Multi-Fit Motorcycle Lowering Kits

• Makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with its lower center of gravity
• Lowers your bike 1" leaving adequate room for stock tire-to-fender clearance; designed to retain the use of the stock rubber shock boot
• CNC-machined with a black finish
• Easy to install in approximately 30 minutes with common tools, and includes instructions and hardware
• Made in the U.S.A.

• Reduces rear ride height by moving the lower shock mount further back
• More economical than buying shorter shocks
• Includes instructions & hardware
• See the front end section for front lowering kits

• These kits are designed to be used with OEM rear shocks to lower a Softail model motorcycle as much at 2 depending on the kit used
• After the shocks are removed from the bike, installing the kit can be done by using a shop press or you can use 20107 shock spring compressor
• Installation instructions are included with all kits except V-FACTOR

• These kits are designed to be used with OEM rear shocks to lower a Softail model motorcycle as much at 2 depending on the kit used
• After the shocks are removed from the bike, installing the kit can be done by using a shop press or you can use 20107 shock spring compressor
• Installation instructions are included with all kits except V-FACTOR

• Lowers your L 1 leaving adequate room for stock tire to fender clearance and is designed to retain the use of the stock rubber shock boot
• Makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with Fits lower center of gravity
• CNC machined from billet aluminum with a black finish
• Designed to be used with OE shocks
• Saddlebag modifications are necessary for installation on FLHRC models
• Installs in about 30 minutes with common tools and includes instructions & hardware

• These kits are designed to be used with OEM rear shocks to lower a Softail model motorcycle as much at 2 depending on the kit used
• After the shocks are removed from the bike, installing the kit can be done by using a shop press or you can use 20107 shock spring compressor
• Installation instructions are included with all kits except V-FACTOR

• Reduces the rear ride height by repositioning the lower shock mount further back
• More economical than buying shorter rear shocks
• Easy to install
• Includes installation instructions and all required hardware
• See the front end section for front fork lowering kits

Full lowering kit includes components to lower the front and rear of a Softail model.
Full lowering kit includes shorter damper rods, 1" shorter kickstand and adjustable rear shock lowering set. The front of the FXST is lowered 2-1/2" and 2" on FLST

Chrome rear lowering kit lowers rear frame area 1".
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over

Chrome rear lowering kit lowers rear frame area 1".
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over

Kit lowers rear frame are 1-1/2". Includes instructions, hardware and black brackets.
Warning: Installing a lower kit or shorter shocks will decrease intial ground clearance. The motorcycle will be lower to the ground and care should be taken to avo

Black rear shock lowering kit includes instructions, hardware and black brackets.
Kit lowers rear frame area 1". Warning: Installing a lowering kit or shorter shocks will decrease intial ground clearance. The motorcycle will be lower to the ground a

Black rear lowering kit lowers rear frame area 1".
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over b

Lowering kit for Softail is fully adjustable shock link for Softails. Left hand threaded design allows adjustments in sm all increments from stock to the drop of your choice. Allows 1-1/2" lowering.

Kit lowers rear frame area 1". Includes instructions, hardware and black brackets.
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to av

Kit lowers rear frame area 1-1/2". Includes instructions, hardware and black brackets.

Black kit lowers rear frame area 1". Includes instructions, hardware and black brackets.

Progressive suspension fork spring lowering kit comes with Progressive rate fork springs and spacers.
Kit can be installed at two different levels to lower fork 1" or 2". This is a drop in lowering kit but requires the use of 2001 and earlier fork d

Progressive fork springs feature high quality and high performance.
Springs eliminate front end sag, reduce nose dive uinder braking, improve cornering stability, increase ride comfort and allow forks to utilize full travel.