing Bobbed Rear Fender For Rigids, 36-57

$236.11

V-Twin Manufacturing 13.5"x38"x27.5" Wyatts Rear Fender,Steel,13.25"W x 38"L

$185.61

V-Twin Manufacturing 7.25" Left Cut F.Bob Rear Fender

$80.60

V-Twin Manufacturing 12-3/4" wide Rear Motorcycle Fender Blank Raw Steel

VT-50-2052

Regular price $117.54

In Stock

Save $-117.54

Shipping calculated at checkout.

Rear fender is constructed of steel and has a raw finish. Fender is smooth formed and not drilled for builders application.
Fender measures 12-3/4" wide x 38" long. May require fender spacing. We suggest pre fitting the fender before painting.
Rear fender is constructed of steel and has a raw finish. This steel motorcycle fender is smooth formed and not drilled for builders application. Fender measures 12-3/4" wide x 38" long. May require fender spa

Length: 38"

Width: 12-3/4"

End To End: 27-1/2"

Gauge Thickness: 2.250

Diameter: 12-7/8"

Outside Dimension: 12-7/8"

Inside Dimension: 12-5/8"

Overall Height: 11"

Top to End of Side: 3-1/4"

Name

Phone number How can we help?

8-1/2" Wide Flat Rear Fender For Wide Tire Rigid Frames

MID-22030

Regular price $108.80

In Stock

Save $-108.80

Shipping calculated at checkout.

Flat Rear Fender 8-1/2" Wide For Wide Tire Rigid Frame & Custom Use.......8-1/2" Wide

Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
They measure a full 48 in circumference and can be cut to your desired length
enders are not drilled or relieved for the chain or drive belt
See the frame and body section for fender supports

Kraft Tech
Raw Steel 8 ¹/₂ wide flat fender
Fits Big Twin & Sportster Rigid frames

Name

Phone number How can we help?

7-1/2" Wide Flat Rear Fender For Wide Tire Rigid Frames

MID-22029

Regular price $97.15

In Stock

Save $-97.15

Shipping calculated at checkout.

Flat Rear Fender 7-1/2" Wide For Wide Tire Rigid Frame & Custom Use - - 7-1/2" Wide

Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
They measure a full 48 in circumference and can be cut to your desired length
enders are not drilled or relieved for the chain or drive belt
See the frame and body section for fender supports

Kraft Tech
Raw Steel 7 ¹/₂ wide flat fender
Fits Big Twin & Sportster Rigid frames

Name

Phone number How can we help?

Flat Rear Fender 6"Wide Universal Custom Use...6" Wide Rolled 14 Gauge Steel

MID-22013

Regular price $84.95

In Stock

Save $-84.95

Shipping calculated at checkout.

Flat Rear Fender 6"Wide Universal Custom Use...6" Wide Rolled 14 Gauge Steel

Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
They measure a full 48 in circumference and can be cut to your desired length
enders are not drilled or relieved for the chain or drive belt
See the frame and body section for fender supports

Kraft Tech
Raw Steel 6 wide flat fender
Fits Big Twin & Sportster Rigid frames

Name

Phone number How can we help?

V-Twin Manufacturing 280-300 Tire Strutless Rear Fender, 2mm Thick Steel, 1991-99 ST

VT-50-0242

Regular price $157.04

In Stock

Save $-157.04

Shipping calculated at checkout.

Strutless rear fender is 2mm thick and has a width of 12.75" and constructed of steel. Fender will cover 280-300 series tire.
Let V-TWIN help you with that wide tire conversion. These strutless rear fenders will fit over the new tire and attach to the stock width frame. Fender will bolt to frames 11" wide where strut mounts. The width of the inside of the fender where it ataches to the frame measures 12-1/4". The stock strut supports must be removed from the frame. We suggest pre fitting the fender prior to painting. Position cut drill mount holes as required.

Strut Outer Width: 13-3/4"

Fender Inner Width: 12-1/2"

Fender Outer Width: 13-1/8"

Strut Inner Width: 13"

Strut Outer Width: 13-3/4"

Name

Phone number How can we help?

V-Twin Manufacturing 11" wide Rear Motorcycle Fender Smooth Pro Stretch

VT-50-2045

Regular price $117.54

In Stock

Save $-117.54

Shipping calculated at checkout.

V-Twin Manufacturing 11" wide Rear Motorcycle Fender Smooth Pro Stretch - Sold Each

Smooth rear Pro streched fender is constructed of 2mm thick steel and has a raw finish. Fender measures 11" wide.
We suggest pre fitting the fender prior to painting.

Custom application

Name

Phone number How can we help?

V-Twin Manufacturing 10" Wide Rear Fender With Round Profile

VT-50-1582

Regular price $132.25

In Stock

Save $-132.25

Shipping calculated at checkout.

