New products

Fender is constructed of steel and is 13-1/2" wide x 38" long. It is smooth formed and not drilled for builders' application.
We suggest pre fitting the fender prior to painting.

Custom application for 330 Tire

MCM 2-1/4" Vortex drag pipe set features 2-3/8" diameter full coverage chrome heat shields, 2-1/4" header pipes and black ball milled vortex ends.

XL 1986-2003

Features a Replica 19" x 2.5" drop center rim, a chrome hub with 1" bearings, and 40 chrome spokes.
Single disc or dual disc wheel is assembled and ready to directly bolt onto 49mm forks.

FXD 2006-2007

Chrome outer primary cover kit comes with 5-hole derby gaskets.

60543-99

FXD 1994-2005
FXST 1995-2006
FLST 1995-2006
FXDWG 1994-2005

Front 21" x 3.25" dual disc wheel assembly features a chrome hub with all internal bearings installed, 40 spokes, and a chrome rim laced and trued.
NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation.

FLT 2008-2008 Dual Disc

Replica chrome 1" handlebar for stock replacement with a 2" knurled center spacing and indents for wiring.

45-7/8" Russell braided stainless steel front brake hose.
*D.O.T. Approved

OEM 45121-88B

FXS 1971-1984
XLH 1988-1998 1200
FXRC 1988-1994
XLH 1987-1998 883 Deluxe
XLH 1988-1993
XLH 1987-1995 883 Hugger
FXRS 1988-1994
FXR 1988-1994

Side plates are non-detachable and can mount sissy bars with a width of 8-3/4" in a chrome finish.
Set of two.

FLSTN 2000-2017
FLSTC 2000-2017
FLSTS 2000-2017

Chrome exhaust header set features down draft style slash cut ends with a " outer diameter and oxygen sensor ports welded in place. Bracket included that connects the 2 header pipes together, does not mount to frame.

For Evolution, TC-88, and XL models as listed. Pipes feature 18mm oxygen sensor bungs and includes plugs for non EFI applications.
Order baffles (VT-30-0103) and flange gaskets separately. 

*NOTE: Baffle set may require cutting to desired length. Bracket connects the front and rear pipe together for added support.

*NOTE: 2011-up applications will require the separate purchase of V-Twin #32-6578, O2 sensor adapter plugs.

*NOTE: 2012-17 FXST applications will require the separate purchase of reducer plugs.

FXD 1991-2017
FXST 1986-2017
FLST 1986-2017
XL 1986-2013 with Forward Controls only.

Chrome lake "y" style dumper exhaust header pipe is designed to look like hot rod side exhausts. The turn out end is 3" diameter. Fits with forward controls only.
Header pipes is 2" with 16 gauge steel construction.

*NOTE: These pipes will not work with floorboards. Collector is not baffled.

FXST 2000-2006

FXD lower triple tree features a chrome finish and accepts 49mm fork tube, narrow types.

FXD 2008-2017
FXDB 2013-2017
FXDC 2008-2017

Custom rear master cylinder has 3/4" bore and comes complete with piston assembly.
Custom rear master cylinder features 2-1/4" spacing between mounting bolts, 3/8" x 24 thread for banjo bolt, milled body design and measures 3-1/2" long x 1-1/4" wide x 3" tall with 1 thru hole and 1 tapped hole for mounting. This master cylinder can be used on forward control kits.

ustom application for forward control

Chrome 5-speed outer primary cover.

*NOTE: Must order a 1.000" outer diameter starter shaft bushing and screw kit separately. 

OEM No: 60665-89

FLT 1989-1993
FXR 1989-1993

Seat T and piston kit includes T, cylinder with internal spring, nose mount and related hardware. Drilling and tapping of frame required.

FXST 1984-1999
FLST 1986-1999

Chrome stock type outer headlamp trim rim is used on 7" diameter shell.
Clips are included. Mounts the same as stock ring for easy installation.

