New products

Belt Drive Belt Guide Plate Front Inside Of Pulley 8 & 11 Mm Belt Drives Anodized Steel
Stamped steel and anodized. It contours to the front pulleys and helps guide the belt as well as protecting the alternator from belt rub. Used on all of our 1 1/2 8mm and 11mm front pulleys except early tapered shaft.Guide fits inside of pulley.

Main shaft bearing C-Clip Fits All BDL Motor plates, Mfg.CC-193

Belt Drives Ltd.
Replacement Main shaft Support Bearing C-Clip
Fits Softail 1990/2006

Engine Pulley Nut Lock Kit Fits Bdl Open Drives W/2 Piece Engine Pulley Mfg#Mplp-100

• Designed to keep the crankshaft nut from backing off on BDL open belt drives
• Lockplate is manufactured from laser cut ³/₁₆ stainless steel
• Includes ⁵/₁₆-18 x 2 grade 8 allen bolts and ⁵/₁₆ I.D. 6061 aluminum spacers for use with offset inserts
• The spacers are not necessary on offset inserts less than ³/₄
• Includes detailed instructions

Kirk's Customs
Stainless Steel Kit
Fits BDL open belt drives with 2 piece engine pulleys

Pulley Spacer .937" Tk W/Bolts Bt 73/99 Spt 79/99 Machined Billet Aluminum
Now you can install a 180 series tire on a 5 1/2 wide wheel on your standard width frame. Order the pulley style and size of your choice then order the belt to match your model and rear pulley combination. Next order the custom 15/16 wide rear pulley spacer and bolt kit if using a stock width belt drive hub. Wider rear fender must be used and the section of frame behind the shock must be widened on FXR and DYNA models.These 1 wide polished pulleys are made in a permanent mold from 356-T6 aircraft quality aluminum and feature gear cut teeth to RMA standards for an excellent belt wrap. Includes a chrome plated inner flange that is staked on.
Note: 1 wide pulley belts are designed for custom show only. They are not intended to be used in lieu of an 1 1/2 wide pulley and belt. Use of a 1 wide pulley and belt is at the users discretion and no warranty claims are made or implied by Belt Drives Ltd. or MID-USA.This machined aluminum Rear Pulley Spacer is .937 thick, includes chrome plated Countersunk mounting bolts and is designed to be used on models with 1986/1999 belt drive rear hubs and 1 wide rear pulleys.Note: 1 wide pulley belts are designed for custom show only. They are not intended to be used in lieu of an 1 1/2 wide pulley and belt. Use of a 1 wide pulley and belt is at the users discretion and no warranty claims are made or implied by Belt Drives Ltd. or MID-USA. These 1 wide polished pulleys are made in a permanent mold for 356 T6 Aircraft quality aluminum and feature gear cut teeth to RMA standards for an excellent belt wrap. Includes a chrome plated inner flange that is staked on.

Pulley,Trn Hard Anodized 29T Bt 5 Spd 85/05,7075 Alum W/Nut Lockplate,Seal,Spacer Tp-29
Note: These pulleys retro fit the 1985/Early 1994 pulleys that only had a ⁷/₁₆ wide spline and were notorious for working loose.

• Lighter that stock pulley
• Made in a permanent mold with 356 T6 aircraft quality aluminum
• Hard anodized teeth for longer pulley and belt life
• Made with a ³/₄ wide spline and correct length spacerBelt Drives Ltd
  29 tooth aluminum pulley
  Fits Big Twin 1985/2005

Note: These pulleys retro fit the 1985/Early 1994 pulleys that only had a ⁷/₁₆ wide spline and were notorious for working loose.

