All

BEL-RAY 4-Liter V-Twin Semi-Synthetic 20W50 Engine Oil

• Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing
• Flash point is higher than standard petroleum-based oils which limits oil burn-off to lower oil consumption and keeps hot engines protected
• Features high-polarity synthetic-base oils, which provide minimum friction for increased power
• Removes deposits, dissipates heat and lowers friction to reduce engine operating temperature
• Offers many of the benefits of Bel-Ray V-Twin Synthetic Motor Oil but at a more economical price
• 1 liter bottle, 12 per case, 4 liter bottle, four per case; sold each

BEL-RAY Big Twin Transmission Oil, made in the usa, Each, 85W-140

• Superior lubricity minimizes sliding friction for maximum power
• Special lubricity additives reduce sliding friction for exceptionally smooth and quiet shifting
• Resists viscosity breakdown caused by gear shearing action
• Exclusive Bel-Ray extreme-pressure chemistry protects gear components from the destructive effects of shock loading
• Superior oxidation protection prevents thermal oil degradation for extended performance
• High-temperature protection, high-viscosity-index base oils maintain film strength over a wide temperature range
• Distinctive red color makes transmission leaks easy to detect
• 1 liter bottle, 12 per case; sold each

BEL-RAY Primary Chaincase Lube, made in the usa, Each, Liter

• Specially formulated high-quality lubricant for the primary chaincase for all Big Twin models
• Ideally suited to stand up to high pressures
• Helps ensure long service life for the primary chain
• Works to prevent clutch slipping and chatter for a consistent engagement, including in hot stop-and-go traffic
• Features a distinctive red color to help detect leaks
• 1 liter bottle, 12 per case; sold each

BEL-RAY Sport Transmission Fluid, made in the usa, Each, Liter

• Specially formulated high-quality lubricant for transmissions of Sportster models
• Resists oxidation and viscosity breakdown for extended performance
• Works to prevent clutch slipping and chatter for consistent engagement
• Features a distinctive red color to help detect leaks
• 1 liter bottle, 12 per case; sold each

BEL-RAY V-Twin Motor Oil, 4-Liter

• Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing
• Low-volatility base oils to minimize consumption
• Cleans deposits and reduces sludge and varnishes
• Lowers temperatures and minimizes deposit formation for cleaner and cooler running engine
• Bel-Ray's additive chemistry, high-viscosity index, low-volatility petroleum base oils and oxidation stability provide added wear protection for increased engine reliability
• Provides excellent low-cost lubrication performance and engine protection
• 1 liter bottle, 12 per case, 4 liter bottle, four per case; sold each

BEL-RAY V-Twin Motor Oil, Liter

• Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing
• Low-volatility base oils to minimize consumption
• Cleans deposits and reduces sludge and varnishes
• Lowers temperatures and minimizes deposit formation for cleaner and cooler running engine
• Bel-Ray's additive chemistry, high-viscosity index, low-volatility petroleum base oils and oxidation stability provide added wear protection for increased engine reliability
• Provides excellent low-cost lubrication performance and engine protection
• 1 liter bottle, 12 per case, 4 liter bottle, four per case; sold each

Belt Dr Kit Primary 14Mm Pol St 90/06,3-3/8" Open W/Clutch Billet W/Brg Support Tf-2000
The 14mm by 3 3/8 belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate. Kit is the complete drive with outboard bearing supports. The outboard bearing support has one bearing to support the transmission mainshaft. The outboard support plate is reversible. The back side is channeled for another distinct look, but just the flat side will be polished.

eatures:

• 14mm x 85mm (3 3/8) wide belt, the same belt as used on top fuel Harley-Davidson^® race bikes
• Kevlar^™ clutch has nine 6 3/8 diameter frictions & eleven steels for ultimate power transfer
• Speciallly manufactured pressure plate uses up to 9 springs for infinite clutch pressure control
• Hub is manufactured from 7075 aluminum and hard anodized for maximum strength and longevity
• 30-46 tooth combo provides 1.53:1 drive ratio

Belt Drives Ltd.
Polished Kit with Outboard Bearing Support (Top uel Street Drive)
Fits Softail 1990/2006

Belt Dr Part Quiet Cl Friction BDL Sys Round Dog Dr Rr Pulley 7 Kevlar/Alum Disc Ercp-100
Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates incorporate a round dog drive to the outer clutch basket. The friction plates are bonded to aluminum for light weight. See below for availability of plate material. Fits all Round Dog type BDL belt drives.
Clutch friction Plate Kit
Includes: 7 Kevlar® friction plates (.152 thick)

Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates incorporate a round dog drive to the outer clutch basket. The friction plates are bonded to aluminum for light weight. See below for availability of plate material. Fits all Round Dog type BDL Belt Drives

ECRS-100

Belt Drives Ltd.
Clutch Steel Plate Kit
Includes: 7 Splined Steel Plates (.060" thick)
By: BELT DRIVES LTD

Belt Dr Part,Fr Pulley 3" 8Mm Bt 55/84 Use W/77022,#77024 & #77011 Open Pri Belt Dr..47-S3

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.Belt Drives Ltd.
3 Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1955/1984 with splined engine sprocket shaft fits 77011, 77022 & 77024

Belt Dr Pri Kit,8Mm Ks Only Bt 1955/E1984,3" Open Unit W/Quiet Clutch Ev-72-47S

• 3 wide open belt drives
• BDL pulleys are machined from a 356-T6 aluminum aircraft alloy and hard anodized
• A fiberglass reinforced belt is used in these kits
• Includes BDL's Quiet Clutch
• The inner clutch hub uses a 40mm double row bearing for added strength compared to stock which is 35mm
• The precision machined pressure plate (polished aluminum) uses 9 springs and shoulder bolts to insure even spring pressure
• Includes instructions

Note: Requires part 73200 stock type clutch hub nut (not included in the kit)

Note: Due to numerous variables of misalignment and improper tension upon installation, there is no warranty on belts.Belt Drives Ltd.
1.53:1 Drive Ratio Belt Drive Kit
47-72 pulley tooth highway combo
Replacement belt 77522
Fits Big Twin 1955/Early 1984 with rear chain drive

Belt Dr Pri Kit,8Mm Ks Only Bt 1955/E1984,3" Open Unit W/Quiet Clutch Ev-76-47S

• 3 wide open belt drives
• BDL pulleys are machined from a 356-T6 aluminum aircraft alloy and hard anodized
• A fiberglass reinforced belt is used in these kits
• Includes BDL's Quiet Clutch
• The inner clutch hub uses a 40mm double row bearing for added strength compared to stock which is 35mm
• The precision machined pressure plate (polished aluminum) uses 9 springs and shoulder bolts to insure even spring pressure
• Includes instructions

Note: Requires part 73200 stock type clutch hub nut (not included in the kit)

Note: Due to numerous variables of misalignment and improper tension upon installation, there is no warranty on belts.Belt Drives Ltd.
1.61:1 Drive Ratio Belt Drive Kit
47-76 pulley tooth power combo
Replacement belt 77504
Fits Big Twin 1955/Early 1984 with rear chain drive

Belt Drive Belt Guide Plate Front Inside Of Pulley 8 & 11 Mm Belt Drives Anodized Steel
Stamped steel and anodized. It contours to the front pulleys and helps guide the belt as well as protecting the alternator from belt rub. Used on all of our 1 1/2 8mm and 11mm front pulleys except early tapered shaft.Guide fits inside of pulley.

Belt Drive Belt Guide Plate Front Outside Of Pulley 8 & 11 Mm Belt Drives Anodized Steel
Stamped steel and anodized. It contours to the front pulleys and helps guide the belt as well as protecting the alternator from belt rub. Used on all of our 1 1/2 8mm and 11mm front pulleys except early tapered shaft.Guide fits outside of pulley. This guide is standard with all our kits. Guide assures 100% belt to pulley contact.

Belt Drive Fr Pulley 8Mm 45T Fits #77005,#77008 & #77023 1-5/8"Wide Closed Primary 45Ev
Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited. Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stressproof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized. Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required. Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. or replacement parts, see the drive train section for clutch or starter ring gear.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.Belt Drives Ltd.
Replacement front pulley, 45 tooth 1 ⁵/₈ wide
Includes inner and outer belt guides Fits 77005, 77008 & 77023