67712-83B

FLHR 1994-UP Stock type
FLT 1983-UP Stock type

17-15/16" Russell braided stainless steel rear brake hose.
*D.O.T. Approved

FXDX 1999-1999
FXDL 1992-1999
FXDWG 1993-1999
FXDS 1994-1999
FXDC 1992-1992
FXD 1995-1999
FXDB 1991-1991
FXDB 1992-1992

Black 2:1 exhaust header set features lake style 3" big diameter turn out ends that are baffled, full coverage black heat shields and 1-3/4" header tubes. Turn out end is clamped on and will allow the installer to rotate into the desired position.

*NOTE: Maximize your motorcycles performance and efficiency by complementing your new Wyatt Gatling exhaust system with a fuel turner management system and or EFI remapping. Remapping is suggested to optimize performance while reducing the possibility of damage to your motor or new exhaust system.

*NOTE: The footboard spacer with lock pin may be required.

***NOTE: End is lake type profiled oval. Tucks in close to saddlebag and side cover.

FLT 2017-Up

Black 2:1 exhaust header set features lake style 3" big diameter turn out ends that are baffled, full coverage black heat shields and 1-3/4" header tubes. Turn out end is clamped on and will allow the installer to rotate into the desired position.

*NOTE: Maximize your motorcycles performance and efficiency by complementing your new Wyatt Gatling exhaust system with a fuel turner management system and or EFI remapping. Remapping is suggested to optimize performance while reducing the possibility of damage to your motor or new exhaust system.

*NOTE: The footboard spacer with lock pin may be required.

***NOTE: End is lake type profiled oval. Tucks in close to saddlebag and side cover.

FLT 1996-2016

Kit includes pedal, plate, 36-1/2" cable, and handle.
Order footpegs separately.

Custom Application

Kit includes 2 bushing assemblies, spacers, plastic retainer rings, rubber isolators and 1 pivot shaft with locknut.
Mounting kit includes all parts to mount transmission and swingarm to pivot block. Will work with stock or aftermarket rubber mount swingarm frame.

FLT 2002-2008

Chrome 2 into 1 exhaust lake style header pipes are designed to look like the hot rod side exhausts with 18mm oxygen sensor bungs. Includes heat shield and hardware.
The turn out end is 3" in diameter. Fits with forward controls only. Will not fit with mid controls but will fit FXR models with forward controls. Header pipes are 1-3/4" with 16 gauge steel construction. Accepts 18mm oxygen sensor units, bungs may be plugged for earlier appilcations. Will also work on many Rigid, Chopper, and Bobber models with left side drive.

**NOTE: These pipes will not work with floorboards. Collector is not baffled.

FXDWG 1991-2011
FXR 1986-1994
FXST 1986-2011

Handlebar switch kit has chrome switches and wire is 50" long with terminals and terminal ends for models with radio and cruise control.
Kit includes 10 switches.

Volt-Tech

FLT 1996-2006

Chrome engine bar features 1-1/4" tubing with rubber pads on foot rests.

FXD 2006-2017 with mid or forward controls
FXDWG 2006-2017 with mid or forward controls

*NOTE: Will not work with floorboards.

*WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object.

Adjustable passenger footboard mount set only features a black finish.
Order footboards and mats separately.

OEM-50768-07

FLT 1993-UP

Breather bolt set in zinc finish. Bolts are 3/8" x 16 thread
OEM No: 29465-08 Breather bolt set in zinc finish. Bolts are 3/8" x 16 thread Fits Harley-Davidson models: FXST 2008-UP FLST 2008-UP UOM: 2 - PR Country of Origin

OEM: 29465-08

FLST 2008-2017
FXST 2008-2017

4" chrome alloy velocity stack for CV Keihin carburetor.

FLST 1990-2017
XL 1988-UP
FXD 1990-2017
FXST 1990-2017
FLT 1990-UP
FXR 1990-1994