Name: Oil Filter Adapter Kit Custom Applications Black, Includes Filter
Brand: Mid-USA
SKU: MID-87123
Price: 42.65 USD
Availability: InStock

Mid-USA

Oil Filter Adapter Kit Custom Applications Black, Includes Filter

MID-87123

$42.65

In Stock

Shipping calculated at checkout.

Oil Filter Adapter Kit Custom Applications Black, Includes Filter

Stop looking around, this Universal Oil ilter Adapter makes oil filter installation a snap
Versatile adapter will work with Big Twin with exhaust pipes around the inside or outside of the frame as well as on Sportster models
Standard clamp type fittings are included on the oil filter bracket
or installation approximately 5 feet of ³/₈ oil line, screwdriver, ¹/₂ wrench and a sharp knife are needed
If no oil cooler is used, Sportster installation requires approximately 6 feet of ³/₈ oil line
Includes oil filter

HARDBODY
Black Adapter Kit
Fits Big Twin & Sportster (except Twin Cam), all years

Mid-USA

Oil Filter Paper Element Blk Dyna 91/98 BT Evo 92/L Spt L84 /L* Rpls Hd 63812-90

MID-87122

$11.97

In Stock

Shipping calculated at checkout.

Oil Filter Paper Element Blk Dyna 91/98 Bt Evo 92/L Spt L84 /L* Rpls Hd 63812-90

See below for availability of element type
Check dimensions before ordering

Emgo
Black oil filter with OE paper element
5 1/2 long, 3/4-16 thread
Fits Dyna 1991/1998, Big Twin Evolution 1992/Later, Sportster Late 1984/Later
Replaces HD# 63812-90

Mid-USA

Oil Filter Paper Element Cp Dyna 91/98 BT Evo 92/L Spt L84 /L* Rpls Hd 63813-90

MID-87121

$18.26

In Stock

Shipping calculated at checkout.

Oil Filter Paper Element Cp Dyna 91/98 Bt Evo 92/L Spt L84 /L* Rpls Hd 63813-90

See below for availability of element type
Check dimensions before ordering

Emgo
Chrome Plated oil filter with OE paper element
5 1/2 long, 3/4-16 thread
Fits Dyna 1991/1998, Big Twin Evolution 1992/Later, Sportster Late 1984/Later
Replaces HD# 63815-90

Mid-USA

High Performance Oil Filter Bl BT 4 Spd L82/86(Ex St) Spt 80/ E84 Rpls Hd 63810-80 Hd-3

MID-87117

$13.19

In Stock

Shipping calculated at checkout.

High Performance Oil Filter Bl Bt 4 Spd L82/86(Ex St) Spt 80/ E84 Rpls Hd 63810-80 Hd-3

Leading edge technology with the use of microglass/synthetic enhanced filtration media
S.A.E. technical papers report the greatly increased efficiency of glass enhanced filter media for particle retention capabilities in the 4 to 22 micron range, the particle size most effective in greatly reducing engine wear. Glass enhanced media also provides the added benefit of higher levels of dirt holding capacity without increased flow restriction (back pressure). This new technology filter media is considerably more costly than standard cellulose media; however, the enhanced filtration qualities that directly translate into longer engine life justify the cost
Correct pressure relief valving and flow rates in accordance with the original manufacturer's specifications
Available as an original equipment style direct replacement high performance spin-on filter or as a high capacity/high performance filter as listed

Perf-form Products
Black OE style High Performance ilter
2 1/2 long, 5/8-18 (16 x 1.5mm) thread
Fits Big Twin 4 speed Late 1982/1986 (except Softail), Sportster 1980/Early 1984
Replaces HD# 63810-80

Mid-USA

Oil Filter Paper Element Blk BT 5Spd 80/98(Ex Dyna)St 84/99 Spt L84/L* Rpls Hd 63805-80T

MID-87114

$9.75

In Stock

Shipping calculated at checkout.

