All

Gator fork boots for 49mm forks are constructed of black rubber and are 9 long. Sold in a quantity of 2. 2007-2017 FXD 2014-UP FLT 2019-UP XL 48""

High contact countershaft 4th gear for 5-speed Big Twins stock ratio. Can be used on 1979-93 models but will require separate purchase of the 4th gear mainshaft. 1994-2006 FXST 1994-2006 FLST 1994-2006 FLT 1994-1994 FXR 1994-2005 FXD

High contact mainshaft 4th gear for 5-speed Big Twins stock ratio. Can be used on 1979-1993 models but will require separate purchase of the 4th gear countershaft. 1994-2006 FXST 1994-2006 FLST 1994-2006 FLT 1994-1994 FXR 1994-2005 FXD

5 flat fender bracket features a raw steel construction. *NOTE: Weld or bolt to fender braces or sissy bar. Custom application for rigid frames

5 JD rear fender is blank raw steel without brackets or holes and can be used for restoration or customization. Exact width as JD 1920's Harley's. *NOTE: One piece full 180° fender is long enough with enough material so that it may be cut or split to desired length for specific applications. 1926-1929 JD

Mini shock is 5 long with exposed springs. *NOTE: Weight capacity is for 1 rider under 300lbs. Custom application

Untrimmed ribbed fender with a raw finish and is 5 wide and 1mm thick. Ends unfinished. *NOTE: Fender is shipped with partial skirt the builder or fabricator can cut side panels as desired or remove completely to suit installation. Custom application

5 steel ribbed fender features a raw finish with a rolled edge. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. Custom application

5 gallon waste can is steel with full color lithographed graphic. The round opening is 7.5 . This 5 gallon can will hold about $390 in pennies (weight 180 lbs.) and close to $5000 in quarters (weight 1 260 lbs) as they are not neatly stacked but in random order. 0-All models

Contour ignition system cover with 5 holes. 1999-UP FXST 1999-UP FLST 1999-UP FLT 1999-2017 FXD

Buco style 1 outer diameter bar has knurls in proper position for use with Flanders risers and dog bone triple trees. For use with snap throttle and 1 grip sets. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1936-1948 EL 1941-1948 FL 1941-1957 G 1936-1952 W

1-1/4 black handlebar with indents for external wiring. These handlebars are 1-1/4 outer diameter at the riser area. Bars are indented at the grip area. The wire hole is located at the underside of the bar. *NOTE: For fitment application purchase 1-1/4 risers separately. Bars do not fit 2015-up FLTR Road Glide models. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. Custom application for use with 1-1/4 risers"

5-1/2 headlamp is fish eye style and features a black finish. The center fish eye is high beam and low beam and is a 12 volt 55/35W H3 bulb. The round LED light is the position light The ring includes LED's and the center light is halogen. Custom application

5-1/2 headlamp is fish eye style and features a chrome finish. The center fish eye is high beam and low beam and is a 12 volt 55/35W H3 bulb. The round LED light is the position light. Custom application

Replica chrome 1 handlebar for stock replacemnt on FLSTF FLHR and FLH with a 2 knurled center spacing and indents for wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1990-2000 FLSTF 1982-1984 FLH 1994-1999 FLHR 1993-1996 FLSTN

Black 1 handlebar feature early chopper styling with indents for external wiring. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

5-3/4 Bates style bottom mount LED headlamp with a black housing and a central running lamp. Features 12 volts high/low beam and mounting stud. *NOTE: LED halo ring can be used as a parking lamp. 0-All models

5-3/4 Bates style bottom mount LED headlamp with a black housing and without a central running lamp. Features 12 volts high/low beam and mounting stud. *NOTE: LED halo ring can be used as a parking lamp. *NOTE: High Beam = 12.8 V : 21.5 W Low Beam = 12.8 V : 15.0 W Circle Position Lamp= 14 V : 1.9 W. 0-All models

5-3/4 Bates style bottom mount LED headlamp with a chrome housing and a central running lamp. Features 12 volts high/low beam and mounting stud. *NOTE: LED halo ring can be used as a parking lamp. 0-All models

5-3/4 Bates style bottom mount LED headlamp with a chrome housing and without a central running lamp. Features 12 volts high/low beam and mounting stud. *NOTE: LED halo ring can be used as a parking lamp. *NOTE: High Beam = 12.8 V : 21.5 W Low Beam = 12.8 V : 15.0 W Circle Position Lamp= 14 V : 1.9 W. 0-All models

5-3/4 LED daylight headlamp unit include black backplate and features two D shaped optical lenses single low beam lens and three high beam lenses. Low beam pattern remains on at all times. The switched high beam adds additional punch down the middle of the road. LED lamps are DOT and ECE compliant. 2006-2011 VRSCD 2006-2011 VRSCDX 2004-UP XL 1991-2017 FXD Excludes FLD and 1991-2005 FXDWG 1984-1999 FLSTS 1984-1999 FXSTS 2008-2001 FLSTSB 2005-2006 FLSTC 2010-2012 FLSTE 2000-UP FXCW 2000-UP FXS 2000-UP FXSB 2000-UP FXST

Black H4 5-3/4 headlamp features a 60/55 watt bulb and LED outer ring parking lamp. The housing is bottom mount style and made from high quality steel with indent patterns fitted with glass lens and diamond cut reflectors. 0-All Models

Black H4 5-3/4 headlamp features a 60/55 watt bulb and a cold cathode florescent outer ring packing lamp. The housing is bottom mount style and made from high quality steel with indent patterns fitted with glass lens and diamond cut reflector. 0-All Models

Chrome H4 5-3/4 headlamp features a 60/55 watt bulb and a outer LED ring packing lamp. The housing is bottom mount style and made from high quality steel with indent patterns fitted with glass lens and diamond cut reflector. 0-All Models

Chrome H4 5-3/4 headlamp features a 60/55 watt bulb and cold cathode florescent outer ring parking lamp. The housing is bottom mount style and made from high quality steel with indent patterns fitted with glass lens and diamond cut reflector. 0-All Models

5-3/4 headlamp features bottom mount and H-4 bulb with a brass plated rim. 0-All models

5-3/4 LED daylight headlamp unit with black shaded reflector features two D shaped optical lenses single low beam and single high beam. Made for high and low beam and will plug into harness. Custom application for 5-3/4 custom headlamps"

5-3/4 LED daylight headlamp unit with black shaded reflector and daytime running light LED ring. 1985-UP XL

Chrome 5-3/4 headlamp includes 55/60 watt H4 bulb with socket Includes insulator tube to cover wire connectors. **NOTE: For show use only not DOT approved. Custom application

Paughco 5-3/4 tear drop style headlamp. Headlamp is equipped with a high and low beam. *NOTE: For show or decorative use only and are not D.O.T. approved. Custom application

Black 5-3/4 replacement headlamp includes H-4 12 volt 60/55 watt clear halogen bulb and rubber boot. Sportster replacement headlamp mounts from the top just like the original.*NOTE: D.O.T approved. 1960-1973 XL 1971-1973 FX

This black visor style trim rings recesses the headlamp into the housing and adds a traditional eyebrow design to the headlamp shell. Stretches the profile of the bike for a long lean appearance. 2004-UP XL 883/883L/883N/883R/1200L/1200N/1200R/1200T/1200X/1200XS 2016-UP XL 1200CX 1994-2017 FXD 1994-2015 FXLR 1994-2015 FXST 1994-2015 FXSTB 2008-2017 FLSTSB 2008-2017 FXS 2016-2017 FXSE 1994-1999 FXSTC