All

Belt Drive Part,Front Pulley St L85/06,1-5/8"Wide 8Mm 45T Use W/Offset Insert&Nut 45-Ofp
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1 5/8 wide 45 tooth front pulley only.

Belt Drive Part,Inner Cl Hub Bt Evo 1984/89 Bdl Systems W/Tapered Hub 8Mm Bdl Ev-170

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

G) Inner Clutch Hub. Fits 77017 and 77005.

Belt Drive Part,Inner Cl Hub Bt Evo 1990/L* Bdl Systems W/Splined Hub 8Mm Bdl Ev-180

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

G) Belt Drives Ltd.
Inner Clutch Hub w/Retaining Ring, Fits 77031, 77023, 77025 & 77034

Belt Drive Part,Pulley Covers Fits Bdl 3" Open Drives Ex Sh Pol Alum W/Hardware Md-100

• Baby moon style.
• Polished aluminum.
• Offers better protection and reduces clutch noise.
• Includes special tape for permanent installation and button head bolts if you choose to drill and tap hub for easy on and off access.

NOTE: Does not include center plate pictured.

Polished aluminum pulley covers, includes double stick tape and screws for mounting. Fits 5 speed 3 open drives (Softail 1986/Later, FLT 1990/Later and FXR 1990/1994).

Belt Drive Pri & Cl Kit 8MM Softail & Dyna 5 Spd 1990/20061-5/8" Belt

Evbb-2Sl

Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited. Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stress proof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized.

Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required.

Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. or replacement parts, see the drive train section for clutch or starter ring gear.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.Belt Drives Ltd.
1 ⁵/₈ wide Belt Drive Kit with Clutch
Fits Softail & Dyna 5 speed models 1994/2006 with spline clutch hub, 45-68 tooth combo
* Includes the earlier style heavy duty 66 tooth starter ring gear and a matching 9 tooth starter pinion gear

Primary belt for front belt drive on 45 models has 120 teeth. 1936-1952 W 1936-1963 G

Belt Drive Primary Kit,1-1/2" Fits Softail And Dyna 2007/L* Inc Lock Up Clutch Evb-8Sl

• Enclosed 1 1/2 belt drive with ball bearing lock up clutch kit for stock to extreme horsepower motors
• 36-69 tooth combo provides 1.33:1 drive ratio

Belt Drives Ltd.
Polished Kit
Fits Softail 2007/2008

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.
Belt Drives Ltd.
2" Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1955/1984 with splined engine sprocket shaft fits 77009

BELT DRIVES LTD. 1" Closed Belt Drive Kit, made in the usa, Each, specific application, teeth 142, Harley 07-13 FX 07-16 FL

• One of BDL's original closed primary belt drives
• Kit includes 52-tooth front pulley, 142T-belt, complete clutch kit with ring gear and ball bearing pressure plate and hardware
• Clutch features 12 cylindrical replaceable clutch dogs, which allow clutch plates to maintain constant contact
• Kevlar clutch plates allow maximum performance with improved ball-bearing pressure plate
• Made in the U.S.A.

BELT DRIVES LTD. Ball-Bearing Lock-Up Clutch Conversion Kit, Harley 98-16 FX 98-16 FL

• Standard equipment with all of BDL's 2" SS series primary drives
• Converts existing clutches to a ball-bearing lockup design
• Lockup design applies extra pressure to the clutch plates for positive engagement with no clutch slippage
• No increase in lever pull effort
• Kits include all necessary components for a complete retrofit
• Made in the U.S.A.

BELT DRIVES LTD. Black 2 3/4" Open Belt Drive Kit, Harley 06-16 FX 07-16 FL

• Feature BDL's ball-bearing lockup clutch with ring gear
• Kits include motor plate, 52-tooth front pulley, 142T-belt, starter housing and guard, stand-offs, side guard and rear pulley cover with hardware
• Made in the U.S.A.

BELT DRIVES LTD. Black 2" Belt Drive Kit With Changeable Domes, Harley 90-06 FX 90-06 FL

• 2" drive kits loaded with style to accommodate custom trends
• All-billet construction with a unique top guard that provides long-lasting service and functionality
• Kits include a ball-bearing lockup clutch, a top belt guard and four different dome covers to allow for four different looks in one kit
• Made in the U.S.A.

BELT DRIVES LTD. Black 2" Belt Drive Kit With Top Belt Guard, Harley 90-06 FX 90-06 FL

• Use BDL's ball-bearing lockup clutch for positive clutch engagement and ease of shifting
• Kits also include a Kevlar 142-tooth drive belt, motor plate, starter housing and guard, top belt guard, stand offs, side guard and rear pulley cover with hardware
• Made in the U.S.A.

BELT DRIVES LTD. Black 2" Belt Drive Kit, Harley 07-16 FL

• Include BDL's ball-bearing lockup clutch, new full-coverage side guard and top mesh belt guard
• Kits also include motor plate and a 132-tooth belt
• 2" drive width allows for the use of stock floorboards
• Made in the U.S.A.