Oil Filter Paper Element Blk Bt 5Spd 80/98(Ex Dyna)St 84/99 Spt L84/L* Rpls Hd 63805-80T

See below for availability of element type
Check dimensions before ordering

Emgo
Black with OE paper element
3 1/2 long, 3/4-16 thread
Fits all Big Twin 5 speed 1980/1998 (Except Dyna), Softail 1984/1999, Sportster Late 1984/Later
Replaces HD# 63805-80T

Mid-USA

Oil Filter Paper Element Blk BT 4 Spd L82/86(Ex St)Spt 1980 /Early 84 Rpls Hd 63810-80T

MID-87113

$9.36

In Stock

Shipping calculated at checkout.

Oil Filter Paper Element Blk Bt 4 Spd L82/86(Ex St)Spt 1980 /Early 84 Rpls Hd 63810-80T

See below for availability of element type
Check dimensions before ordering

Emgo
Black oil filter with OE paper element
2 1/2 long, 5/8-18 thread (16mm X 1.5mm)
Fits Big Twin 4 speed Late 1982/1986 (Except Softail), Sportster 1980/Early 1984
Replaces HD# 63810-80T

Mid-USA

In Tank Oil Filter Element BT 53/E82,Spt 54/78 W/Relief Valve Perf-Form Hd-1

MID-87111

$16.80

In Stock

Shipping calculated at checkout.

In Tank Oil Filter Element Bt 53/E82,Spt 54/78 W/Relief Valve Perf-Form Hd-1

Paper filter element with seals and spring
ilters have a special built-in relief valve system and provide up to 40% more effective filtration than the original filter
Easy to replace substitute for the drop-in tank fiber filter

Perf-form Products
Fits Big Twin 1953/Early 1982 & K Model and Sportster 1954/1978
Replaces HD# 63839-53

Mid-USA

Oil Filter Element,In Tank BT 53/E 82,Kh Spt 54/78 With Relief Valve Perf-Form 0F-0012

MID-87110

$8.80

In Stock

Shipping calculated at checkout.

Oil Filter Element,In Tank Bt 53/E 82,Kh Spt 54/78 With Relief Valve Perf-Form 0F-0012

Paper filter element with seals and spring
ilters have a special built-in relief valve system and provide up to 40% more effective filtration than the original filter
Easy to replace substitute for the drop-in tank fiber filter

V-FACTOR
Fits Big Twin 1953/Early 1982 & K Model and Sportster 1954/1978
Replaces HD# 63839-53

Mid-USA

Oil Filter Element,In Tank Big Twin 53/E82,Kh Spt 54/78 Paper Type Rpls Hd 63839-53

MID-87107

$5.55

In Stock

Shipping calculated at checkout.

Oil Filter Element,In Tank Big Twin 53/E82,Kh Spt 54/78 Paper Type Rpls Hd 63839-53
V-FACTOR
Paper filter element with rubber washers
Fits Big Twin 1953/Early 1982 and KH, Sportster 1954/1978
Replaces HD# 63839-53
(Imported)

Mid-USA

Oil Filter Paper Element Cp BT 5Spd 80/98(Ex Dyna)St 84/99 Spt L84/L* Rpls Hd 63796-77T

MID-87104

$13.29

In Stock

Shipping calculated at checkout.

Oil Filter Paper Element Cp Bt 5Spd 80/98(Ex Dyna)St 84/99 Spt L84/L* Rpls Hd 63796-77T

See below for availability of element type
Check dimensions before ordering

Emgo
Chrome Plated oil filter with OE paper element
3 1/2 long, 3/4-16 thread
Fits Big Twin 5 speed 1980/1998 (except Dyna), Softail 1984/1999, Sportster Late 1984/Later
Replacement filter for 87001, 87002 & 87006
Replaces HD# 63796-77T

Mid-USA

Oil Filter Paper Element Cp BT 4 Spd L82/86(Ex St)Spt 1980 /Early 84 Rpls Hd 63782-80T

MID-87103

$13.29

In Stock

Shipping calculated at checkout.

