New products

Marker Light Lens Red Uw/#11417 & #11419 Flat Back Marker Lt W/3 Rail Side Lens

• 12 volt die cast custom oval marker lights with louvered side lights
• Measure 2 ³/₄ long x 1 wide x 1 ¹/₈ high
• Pre-drilled with either a ⁵/₁₆ or ³/₈ counterbored mounting hole
• Great for rear fender struts, front fork brackets, beneath your mirrors or front fender supports
• See below for availability of lens color and bulb type
• Complete with mounting hardware

V-FACTOR
Replacement Red Lens Kit for flat back marker lights
Includes 1 main lens & 1 side lens
(Imported)

Skull Taillight Lens Red/Clear Skull Cat Eye Taillight With 4-1/2" Mt Holes Red Bulb/Led

• Transform your ordinary cateye taillight into a unique eye catcher with minimal cost
• Inside of lens in faceted to improve light dispersement
• Mounts with existing hardware
• Designed for the standard cateye taillight with lens that mounts on 4 ¹/₂ centers including our 11201, 11219 or 11223
• Must be used with red incandescent bulb or red LED's (except 11778)

V-FACTOR
Plastic Red Lens with White Skull

Skull Taillight Lens Clr/Clr Skull Cat Eye Taillight With 4-1/2" Mt Holes Red Bulb/Led

• Transform your ordinary cateye taillight into a unique eye catcher with minimal cost
• Inside of lens in faceted to improve light dispersement
• Mounts with existing hardware
• Designed for the standard cateye taillight with lens that mounts on 4 ¹/₂ centers including our 11201, 11219 or 11223
• Must be used with red incandescent bulb or red LED's (except 11778)

V-FACTOR
Plastic Clear Lens with Clear Skull

Tailight Lens Red Plastic Fits #11215 Custom Fatbob Taillight

• Steel license mount similar to the OE type, but designed for our custom taillight
• 12 volt taillight fits snugly under the at Bob rear fenders for a matching contour
• Can also be used for custom applications when used with our 22004 or our 22009 7 wide at Bob rear fenders

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Plastic Taillight Lens only
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

Red Cateye Lens, With Gasket 4-1/2" Mt Holes, Fits #11247 Superthin LED Cateye Lamp Only

• Super thin design measures a mere ⁵/₁₆ thick
• CNC machined from billet aluminum
• ¹/₄ studs mount on 2 centers
• eatures 30 red LED bulbs for the running/brake light function & 6 white LED bulbs for license illumination
• Lens meets DOT & EU requirements
• Includes 18 of lead wire

V-FACTOR
Red Replacement Lens for 11247
Includes gasket & screws

Taillight Lens, Clear Cateye For Cateye Assemblies #11201, #11223 Clear Plastic

• Available in your choice of the original bulb type or the updated LED (light emitting diode) type
• The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 LEDs for the brake/taillight and 3 LEDs for the license light
• LED lights are not affected by vibration or moisture and have an incredible life span
• The LED lights do not produce any heat and draw only 11.25 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These assemblies include a die cast housing, plastic lens, frosted license plate illumination lens and lead wires
• The flat back housing includes mounting studs on 2 centers

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Clear replacement taillight/brake lens
(Imported)

Mini Bullet Light Lens,Amber Use With #11448
V-FACTOR
Replacement Amber Lens
(Imported)

Mini Bullet Light Lens,Red Use With #11448
V-FACTOR
Replacement Red Lens
(Imported)

Mini Bullet Light Lens,Smoked Use With #11448
V-FACTOR
Replacement Smoked Lens
(Imported)

Oe Style Taillight Solid Lens Bt Spt 1973/1993 Solid Red Color

• Direct replacement for side cars 1979/1998
• Does not have clear license plate illumination panel
• Sold each

V-FACTOR
OE Style Taillight Assembly with Red Lens
Fits Big Twin 1973/1998, Softail 1984/1999 & Sportster 1973/1998

Taillight Lens, Round Fits Sparto Style Taillight Uw #11246 L.E.D. Taillight

• Provides the bobber look of years gone by
• 11250 and 11262 include license plate bracket for easy mounting of 7 x 4 license plate
• The 12 volt taillights are available with your choice of a standard automotive #1157 incandescent bulb or with 12 individual LED lights
• Made from cast aluminum
• Includes rubber mounting gasket and hardware

V-FACTOR
Replacement faceted style taillight lens

Taillight Lens Lay Down Style St 00/E03(Ex Fxstd,Flsts)Flt, Dyna,Spt 99/E03 Red Lens