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 45 tooth, 1 5/8 wide 1 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1/2"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley kit. 45 tooth, 1 5/8 wide 1/2 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,1/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 45 tooth, 1 5/8 wide. 1/4 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,3/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 45 tooth, 1 5/8 wide 3/4 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley kit. 47 tooth, 3 wide. 1 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1-1/2"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley Kit. 1 1/2 offset pulley kit 47 tooth 3 wide.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1-1/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley Kit. 1 1/4 offset pulley kit 47 tooth 3 wide.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1-3/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complet pulley kit. 3 wide, 47 tooth. 1 3/4 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1/2"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley kit. 47 tooth, 3 wide 1/2 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 47 tooth, 3 wide 1/4 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,3/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley Kit. 47 tooth, 3 wide. 3/4 offset.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-1/2"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley Kit. 45 tooth 1 5/8 wide 1 1/2 offset pulley kit.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-1/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley Kit. 45 tooth 1 5/8 wide 1 1/4 offset pulley kit.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives,8 Mm 45T,1-5/8"Wide,1-3/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 1 5/8 wide, 45 tooth. 1 3/4 offset.

Belt Drive Idler Bearing Kit Bt 4 Spd 65/L...Fits To Inner Primary To Adjust Belt Tension
This high quality Primary Belt Drive Idler Bearing Kit is used to adjust the belt tension. Small adjustable serrated plate attaches to the large solid mounted stock plate within the cast inner primary. The rollers bearings are permanently sealed for zero maintenance. Fits Big Twin 4 speed 1965/Later with 1 1/2 primary belt drive.Note: Not intended for use with polychain belts that have ribs on the outside.

Belt Drive Kit Primary 2"X8Mm Bt 55/E84 4Spd Ks Open Pri Adj Trn Splined Eng Sft..76-47-2S

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
8mm Belt Drive
Fits Big Twin 4 speed 1955/Early 1984
2 Kickstart Models
47T-76T Pulley Combo

Belt Drive Kit Primary 3"X8Mm Bt 55/E84 4Spd Ks Open Pri Adj Trn Splined Eng Sft 76-47-3S

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
8mm Belt Drive
Fits Big Twin 4 speed 1955/Early 1984
3 Kickstart Model
47T-76T Pulley Combo

Belt Drive Kit, Primary 8Mm Dyna 91/05,3"Open Belt Drive Kit Polished Bdl# Evob-122S
These kits are truly a custom builders delight. Manufactured by Belt Drives Limited (BDL) for unsurpassed quality in the motorcycle industry. All kits include BDL's quiet clutch with Kevlar fiber plates that virtually eliminates the clutch rattle that is normally associated with open belt drives. Kits are available with your choice of clutch spring, coil type or diaphragm type as listed. Our one piece, CNC machined billet aluminum motor plate features a double row sealed bearing for maximum strength on the mainshaft. The starter ring gear pocket is recessed into the plate and the starter housing is designed to cover most of the open area of the gear. To further enhance the appearance, a polished aluminum cover is included that fits behind the front pulley and camouflages the stator. A side guard is held in place with hex stand-offs and button head allens. We also include a special starter gear. The 4 speed kit is designed for use with ratchet top transmission, 1991/Later starter motor and a 1979/Later 4 speed clutch release arm 44208. Simple modifications will have to be made to the clutch release arm and a small cut out of the oil tank bracket will be needed for starter motor clearance on X models. Includes instructions. Softail kits include a two piece front pulley consisting of a 3 wide pulley and a splined steel insert. By replacing the included insert with a longer one, found in the drive train section, along with the corresponding alternator mount and offset transmission mounting plate, you can install these belt drive kits on frames designed for wide tire applications. See the drive train section for custom belt guards.Belt Drives Ltd.
Polished Belt Drive Kit without Oil ilter
Fits Dyna models 1991/2005 with forward controls
47-72 tooth combination, coil spring clutchNote: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited.
Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stress proof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 inch which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized. Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required. Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.

1-5/8" wide Belt Dive Kit with Clutch

Fits FLT & FXR models Late 1985/1989 with taper clutch hub and rear belt drive, 48-68 tooth combo

Belt Drive Kit,Primary 11Mm Bt 55/64 Ks Closed Primary 1-1/2" No Idler. Bdl 47-31Sk-2

• These belt drives have hard anodized aluminum pulleys which provide superior wear characteristics, as well as hardened clutch dogs and chrome-moly carbonized steel bearing surfaces
• Belt drives transfer power over 10% more efficiently than chains and drastically reduce noise and vibration
• 2 and 3 open kits include a solution clutch hub bearing kit

Note: Due to numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts Belt Drives Ltd.
11mm Belt Drive
Fits Big Twin 4 speed 1955/1964
Kickstart Model
31T-47T Pulley Combo