Oil Filter Paper Element Cp Bt 4 Spd L82/86(Ex St)Spt 1980 /Early 84 Rpls Hd 63782-80T

See below for availability of element type
Check dimensions before ordering

Emgo
Chrome Plated oil filter with OE paper element
2 1/2 long, 5/8-18 thread (16mm X 1.5mm)
Fits Big Twin 4 speed Late 1982/1986 (except Softail), Sportster 1980/Early 1984
Replacement filter for Early style 87001
Replaces HD# 63782-80T

Mid-USA

Oil Filter Kit,Conversion Sportster 1957/1981(Ex 1979) With Hardware

MID-87001

$52.00

In Stock

Shipping calculated at checkout.

Oil Filter Kit,Conversion Sportster 1957/1981(Ex 1979) With Hardware
Oil filtering system is complete with mounting plate, filter, hoses, clamps and hardware. Uses late model spin on filters.V-FACTOR
Chrome Plated Kit
Fits Sportster models 1957/1981 (except 1979 with OE style crossover exhaust)
(Imported)

Mid-USA

Round Oil Tank With Domed Ends Hardbody St,Rigid & Custom Frames Ctr Fill W/BTy Box Cp

MID-86082

$413.40

In Stock

Shipping calculated at checkout.

Round Oil Tank With Domed Ends Hardbody St,Rigid & Custom Frames Ctr Fill W/Bty Box Cp

These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
3.5 quart with battery tray
Lower left hand relief for use with a chain or belt rear drive
The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
Tank body measures 6 ¹/₂ O.D.
Made from 16 gauge steel to resist cracking
100% TIG welded for maximum strength
Includes heavy duty front mount and fill plug
Use with Softail size battery and OE style rear tank mount
Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Chrome Plated Domed Side with Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Mid-USA

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Side Fill With Battery Box

MID-86081

$357.60

In Stock

Shipping calculated at checkout.

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Side Fill With Battery Box

These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
3.5 quart with battery tray
Lower left hand relief for use with a chain or belt rear drive
The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
Tank body measures 6 ¹/₂ O.D.
Made from 16 gauge steel to resist cracking
100% TIG welded for maximum strength
Includes heavy duty front mount and fill plug
Use with Softail size battery and OE style rear tank mount
Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Raw Steel lat Side, Side ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Mid-USA

Oil Tank Custom Round 3.5 Qts Hardbody St,Rigid & Custom Frames Side Fill W/BTy Box Cp

MID-86075

$368.65

In Stock

Shipping calculated at checkout.

Oil Tank Custom Round 3.5 Qts Hardbody St,Rigid & Custom Frames Side Fill W/Bty Box Cp

These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
3.5 quart with battery tray
Lower left hand relief for use with a chain or belt rear drive
The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
Tank body measures 6 ¹/₂ O.D.
Made from 16 gauge steel to resist cracking
100% TIG welded for maximum strength
Includes heavy duty front mount and fill plug
Use with Softail size battery and OE style rear tank mount
Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Chrome Plated lat Side, Side ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Mid-USA

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Center Fill With Battery Box

MID-86080

$324.20

In Stock

Shipping calculated at checkout.

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Center Fill With Battery Box

These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
3.5 quart with battery tray
Lower left hand relief for use with a chain or belt rear drive
The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
Tank body measures 6 ¹/₂ O.D.
Made from 16 gauge steel to resist cracking
100% TIG welded for maximum strength
Includes heavy duty front mount and fill plug
Use with Softail size battery and OE style rear tank mount
Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Raw Steel lat Side Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Mid-USA

Oe Style Oil Tank,Raw Steel Softail 86/99 Side Fill Rpls Hd 62498-89A

MID-86008

$146.30

In Stock

Shipping calculated at checkout.