• Lighter that stock pulley
• Made in a permanent mold with 356 T6 aircraft quality aluminum
• Hard anodized teeth for longer pulley and belt life
• Made with a ³/₄ wide spline and correct length spacer Belt Drives Ltd
  32 tooth aluminum pulley
  Fits Big Twin 1985/2005
  Replaces HD# 40250-94

Mshf Housing Bearing,Pri Cvr Fl Fx 4 Spd 65/L St E 84 Rpls Hd 9040 Or 9037 Or 9061
V-FACTOR
Sealed Housing Bearing
Fits L, X 1965/Later, Softail Early 1984
Replaces HD# 9040, 9037, 9061
(Imported)

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1-1/2"Offset,Mtg Hrdw In-1500
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Steel Replacement 1 1/2 offset insert and mounting hardware.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1-1/4"Offset,Mtg Hrdw In-1250
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Steel replacement 1 1/4 offset insert and mounting hardware.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1"Offset & Mtg Hrdw In-1000
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1 offset insert and mounting hardware. Steel.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1-3/4"Offset,Mtg Hrdw .In-1750
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Replacement part. 1 3/4 offset insert and mounting hardware.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 3/4"Offset & Mtg Hrdw In-750
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.3/4 offset insert and mounting hardware. Steel.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1/2"Offset & Mtg Hrdw In-500
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1/2 offset insert and mounting hardware. Steel.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1/4"Offset & Mtg Hrdw In-250
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Replacement part. 1/4 offset insert and mounting hardware.

Belt Drive Part,Fr Pulley 8Mm 3" Wide Special Offset For St Use W/Offset Insert&Nut 47-Ofp
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Replacement part. 3 wide 47 tooth front pulley only, without splined insert. or Softail kits. Fits 77032 & 77025.

Belt Drive Part,Pulley Covers Fits Bdl 3" Open Drives Ex Sh Pol Alum W/Hardware Md-100

• Baby moon style.
• Polished aluminum.
• Offers better protection and reduces clutch noise.
• Includes special tape for permanent installation and button head bolts if you choose to drill and tap hub for easy on and off access.

NOTE: Does not include center plate pictured.

Polished aluminum pulley covers, includes double stick tape and screws for mounting. Fits 5 speed 3 open drives (Softail 1986/Later, FLT 1990/Later and FXR 1990/1994).

Belt Drive Part,Fr Pulley 8Mm 3"Wide Bt W/Tapered Eng Shaft Open Primary Belt Drive..47T-3

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.Belt Drives Ltd.
3 Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1954 with tapered sprocket engine shaft fits kit 77010

Belt Dr Part,Fr Pulley 3" 8Mm Bt 55/84 Use W/77022,#77024 & #77011 Open Pri Belt Dr..47-S3

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.Belt Drives Ltd.
3 Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1955/1984 with splined engine sprocket shaft fits 77011, 77022 & 77024

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.
Belt Drives Ltd.
2" Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1955/1984 with splined engine sprocket shaft fits 77009

Belt Guard,Lower Chrome Plated Softail 86/99 W/70T Rr Pulley Rpls Hd 60362-86A & 60366-89A
V-FACTOR
Chrome Plated Lower Guard
Fits Softail 1985/1999 with 70 tooth pulley
Replaces HD# 60362-86A & 60366-89A
(Imported)

Belt Guard,Lower Chrome Plated Fxr Flt Flht Flhs 1985/Later Replaces Hd 60397-85A
Made of chrome plated steel and designed for easy bolt-on installation. Duplicate of OEM parts.Lower Belt Guard fits all FXR and FLT, FLHT, FLHS 1985/Later. (Imported)

LUC-100

• Centrifugal force allows the actuator arms to move outward, which applies extra pressure against the pressure plate and clutch springs for positive engagement with no clutch slippage.
• Gives you the advantage of using the lighter pull 6 clutch spring set with no clutch slippage at hard throttles.
• Works well on any size engine.
• Manufactured from hard anodized CNC machined billet aluminum.
• Includes instructions.

Lock up clutch kit for BDL clutches. Fits BDL 8mm belt drives with dome style BDL pressure plate.
Note: This kit will not work with early BDL stepped dome pressure plate or open belt drive systems with dome pulley cover.