• Internal facets to achieve smooth external face
• Laydown style matches contour of fender for custom look
• Reduced license illumination window
• Includes built in refector & mounting gasket
• See the electric section for taillight bulb

V-FACTOR
Fits Softail 2000/Early 2003 (except XSTD & LSTS), FLT, Dyna & Sportster 1999/Early 2003
(Imported)

Gasket, Taillight Mount Fits MostHarley Mdls 73-98 Dense Foam, Rpls Hd# 68123-73

• Dense foam material, 3/16 thick

V-FACTOR
Dense oam Gasket (sold each)
Fits most models 1973/1998
Replaces HD# 68123-73

Taillight Lens Red Big Twin 1955/1972 Spt 1956/72 Plastic...Replaces Hd 68090-69

• Original style taillight in chrome
• Includes a 12 volt bulb and approximately 46 of lead wire

Note: This taillight is not DOT approved and should be used accordingly.V-FACTOR
Red Plastic Replacement Taillight lens
Fits Big Twin 1955/1972, Sportster 1956/1972 & many custom applications
Replaces HD# 68090-69
(Imported)

License Plate Mtg Hrdw Kit Acorn Nuts W/Screws & Washers Chrome Plated Colony 7815-4

• Acorn nut kit is designed to eliminate vibration between plate and bracket
• Chrome Plated hardware and rubber insulators

Colony
Fits all slotted brackets on many makes and models

Red Marker Light Lens Old Style Turn & Parking Rpls Hd 68571-50 & 68699-78T

• A beautiful copy of theHarley-Davidson^® old style marker lights with 12 volt bulb and hidden wire mounting base
• Includes rubber mounting gasket and ⁵/₁₆ mounting stud with nut
• See below for availability of bulb and lens color

V-FACTOR
Replacement red ring style taillight lens
Replaces HD# 68571-50 & 68699-78T

Amber Running Light Lens Fits #13243 License Plate Frame,Hardware Not Included

• Sturdy die cast aluminum construction
• 12 volt lights with amber lenses can be used as running or directional lights and are angled outward for improved visibility from the side
• Hardware included

V-FACTOR
Replacement Amber Lens for 13243
Fits right or left side
(Imported)

V-Twin Manufacturing Clear H.L. Replica Glass Lens, 1935-47 - Sold Each

Replica clear glass lens for spring fork.

OEM: 67701-35

EL 1936-1940
FL 1941-1948

V-Twin Manufacturing Amber FX Signal Lens, 2000-up Deuce - Set

Amber lens set for turn signal.

OEM: 68973-00

FXSTD 2000-UP

V-Twin Manufacturing Red Lens Only for Diamond Rear Light - Sold Each

Red lens for diamond style tail lamp.

Replacement application for diamond tail lamp

Tech Note:

Replacement lens for #33-2128 diamond tail lamp

V-Twin Manufacturing Frosted Front Replica Glass Lens, 1935-66 - Sold Each

Replica frosted glass lens is for antique applications, for show use only on a front fender lamp.

OEM: 68455-35

FL 1941-1948
VL 1935-1939
EL 1936-1940
UL 1937-1948

V-Twin Manufacturing Clear Rear Replica Glass Lens, 1947-54 - Sold Each

Clear top lens for tail lamp

OEM: 68093-47T

FL 1947-1954

V-Twin Manufacturing Plastic w-Gasket Red Lens Replica Taillight - Sold Each

Red plastic tombstone tail lamp lens with gasket.

FL 1947-1954

V-Twin Manufacturing Plastic Clear Top Lens Replica Taillight - Sold Each

Clear plastic top lens for tombstone style lamp.

OEM: 68093-47

FL 1947-1954

V-Twin Manufacturing Red Rear Replica Glass Lens, 1939-46 - Sold Each

Red glass lens beehive style tail lamp.

OEM: 68090-39

WL 1939-1946
G 1939-1946
UL 1939-1946
EL 1939-1940

V-Twin Manufacturing Clear Plastic Beehive Taillamp Top Lens - Sold Each

Top plastic clear lens for beehive style tail lamp.

OEM: 68094-39

WL 1939-1946
G 1939-1946
UL 1939-1946
EL 1939-1940

V-Twin Manufacturing Red FLH Signal Lens, 1986-up - Set

Red front lens set for turn signal on FL models.
*NOTE: D.O.T approved.
OEM: 68440-86A

FLT 1986-UP