BELT DRIVES LTD. Black 2" Belt Drive Kit, Harley 90-06 FL

• Include BDL's ball-bearing lockup clutch, new full-coverage side guard and top mesh belt guard
• Kits also include motor plate and a 132-tooth belt
• 2" drive width allows for the use of stock floorboards
• Made in the U.S.A.

BELT DRIVES LTD. Black 2" Open Belt Drive Kit, Harley 90-06 Softail

• BDL's ball-bearing lockup clutch with ring gear provides ease of shifting and positive clutch engagement
• New streamlined baseplate provides a unique look
• Kits include a Kevlar 142-tooth drive belt, motor plate, starter housing and guard, stand offs, side guard and rear pulley cover with hardware
• Made in the U.S.A.

2006	Harley-Davidson	Softail Heritage EFI FLSTI
2005-2006	Harley-Davidson	Softail Deluxe FLSTN
2005-2006	Harley-Davidson	Softail Springer Classic EFI FLSTSCI
2005-2006	Harley-Davidson	Softail Springer Classic FLSTSC
2005-2006	Harley-Davidson	Softail Deluxe EFI FLSTNI
2001-2006	Harley-Davidson	Softail Standard EFI FXSTI
2001-2006	Harley-Davidson	Softail Springer EFI FXSTSI
2001-2006	Harley-Davidson	Softail Night Train EFI FXSTBI
2001-2006	Harley-Davidson	Softail Heritage Classic EFI FLSTCI
2001-2006	Harley-Davidson	Softail Deuce EFI FXSTDI
2001-2006	Harley-Davidson	Softail Fat Boy EFI FLSTFI
2001-2003	Harley-Davidson	Softail Heritage Springer EFI FLSTSI
2000-2006	Harley-Davidson	Softail Deuce FXSTD
1999-2006	Harley-Davidson	Softail Night Train FXSTB
1997-2003	Harley-Davidson	Softail Heritage Springer FLSTS
1995-1997	Harley-Davidson	Softail Bad Boy FXSTSB
1994-1996	Harley-Davidson	Softail Heritage Special FLSTN
1993	Harley-Davidson	Softail Nostalgia FLSTN
1990-2006	Harley-Davidson	Softail Springer FXSTS
1990-2006	Harley-Davidson	Softail Heritage Classic FLSTC
1990-2006	Harley-Davidson	Softail Fat Boy FLSTF
1990-1999	Harley-Davidson	Softail Custom FXSTC
1990-1993	Harley-Davidson	Softail Standard FXST
1990, 2006	Harley-Davidson	Softail Heritage FLST

BELT DRIVES LTD. Cam Cover Conversion Kit For Twin Cam Motors, Natural, Polished, made in the usa, Aluminum, Each, specific application, Harley 99-06 FX 99-06 FL

• Converts Twin Cam ignitions to earlier Evolution-style electronic ignition
• Can be used with any aftermarket ignition/rotor cup system
• Great when building a custom bike with a kickstart transmission, a Twin Cam engine and gear-driven cams - the stock ignition is not kickstart compatible
• Allows the use of aftermarket Evolution wiring harnesses
• Made from 6061 T-6 billet aluminum with a polished finish
• Kit includes cam cover, special bolt, cam cover end adapter and seal
• Made in the U.S.A.

BELT DRIVES LTD. Chrome 2 3/4" Open Belt Drive Kit, Natural, Harley 06-16 FX 07-16 FL

• Feature BDL's ball-bearing lockup clutch with ring gear
• Kits include motor plate, 52-tooth front pulley, 142T-belt, starter housing and guard, stand-offs, side guard and rear pulley cover with hardware
• Made in the U.S.A.

BELT DRIVES LTD. Chrome 2" Open Belt Drive Kit, Harley 06-16 FX 07-16 FL

• BDL's ball-bearing lockup clutch with ring gear provides ease of shifting and positive clutch engagement
• New streamlined baseplate provides a unique look
• Kits include a Kevlar 142-tooth drive belt, motor plate, starter housing and guard, stand offs, side guard and rear pulley cover with hardware
• Made in the U.S.A.

BELT DRIVES LTD. Clutch Lock-Up Tool, made in the usa

• For use on all BDL belt drive units that have the BDL round clutch dogs
• Designed to help properly torque the clutch basket and hub assembly to the mainshaft of the transmission
• No need to use an impact wrench that can damage the basket, hub or other components
• Made in the U.S.A.

BELT DRIVES LTD. Compensating Sprocket Kit, Harley 06-11 FX 06-13 FL

• Three-piece patented design with no spring
• Weighs less than the stock sprocket
• Made in the U.S.A.

BELT DRIVES LTD. Compensating Sprocket Kit, teeth 24, Harley 80-06 FX 80-06 FL 87 - 94 XL

• Three-piece patented design with no spring
• Weighs less than the stock sprocket
• Made in the U.S.A.