Oe Style Oil Tank,Raw Steel Softail 86/99 Side Fill Rpls Hd 62498-89A

3 quart steel tank
aithful copy of the OE oil tank found on all Softail models
Includes fill plug
See the electric section for battery cusion and strap

V-FACTOR
Raw Steel Oil Tank
Fits Softail models 1986/1999
Replaces HD# 62498-89A
(Imported)

Mid-USA

Oil Tank,Stock Style Spt 1983/1993 Chrome Plated Replaces Hd# 62475-83

MID-86047

$139.25

In Stock

Shipping calculated at checkout.

Oil Tank,Stock Style Spt 1983/1993 Chrome Plated Replaces Hd# 62475-83

High quality reproduction of the OE oil tank
Includes chrome plated fill plug

Note: Due to the inherent oxidation associated with the chrome plating process, this oil tank must be thoroughly cleaned out with kerosene or tank cleaner before putting to useV-FACTOR
Chrome Plated Oil Tank
Fits Sportster models 1983/1993
Replaces HD# 62475-83
(Imported)

Mid-USA

Oil Tank,Oe Style Square Cp BT 4Spd 1965/E1982 Rpls 62610-52Ta 62483-81

MID-86016

$133.65

In Stock

Shipping calculated at checkout.

Oil Tank,Oe Style Square Cp Bt 4Spd 1965/E1982 Rpls 62610-52Ta 62483-81

4 quart capacity
Can be used with the OE metal canister-type oil filter holder but for easy maintenance, use our drop-in oil filter 87110
Oil filter cap 85009 must be ordered separately

Note: Due to inherent oxidation during storage of oil tanks as well as oxidation associated with the chrome plating process, all oil tanks purchased require thorough cleaning with a rust removing chemical liquid prior to use.V-FACTOR
Chrome Plated Oil Tank without cap
Fits Big Twin 4 speed 1965/Early 1982
Replaces HD# 62610-52TA & 62483-81

Mid-USA

Oe Style Oil Tank,Black BT 4 Speed 65/E82 Rpls 62610-52Ta & 62483-81

MID-86009

$137.50

In Stock

Shipping calculated at checkout.

Oe Style Oil Tank,Black Bt 4 Speed 65/E82 Rpls 62610-52Ta & 62483-81

4 quart capacity
Can be used with the OE metal canister-type oil filter holder but for easy maintenance, use our drop-in oil filter 87110
Oil filter cap 85009 must be ordered separately

Note: Due to inherent oxidation during storage of oil tanks as well as oxidation associated with the chrome plating process, all oil tanks purchased require thorough cleaning with a rust removing chemical liquid prior to use.V-FACTOR
Black Oil Tank without cap
Fits Big Twin 4 speed 1965/Early 1982
Replaces HD# 62610-52TA & 62483-81

Mid-USA

Oil Tank, Oe Style Softail 00/Later Rpls. Hd 62498-00A

MID-86000

$175.95

In Stock

Shipping calculated at checkout.

Oil Tank, Oe Style Softail 00/Later Rpls. Hd 62498-00A
V-FACTOR
Chrome Plated Oil Tank
Fits Softail models 2000/Later (except XCW & XCWL)
Replaces HD# 62498-00A
(Imported)

Mid-USA

Oil Guage Mt Kit T/C With Fitting Rpls Hd# 75133-99

MID-85213

$71.40

In Stock

Shipping calculated at checkout.

Oil Guage Mt Kit T/C With Fitting Rpls Hd# 75133-99

Kit will not work with billet rocker box covers
Comes complete with oil filled gauge and all necessary mounting hardware
Chrome plated mounting bracket
Retains dash light switch
Mount bracket holes measure 3 center to center

V-FACTOR
Oil Pressure Gauge Kit
Fits XD 1998/2005, XST Softail 2000/Later and FLHT & Road King 1999/Later
Replaces HD# 75133-99

Mid-USA

Oil Pressure Gauge Fitting BT Evo 84/L Use W/O Sending Unit Anodized Silver .2038

