All

Tear drop tank emblem kit includes mount strips with adhesive. Mount with adhesive to place in desired position then braze in place for permanent placement. 1936-1952 W 1936-1952 EL 1941-UP FL 1971-UP FX 1957-UP XL 1936-1973 G

Chrome tear drop mirror measures 4 X 2 and includes steel stems. Set includes right and left sides. 1965-UP All models for left and right side application

Linkert teardrop carburetor cover kit includes a mount base with hardware and chrome tank emblem shaped cover. As seen on 1947 Knucklehead! For all Keihin-Bendix Linkert carburetor bolt patterns. Fits right or left side. 1936-1952 W 1936-1952 EL 1941-1987 FL 1971-1984 FX 1971-1987 XL

Techno style gas cap set for the right and left side. Set is constructed of light weight metal and is chrome plated. 1996-1999 FXST 1996-1999 FLST

Includes one each; Hudson Valley AMCA Angola Roller Rink Cornwall Kleig Newburgh Kamizaze Pit Wall of Death 1940 World's Fair Montgomey Drag Strip Dover Drag Strip Washington Newburgh Stamp and a Tedd Cycle patch. 9 piece set. Can be ironed or sewn on. 0-All

Oval metal sign is in full color with embossed letters. 0-All

Tedd Cycle Patch can either be ironed or sewn on. This patch measures 1.7 x 3 . Set of two. **NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Tedd Cycle Patch can either be ironed or sewn on. This patch measures 2-1/4 x 4 . Sold as a pair. **NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Thor rear hub assembly with nickel plated finish made by Michael Lange Company. Assembly features 18 spoke holes on each end. The THOR Company has made hubs for many different motorcycle brands. Harley-Davidson mainly used THOR Hubs whereas other brands like Musselman Eclipse New Departure and Corbin were available upon request. There is nothing on the left side of the hub so it may be used on both belt and chain drive models. To use this hub on a 1911 belt drive single or twin would require a THOR coaster brake rear hub and a belt pulley attached to the wheel rim. *NOTE: Must
49-5513" Thor rear hub assembly with nickel plated finish made by Michael Lange Company. The THOR Company has made hubs for many different motorcycle brands Harley-Davidson mainly used THOR Hubs whereas other brands like Musselman Eclipse New Departure and Corbin were available upon request. There is nothingon the left side of the hub so it may be used on both belt and chain drive models. To use this hub on a 1912-1913 would require a THOR coaster brake rear hub and a belt or chain drive clutch on the left side of the hub. Order left side rear sprocket separately. 0-All 1911 models

1912-1913 JD models

Throttle cable bracket has a parkerized finish and mounting hardware as original. 1941-1948 FL 1938-1948 EL 1938-1948 UL

ThunderJet EFI intake manifold for 5.037 long cylinders. is an oversize CNC machined casting that replaces the 44mm factory design used on Delphi equipped models. This system substantially raises intake airflow capabitities for impressive performance gains and answers the demand for airflow in performance engines! Designed to accept the factory electronic components including the injectors making assembly a snap! Order throttle body air filter and cover separately. Custom application

Tillotson adjustable carburetor needle kit includes needle with T handle jet spring threaded insert o-ring and sealing gasket. Seven piece kit for all Tillotson carbs on Sportster and Big Twin models. 1966-1970 XL 1966-1970 FL

Tillotson diaphragm cover replaces OEM carburetor 27804-66A on Harley FL and XL models. Pump base is accurately molded out of white plastic for the perfect fit and function. 1966-1970 XL 1966-1970 FL

Tillotson carburetor pump assembly includes leather pump piston with shaft rubber boot and spring that are assembled. Angle bracket not included. 1967-1970 FL

Tillotson carburetor upgrade kit includes adjustable main jet kit and billet alloy ticker assembly. Kit is for use with Tillotson carburetors only. Parts are packaged inside a V-Twin decorative tin. 1966-1970 FL 1966-1970 XL

Tillotson carburetor parts kit includes the fuel inlet adjustable needle kit tickler kit idle mixture screw base pump needle and seat gasket and hardware kit. Kit is for use with Tillotson carburetors only. Parts are packaged inside a V-Twin decorative tin. 1966-1970 FL 1966-1971 XL

Tillotson tickler kit is used for fuel activation. Tickler includes bracket brass pen and spring. Tickler mounts to the diaphragm cover. 1966-1970 FL 1966-1970 XL

Cadmium timer cable clamp 1949-1964 FL

Cadmium plated timer cable clamp. 1936-1958 WL

Reverse counter clockwise rotation circuit breaker timer gear allows use of any electronic type single or dual fire late type ignitions to be installed in timer housing. Includes distributer gear pin. Order circuit breaker gear separately. 1936-1952 EL 1941-1969 FL

Timer wire clip. 1938-1939 EL 1941-1965 FL 1938-1947 U 1957-1965 XL

Timing hole lock tool for point type flywheels is used to lock flywheels in position. Tool screws into timing hole and will find top dead center on flywheels by locating the timing mark detent with plunger. Plunger is spring loaded for a positive lock on timing dot or timing mark. 0-All

This simple to use tool is a safe way to start and seat beads on all tire sizes. The linked straps apply even seating pressure to tire beads without compressed air. Tool is portable for on the go use and is simple and effective for even mounting a new 300 Series tire. 0-All models

Parts kit for use with aftermarket tombstone tail lamps. For upgrading V-Twin aftermarket tail lamps for the most authentic look! Rim includes in kit is chrome. 1947-1949 FL

Parts kit for tombstone tail lamps. For use on 1950-54 OE tail lamps which have the license plate tag bracket fastened by two countersunk screws. The rim included in this kit is chrome. 1950-1954 FL

Parts for use with OE tombstone tail lamps. Fits on 1947-49 OE tombstone tail lamps where the license plate bracket is riveted in place. Must remove rivets and replace with countersunk screws included. The rim included in this kit is chrome. 1947-1948 FL 1947-1949 W

Original style Tombstone tail lamp rubber bushing installs through the fender and has two separate holes for two wires. 1947-1954 FL

Tool box mounting kit has a parkerized finish. 1936-1940 EL 1941-1961 FL

Top end gasket kit includes fire rings with gaskets. 1978-1984 FL 1978-1984 FX

Black finish top motor mount stabilizer kit features adjustable stabilizer links and all hardware needed. The rubber isolated links reduce engine vibration and allows better alignment of the power train. 1992-2004 FXD

Black finish top motor mount stabilizer kit features adjustable stabilizer links and all hardware needed. The rubber isolated links reduce engine vibration and allows better alignment of the power train. 2005-2017 FXD

Chrome finish top motor mount stabilizer kit features adjustable stabilizer links and all hardware needed. The rubber isolated links reduce engine vibration and allows better alignment of the power train. 1992-2004 FXD

Chrome finish top motor mount stabilizer kit features adjustable stabilizer links and all hardware needed. The rubber isolated links reduce engine vibration and allows better alignment of the power train. 2005-2017 FXD