BELT DRIVES LTD. Compensating Sprocket Kit, teeth 25, Harley 80-06 FX 80-06 FL 87 - 94 XL

• Three-piece patented design with no spring
• Weighs less than the stock sprocket
• Made in the U.S.A.

BELT DRIVES LTD. Competitor Clutch, Harley 91 - 16 XL

• Kevlar clutch pack plates have 60% more surface area than stock plates for strong, positive clutch engagement
• PART #1130-0112 features a ball-bearing lockup pressure plate that will handle any application including big-inch motors
• Kit also includes inner clutch hub and diaphragm spring
• Replacement plates available
• PART # 1130-0176 features a standard pressure plate and clutch springs
• Made in the U.S.A.

BELT DRIVES LTD. Competitor Clutch, Heavy-Duty, Harley 90-97 FX 90-97 FL 90 - 94 XL

• Kevlar clutch pack plates have 60% more surface area than stock plates for strong, positive clutch engagement
• PART #1130-0112 features a ball-bearing lockup pressure plate that will handle any application including big-inch motors
• Kit also includes inner clutch hub and diaphragm spring
• Replacement plates available
• PART # 1130-0176 features a standard pressure plate and clutch springs
• Made in the U.S.A.

BELT DRIVES LTD. High-Performance Clutch Kit With Extra Plate, made in the usa, Aluminum, Kevlar, Steel, plates per package 1-10-9, Harley 98-16 FX 98-16 FL

• Includes 10 Kevlar friction plates on 6061 T-6 aluminum cores, nine tempered steel drive plates and a 10% stronger than stock diaphragm spring
• Plates have 11% more surface area for more positive clutch engagement - ideal for big-bore models
• Pre-measured stack height for easy installation
• Made in the U.S.A.

BELT DRIVES LTD. High-Performance Extra Clutch Plate Kit, made in the usa, Kevlar, Steel, plates per package 1-8-9, specific application, Harley 90-97 FX 90-97 FL 90 - 16 XL

• Kit includes nine Kevlar friction plates on tempered steel cores and eight tempered steel drive plates
• Plates feature a starburst groove pattern for maximum heat dissipation and oil circulation
• 15% larger than stock surface area for stronger, more positive clutch engagement - ideal for high-performance stroker motors
• Includes 15% stronger diaphragm spring
• Pre-set stack height for easy installation
• Made in the U.S.A.

BELT DRIVES LTD. Kevlar Clutch Plate Kit, made in the usa, plates per package 6-7, specific application, Harley 84-89 FX 84-89 FL 87 - 89 XL

• Includes six Kevlar plates with tempered steel cores and seven tempered steel drive plates
• Plates measure 25% wider than the OEM plates for a significant increase in the clutch area
• Stack height is pre-set for easy installation
• Can be used in wet or dry clutches
• Made in the U.S.A.

BELT DRIVES LTD. Kevlar Clutch Plate Kit, made in the usa, plates per package 8-9, specific application, Harley 98-16 FX 98-16 FL

• Includes nine Kevlar friction plates on 6061 T-6 aluminum cores and eight tempered steel drive plates
• Stack height is pre-set for easy installation
• Made in the U.S.A.

BELT DRIVES LTD. Monster Top Fuel Belt Drive Kit With Clutch And Outboard Bearing Support, Harley 90-06 FX 90-06 FL

• Kits include front and rear pulley, 33/8" belt, nine Kevlar friction plates and 11 steel clutch plates; use up to nine springs for varying pressure to accommodate any motor size
• Include oil filter mount between the pulleys
• Polished outboard bearing support; outboard support is reversible and the back side is channeled for another distinct look, but only the flat side is polished
• Replacement components available separately; see pages ???
• Made in the U.S.A.

BELT DRIVES LTD. Motor Pulley Locking Plate, 5/16"-18 x 1 1/2" Screws, made in the usa, Each

• For use with BDL's standard, 3/4", 1", 11/4" or 11/2" offset insert kits
• Kit contains three 5/16"-18 x 11/2" sockethead cap screws, three 5/16" lock washers, three 5/8" o.d. spacers and locking plate
• Made in the U.S.A.

BELT DRIVES LTD. Offset Front Pulley Spacer Insert, size 1 1/2"

• Used to offset motor pulley for belt alignment
• Spacer inserts are available in eight widths from 1/4" to 2" and include a motor sprocket nut and mounting screws
• Pulleys are for 3" systems and accept any of the spacer inserts listed
• Pulleys and spacer inserts sold separately
• Made in the U.S.A.

BELT DRIVES LTD. Offset Front Pulley Spacer Insert, size 2"

• Used to offset motor pulley for belt alignment
• Spacer inserts are available in eight widths from 1/4" to 2" and include a motor sprocket nut and mounting screws
• Pulleys are for 3" systems and accept any of the spacer inserts listed
• Pulleys and spacer inserts sold separately
• Made in the U.S.A.