S & S Motorcycle Gear Drive Cams

Filter

Filter

Brand

clear

Collection

clear
S & S Motorcycle Gear Drive Cams from K and G Cycles!
7 products

7 products

Sold Out
S&S CYCLE 625 Series Cam Kit, Gear, exhaust close 20, Harley 06-16 FX 07-16 FL
S&S Cycle
$948.95
Quick view
S&S CYCLE 585 Series Cam Kit, Gear, exhaust close 20, Harley 06-16 FX 07-16 FL
S&S Cycle
$948.95
Quick view
S&S CYCLE 583 Series Cam Kit, Gear, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 99-06 FX 99-06 FL
S&S Cycle
$948.95
Quick view
S&S CYCLE 583 EZ Easy Start Cam Kit, Gear, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 99-06 FX 99-06 FL
S&S Cycle
$1,070.95
Quick view
S&S CYCLE 551 Series Cam Kit, Gear, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL
S&S Cycle
$948.95
Quick view
S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL
S&S Cycle
$1,070.95
Quick view
S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL
S&S Cycle
$1,070.95
S&S CYCLE 585 Series Cam Kit, Gear, exhaust close 20, Harley 06-16 FX 07-16 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE 585 Series Cam Kit, Gear, exhaust close 20, Harley 06-16 FX 07-16 FL

DS-09250158

$948.95

In Stock

Save $-948.95
/
Shipping calculated at checkout.
S&S CYCLE 585 Series Cam Kit, Gear, exhaust close 20, Harley 06-16 FX 07-16 FL
  • Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
  • Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
  • Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
  • Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
  • A hydraulic press and other professional-level tools are required to install these kits
  • S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
  • Cam bearings and gaskets must be replaced when installing new cams
  • Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.
  • Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
  • Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
  • Made in the U.S.A.
S&S CYCLE 583 Series Cam Kit, Gear, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 99-06 FX 99-06 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE 583 Series Cam Kit, Gear, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 99-06 FX 99-06 FL

DS-09250744

$948.95

In Stock

Save $-948.95
/
Shipping calculated at checkout.
S&S CYCLE 583 Series Cam Kit, Gear, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 99-06 FX 99-06 FL
  • Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
  • Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
  • Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
  • Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
  • A hydraulic press and other professional-level tools are required to install these kits
  • S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
  • Cam bearings and gaskets must be replaced when installing new cams
  • Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.
  • Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
  • Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
  • Made in the U.S.A.
S&S CYCLE 583 EZ Easy Start Cam Kit, Gear, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 99-06 FX 99-06 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE 583 EZ Easy Start Cam Kit, Gear, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 99-06 FX 99-06 FL

DS-09250454

$1,070.95

In Stock

Save $-1,070.95
/
Shipping calculated at checkout.
S&S CYCLE 583 EZ Easy Start Cam Kit, Gear, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 99-06 FX 99-06 FL
  • Start any engine regardless of displacement or compression ratio with a stock starter
  • Save your starter and battery; tested for 10,000 starts without running battery down
  • Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Available in chain drive and gear drive versions
  • All chain-drive cams include installation kit
  • All gear-drive cams include 4-gear set and installation kit
  • Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.
S&S CYCLE 551 Series Cam Kit, Gear, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE 551 Series Cam Kit, Gear, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL

DS-09250742

$948.95

In Stock

Save $-948.95
/
Shipping calculated at checkout.
S&S CYCLE 551 Series Cam Kit, Gear, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL
  • Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
  • Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
  • Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
  • Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
  • A hydraulic press and other professional-level tools are required to install these kits
  • S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
  • Cam bearings and gaskets must be replaced when installing new cams
  • Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.
  • Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
  • Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
  • Made in the U.S.A.
S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL

DS-09250453

$1,070.95

In Stock

Save $-1,070.95
/
Shipping calculated at checkout.
S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL
  • Start any engine regardless of displacement or compression ratio with a stock starter
  • Save your starter and battery; tested for 10,000 starts without running battery down
  • Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Available in chain drive and gear drive versions
  • All chain-drive cams include installation kit
  • All gear-drive cams include 4-gear set and installation kit
  • Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.
S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL

DS-09250448

$1,070.95

In Stock

Save $-1,070.95
/
Shipping calculated at checkout.
S&S CYCLE 551 EZ Easy Start Cam Kit, Gear, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL
  • Start any engine regardless of displacement or compression ratio with a stock starter
  • Save your starter and battery; tested for 10,000 starts without running battery down
  • Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
  • Available in chain drive and gear drive versions
  • All chain-drive cams include installation kit
  • All gear-drive cams include 4-gear set and installation kit
  • Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.