MID-85207

$37.15

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Fitting Bt Evo 84/L Use W/O Sending Unit Anodized Silver .2038

Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
Available to be used with or without the oil pressure sending unit as listed below
These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
Oil pressure gauge and sending unit not included
Oil pressure sending unit found in the engine section

HARDWARE
Anodized Silver Oil Pressure Gauge itting without sending unit
Fits Big Twin Evolution, all years

Mid-USA

Oil Pressure Gauge Fitting BT Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036

MID-85206

$37.15

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Fitting Bt Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036

Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
Available to be used with or without the oil pressure sending unit as listed below
These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
Oil pressure gauge and sending unit not included
Oil pressure sending unit found in the engine section

HARDWARE
Anodized Silver Oil Pressure Gauge itting for use with sending unit
Fits Big Twin Evolution, all years

Mid-USA

Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013

MID-85204

$8.45

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013

Complete Adapter kits available without oil pressure gauge
or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Oil Pressure Gauge Adapter
Fits Big Twin 1970/1999 (except Twin Cam)

Mid-USA

Oil Pressure Gauge Fitting,Kit Fits Big Twin Case 1936/1969 Chrome Plated Mfg #2014/2015

MID-85203

$13.95

In Stock

Shipping calculated at checkout.

Oil Pressure Gauge Fitting,Kit Fits Big Twin Case 1936/1969 Chrome Plated Mfg #2014/2015

Complete Adapter kits available without oil pressure gauge
or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Adapter
Fits Big Twin 1936/1969

Mid-USA

Oil Line Fitting, 90 Degree 5/16 Allen For Use In Close Quarters

MID-85158

$4.20

In Stock

Shipping calculated at checkout.

Oil Line Fitting, 90 Degree 5/16 Allen For Use In Close Quarters

Close quarters 90° oil line fitting for hard to reach areas
⁵/₁₆ allen, ¹/₈-27 NPT

V-FACTOR
Chrome Plated itting
Fits all models
(Imported)

Mid-USA

Oil Filler Spout Chrome Plated Flht FLHR FLTR 1993/2006 Inc Gasket & Cp Mnt Hrdw

MID-85156

$53.40

In Stock

Shipping calculated at checkout.

Oil Filler Spout Chrome Plated Flht Flhr Fltr 1993/2006 Inc Gasket & Cp Mnt Hrdw
V-FACTOR
Chrome Plated Spout with Gasket & Chrome Plated Mounting Hardware
Fits FLHT, FLHR & FLTR 1993/2006
Replaces HD# 62420-02
(Imported)

Mid-USA

Front Oil Tank Mtg Bracket, Cp St 84/99, Uw Hardbody Round Oil Tank,Includes Hardware

MID-85152

$14.40

In Stock

Shipping calculated at checkout.

Front Oil Tank Mtg Bracket, Cp St 84/99, Uw Hardbody Round Oil Tank,Includes Hardware

Mounts to the downpost for a simple way to attach the front of the oil tank
¹/₄ thick steel for maximum strength

V-FACTOR
Chrome Plated Mounting Bracket
Fits Softail 1984/1999 with battery tray type round oil tank

Mid-USA

Oil Tank Mount,Front Bracket Softail 1984/1999 & Custom Use Chrome Plated Rpls Hd 62707-84

MID-85151

$15.40

In Stock

Shipping calculated at checkout.

Oil Tank Mount,Front Bracket Softail 1984/1999 & Custom Use Chrome Plated Rpls Hd 62707-84

Heavy Duty
A full oil tank can weigh up to 29 pounds, ¹/₄ thick steel construction ensures these brackets will provide the necessary support
Threaded to eliminate the OEM welded-on nuts
Rear bracket is TIG welded

V-FACTOR
Chrome Plated ront Bracket
Fits Softail 1984/1999
Replaces HD# 62707-84
(Imported)

New products

Brand

Collection

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Brand

Collection

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Join the K and G Cycles family of friends