All

Set features a spiral wound coated core that is a blend of copper and nickel bonded by a latex cover which is designed to reinforce and assist in holding core resistance to 50 ohms. 2009-2016 FLT

Sumax colored 8mm plug wires for EFI models are pre-cut and have the plug coil boots and terminals already installed. Spark plug wire set is designed for electronic ignitions. 1999-2008 FLT

Sumax colored 8mm plug wires for EFI models are pre-cut and have the plug coil boots and terminals already installed. Spark plug wire set is designed for electronic ignitions. 2009-2016 FLT

Sumax colored 8mm plug wires for EFI models are pre-cut and have the plug coil boots and terminals already installed. Spark plug wire set is designed for electronic ignitions. 2018-UP FXST 2018-UP FLST

Sumax spark plug wire set is pre-cut and have the plug coil boots and terminals already installed. Spark plug wire set is designed for electronic ignitions but work great on point type ignitions. Wire kit is black 8mm type. 2018-UP FXST 2018-UP FLST

Sumax spark plug wire set is pre-cut and have the plug coil boots and terminals already installed. Spark plug wire set is designed for electronic ignitions but work great on point type ignitions. Wire kit is blue 8mm type. 2018-UP FXST 2018-UP FLST

Sumax spark plug wire set is yellow with a black and red tracer. A combination Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance delivers greater spark energy while improving power idle and fuel efficiency. Cloth jacket is rated at 450°F and resists heat oil and abrasion. These ires will work on all models with point or electronic ignitions. Set includes 21-1/2 lead with 180° plug boot & 180° coil boot as well as 9 lead with 180° plug boot and 90° coil boot. 1980-1998 FLT 1986-2006 XL

Sumax spark plug wire set is yellow with black & red tracer. A combination Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance delivers greater spark energy while improving power idle and fuel efficiency. Cloth jacket is rated at 450°F and resists heat oil and abrasion. These wires will work on all models with point or electronic ignitions. Set includes two 21-1/2 lead with 180° plug boot and 180° coil boots. 1999-2008 FLT with EFI

Sumax spark plug wire set is yellow w/ black & red tracer. A combination Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance delivers greater spark energy while improving power idle and fuel efficiency. Cloth jacket is rated at 450°F and resists heat oil and abrasion. These wires will work on all models with point or electronic ignitions. Set includes 35 & 17 leads with 90° coil boots and 135° plug boots. 2009-2016 FLT

Sumax spark plug wire set is yellow with a black and red tracer. A combination Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance delivers greater spark energy while improving power idle and fuel efficiency. Cloth jacket is rated at 450°F and resists heat oil and abrasion. These wires will work on all models with point or electronic ignitions. Set includes 21-1/2 lead with 180° plug boot & 180° coil boot as well as a 9 lead with 180° plug boot & 90° coil boot. 1999-2006 FLT with carburetor 2007-UP XL

Sumax spark plug wire set is yellow w/ black & red tracer. A combination Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance delivers greater spark energy while improving power idle and fuel efficiency. Cloth jacket is rated at 450°F and resists heat oil and abrasion. These wires will work on all models with point or electronic ignitions. For use with universal sets with 90° boots. Set includes two 24 leads with black plug boots. Custom Application

Sumax spark plug wire set is yellow with a black and red tracer. A combination Kevlar Helically Spiral Wound Core at 350 ohm per foot resistance delivers greater spark energy while improving power idle and fuel efficiency. Cloth jacket is rated at 450°F and resists heat oil and abrasion. These wires will work on all models with point or electronic ignitions. Set includes 16 & 17 leads with 90° plug boots and 180° coil boots. 2018-UP FLST 2018-UP FXST

Super E needle seat with elbow. Does not include needle. *NOTE: Must order needle separately. 0-Special application for S&S E" series carburetors"

Amber single filament super flux LED bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Typical indicator LED's are designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 1156 type bulb for signals. 0-All turn signals

Amber dual filament super flux LED bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 1157 type bulb for tail lamps. 0-All tail lamps

13 amber single filament super flux LED wedge bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3156 type bulb for signals. 0-All turn signals

8 amber activated with 5 white running dual filament super flux LED bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 1157 type bulb for tail lamps. 0-All tail lamps

Eight amber activated with 5 white running single filament super flux LED bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 1156 type bulb for signals. 0-All turn signals

Clear super flux dual filament LED bulb features clear band. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3157 type bulb for tail lamps. 0-All tail lamps

Red single filament super flux LED bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 1156 type bulb for signals. 0-All turn signals

8 red activated with 5 white running single filament super flux LED bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 1156 type bulb for signals. 0-All turn signals

White single filament super flux LED bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 1156 type bulb for signals. 0-All turn signals

13 amber dual filament super flux LED wedge bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3157 type bulb for tail lamps. 0-All tail lamps

8 amber activated with 5 white running dual filament super flux LED wedge bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3157 type bulb for tail lamps. 0-All tail lamps

8 amber activated with 5 white running single filament super flux LED wedge bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3156 type bulb for signals. 0-All turn signals

Red super flux dual filament LED bulb features clear band. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3157 type bulb for tail lamps. 0-All tail lamps

13 red single filament super flux LED wedge bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3156 type bulb for signals. 0-All turn signals

8 red with 5 white running single filament super flux LED wedge bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3156 type bulb for signals. 0-All turn signals

13 white single filament super flux LED wedge bulb. LED stands for light Emitting Diode and is an electronic light source. All early devices emitted low-intensity read lights but modern LED's are available across the ultraviolet and infrared wavelengths with very high brightness. Designed to operate with no more than 30-60 milli watts of electrical power and are subject to very limited wear and tear if operated at low currency and at low temperature. Fits 3156 type bulb for signals. 0-All turn signals 1948-1950 FL

Patches can be ironed or sewn on. Sold in a pair. Set of two. **NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Support rod stud repair kit for side cars 1937-1952 EL 1937-1948 UL 1941-1984 FL

Swingarm chrome dome cover set. 2008-UP FXST