V-Twin Manufacturing 10" Wide Rear Fender With Round Profile - Sold Each

Round profile chopper raw fender is 10" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.

Custom application

Name

Phone number How can we help?

V-Twin Manufacturing Rear Fender Round Profile

VT-50-1579

Regular price $295.22

In Stock

Save $-295.22

Shipping calculated at checkout.

V-Twin Manufacturing Rear Fender Round Profile - Sold Each
Round profile chopper raw fender is 6" wide and ribbed type with center bead. Note: All fenders are shipped raw. Fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Note: Preparation is required before priming and

Name

Phone number How can we help?

Fender,Rear Custom Fatbob Custom Use For Left Hand Drive 7" Wide,Raw Steel,38"Long

MID-22009

Regular price $115.15

In Stock

Save $-115.15

Shipping calculated at checkout.

Fender,Rear Custom Fatbob Custom Use For Left Hand Drive 7" Wide,Raw Steel,38"Long

This 7 wide rear fender measures 38 in total length and is stamped from 19 guage steel
The smooth (non-drilled) sides allow you to position the fender exactly where you want it

V-FACTOR
Raw Steel with left hand drive fitment
Fits Rigid or Swingarm frame
(Imported)

Name

Phone number How can we help?

V-Twin Manufacturing 9" Wide and Ribbed Motorcycle Fender with center bead

VT-50-1581

Regular price $157.04

In Stock

Save $-157.04

Shipping calculated at checkout.

V-Twin Manufacturing 9" Wide and Ribbed Motorcycle Fender with center bead - Sold Each

Round profile chopper raw fender is 9" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.

Custom application

Name

Phone number How can we help?

V-Twin Manufacturing 8" Wide and Ribbed Motorcycle Fender Round Profile

VT-50-1580

Regular price $214.19

In Stock

Save $-214.19

Shipping calculated at checkout.

V-Twin Manufacturing 8" Wide and Ribbed Motorcycle Fender Round Profile - Sold Each

Round profile chopper raw fender is 8" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.

Custom application

Name

Phone number How can we help?

V-Twin Manufacturing Chrome Lower Fender Trim Skirt with Flame fits 1980-Up, 60179-06

VT-50-1132

Regular price $29.96

In Stock

Save $-29.96

Shipping calculated at checkout.

V-Twin Manufacturing Chrome Lower Fender Trim Skirt with Flame fits 1980-Up, 60179-06 - Sold Each
Chrome Lower Fender Trim Skirt with Flame OEM No: 60179-06 Chrome lower fender trim skirt with flame design includes screws. Fits: FLT 1980-UP FLST 1986-UP UOM: 1 - EA Country of Origin: Imported

Name

Phone number How can we help?

V-Twin Manufacturing Dresser Rear Fender Undrilled, 50-0942

VT-50-0942

Regular price $164.53

In Stock

Save $-164.53

Shipping calculated at checkout.

V-Twin Manufacturing Dresser Rear Fender Undrilled, 50-0942 - Sold Each

Smooth full type dresser rear fender uses either stock or smooth struts and is constructed of steel.
Measures 6-1/2" wide. For use on 1982-up FXR and 1982-up XL models. We suggest pre fitting the fender prior to painting.

Custom application

Name

Phone number How can we help?

V-Twin Manufacturing Bobbed Rear Fender For Rigids, 36-57

VT-50-0880

Regular price $236.11

In Stock

Save $-236.11

Shipping calculated at checkout.

V-Twin Manufacturing Bobbed Rear Fender For Rigids, 36-57 - Sold Each

Bobbed rear fender for rigid models includes brackets and is 7-3/8" wide.
The inside width of the fender braces measure 8-1/4". We suggest pre fitting the fender prior to painting.

EL 1936-1952
FL 1941-1957
UL 1937-1948

Name

Phone number How can we help?

V-Twin Manufacturing 13.5"x38"x27.5" Wyatts Rear Fender,Steel,13.25"W x 38"L Harley V-Twin Manufacturing - K and G Cycles

V-Twin Manufacturing 13.5"x38"x27.5" Wyatts Rear Fender,Steel,13.25"W x 38"L

VT-50-0244

Regular price $185.61

In Stock

Save $-185.61

Shipping calculated at checkout.

V-Twin Manufacturing 13.5"x38"x27.5" Wyatts Rear Fender,Steel,13.25"W x 38"L - Sold Each

Fender is constructed of steel and is 13-1/2" wide x 38" long. It is smooth formed and not drilled for builders application.
We suggest pre fitting the fender prior to painting.

Custom application for 330 Tire

Measurements:

Width: 1

Name

Phone number How can we help?