Belt Guard,Upper Chrome Plated Big Twin 4 Spd 1980/L (Ex St) Rpls Hd60380-79 & Hd60388-82
Made of chrome plated steel and designed for easy bolt-on installation. Duplicate of OEM parts.Upper Belt Guard fits all Big Twin 4 speed models 1980/Later. (Imported)

Belt Drive Idler Bearing Kit Bt 4 Spd 65/L...Fits To Inner Primary To Adjust Belt Tension
This high quality Primary Belt Drive Idler Bearing Kit is used to adjust the belt tension. Small adjustable serrated plate attaches to the large solid mounted stock plate within the cast inner primary. The rollers bearings are permanently sealed for zero maintenance. Fits Big Twin 4 speed 1965/Later with 1 1/2 primary belt drive.Note: Not intended for use with polychain belts that have ribs on the outside.

Pulley/Sprocket Spc,.375" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-FACTOR
• Polished
• CNC machined from billet aluminum with a polished circumference
• (Imported)

.375 Thick, for use w/Timken-type Bearings

Pulley/Sprocket Spc,.312" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-FACTOR
• Polished
• CNC machined from billet aluminum with a polished circumference
• (Imported)

.312 Thick, for use w/Timken-type Bearings

Pulley/Sprocket Spc,.500" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-FACTOR
• Polished
• CNC machined from billet aluminum with a polished circumference
• (Imported)

.500 Thick, for use w/Timken-type Bearings

Pulley/Sprocket Spc,.200" Pol Fits Timken Brg Rr Wheel Hub Uw Bt 73/99 Sprocket Or Pulley

• V-actor
• Offers expanded gearing options and increases tire to chain clearance by .200 over your stock sprocket allowing the use of a 150/160 series tire
• To properly align chain these sprockets must be used with 75439 rear wheel sprocket spacer
• When mounting to 1995/2005 models, use with our 74719 seal (HD# 12050) and our 72353 spacer (HD# 3334-85)
• See Drive Train Section for rear drive train and rear sprocket
• (Imported)

V-FACTOR Rear Wheel Sprocket Spacer
.200 Thick, Chrome Steel
Fits 5 Speed Sportster Late 1984/1999
or use w/Timken-type Bearings (Imported)

Belt Drive Part,Eng Pulley Nut Bt 4&5 Spd 55/06 W/Solid Mount Sprocket Rpls 24003-55 7816-1
Some folks like to show and some just want to go! Either way, we have you covered. or best results, always install the correct washer, especially on front pulleys that have a removable steel center.Colony
Chrome Plated (Grade 5) acorn style
Fits all primary belt drive kits on Big Twin 1955/2006 with spline shaft (except Dyna 2006/Later)
Replaces HD# 24003-55

Belt Drive Primary Kit,1-1/2" Fits Softail And Dyna 2007/L* Inc Lock Up Clutch Evb-8Sl

• Enclosed 1 1/2 belt drive with ball bearing lock up clutch kit for stock to extreme horsepower motors
• 36-69 tooth combo provides 1.33:1 drive ratio

Belt Drives Ltd.
Polished Kit
Fits Softail 2007/2008

Belt Dr Kit Primary 14Mm Pol St 90/06,3-3/8" Open W/Clutch Billet W/Brg Support Tf-2000
The 14mm by 3 3/8 belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate. Kit is the complete drive with outboard bearing supports. The outboard bearing support has one bearing to support the transmission mainshaft. The outboard support plate is reversible. The back side is channeled for another distinct look, but just the flat side will be polished.

eatures:

• 14mm x 85mm (3 3/8) wide belt, the same belt as used on top fuel Harley-Davidson^® race bikes
• Kevlar^™ clutch has nine 6 3/8 diameter frictions & eleven steels for ultimate power transfer
• Speciallly manufactured pressure plate uses up to 9 springs for infinite clutch pressure control
• Hub is manufactured from 7075 aluminum and hard anodized for maximum strength and longevity
• 30-46 tooth combo provides 1.53:1 drive ratio

Belt Drives Ltd.
Polished Kit with Outboard Bearing Support (Top uel Street Drive)
Fits Softail 1990/2006