All

DRAG SPECIALTIES Wheel Bearing Kit, Front, specific application, Buell 03-09

• 00-15 kits are premium EMQ quality featuring rubber seals that keep water out and improve grease retention
• 84-99 kits have tapered bearings and seals
• PART #0215-0962 includes one OEM #9276A bearing and one OEM #9252 bearing with ABS encoder; PART #0215-0963 includes three OEM #9276A bearings and one OEM #9252 bearing with encoder; PART #0215-0964 includes one OEM #9252 bearing with OEM encoder
• Sold in kits containing bearings/seals for one wheel

DRAG SPECIALTIES Wheel Bearing Kit, Harley 00-07 FX 00-07 FL 00 - 07 XL

• 00-15 kits are premium EMQ quality featuring rubber seals that keep water out and improve grease retention
• 84-99 kits have tapered bearings and seals
• PART #0215-0962 includes one OEM #9276A bearing and one OEM #9252 bearing with ABS encoder; PART #0215-0963 includes three OEM #9276A bearings and one OEM #9252 bearing with encoder; PART #0215-0964 includes one OEM #9252 bearing with OEM encoder
• Sold in kits containing bearings/seals for one wheel

DRAG SPECIALTIES Wheel Bearing Kit, made in the usa, Front, Rear, 25mm I.D., specific application, Harley 07-15 FX 07-15 FL 08 - 15 XL 08 - 15 VR

• 00-15 kits are premium EMQ quality featuring rubber seals that keep water out and improve grease retention
• 84-99 kits have tapered bearings and seals
• PART #0215-0962 includes one OEM #9276A bearing and one OEM #9252 bearing with ABS encoder; PART #0215-0963 includes three OEM #9276A bearings and one OEM #9252 bearing with encoder; PART #0215-0964 includes one OEM #9252 bearing with OEM encoder
• Sold in kits containing bearings/seals for one wheel

DRAG SPECIALTIES Wheel Bearing Kit, Not for VRSC models w/ 240mm tire, Harley 04-07 FX 00-07 FL 05 - 07 XL 02 - 07 VR

• 00-15 kits are premium EMQ quality featuring rubber seals that keep water out and improve grease retention
• 84-99 kits have tapered bearings and seals
• PART #0215-0962 includes one OEM #9276A bearing and one OEM #9252 bearing with ABS encoder; PART #0215-0963 includes three OEM #9276A bearings and one OEM #9252 bearing with encoder; PART #0215-0964 includes one OEM #9252 bearing with OEM encoder
• Sold in kits containing bearings/seals for one wheel

DRAG SPECIALTIES Wheel Bearing Kit, Rear, 25mm I.D., specific application, Harley 09-15 FL

• 00-15 kits are premium EMQ quality featuring rubber seals that keep water out and improve grease retention
• 84-99 kits have tapered bearings and seals
• PART #0215-0962 includes one OEM #9276A bearing and one OEM #9252 bearing with ABS encoder; PART #0215-0963 includes three OEM #9276A bearings and one OEM #9252 bearing with encoder; PART #0215-0964 includes one OEM #9252 bearing with OEM encoder
• Sold in kits containing bearings/seals for one wheel

DRAG SPECIALTIES Wheel Bearing Kit, Rear, Buell 03-09

• 00-15 kits are premium EMQ quality featuring rubber seals that keep water out and improve grease retention
• 84-99 kits have tapered bearings and seals
• PART #0215-0962 includes one OEM #9276A bearing and one OEM #9252 bearing with ABS encoder; PART #0215-0963 includes three OEM #9276A bearings and one OEM #9252 bearing with encoder; PART #0215-0964 includes one OEM #9252 bearing with OEM encoder
• Sold in kits containing bearings/seals for one wheel

DRAG SPECIALTIES Wheel Bearing Kit, Rear, specific application, Buell 00-09

• 00-15 kits are premium EMQ quality featuring rubber seals that keep water out and improve grease retention
• 84-99 kits have tapered bearings and seals
• PART #0215-0962 includes one OEM #9276A bearing and one OEM #9252 bearing with ABS encoder; PART #0215-0963 includes three OEM #9276A bearings and one OEM #9252 bearing with encoder; PART #0215-0964 includes one OEM #9252 bearing with OEM encoder
• Sold in kits containing bearings/seals for one wheel

DRAG SPECIALTIES Wrinkle Black Derby Cover, Harley 94 - 03 XL

• Die-cast construction with a domed design
• Available in multiple finishes
• Includes mounting hardware

DRAG SPECIALTIES Wrinkle Black Domed Derby Cover, Harley 99-16 FX 99-16 FL

• Die-cast construction with a domed design
• Available in multiple finishes
• Includes mounting hardware

DRAG SPECIALTIES Wrinkle Black Points Cover, Harley 71-99 FX 70-99 FL 71 - 16 XL

• Beautiful radiused chrome points cover matches our brake caliper inserts and fork tube cap covers
• Comes complete with screws and gasket

DRAG SPECIALTIES Wrinkle Black Vented Pop-Up Gas Cap, Harley 82-96 FX 82-96 FL 82 - 96 XL

• Billet aluminum construction that is available in a polished chrome or black finish
• Fit is nearly flush when closed; opens easily with just a quarter-turn of the center of cap
• Styles available to fit early and late-model OEM gas tanks with screw-in style gas caps
• Sold each

Drag Style Handlebar,Black 1982/Later*,30" Wide,1" Dia Dimpled

• High quality drag bars
• 30 wide, 1 diameter
• See below for availability of finish and type

V-FACTOR
Black Drag Bar, Dimpled
Fits most applications

Drain oil patches are gold red and black. Patch can be ironed or stitched on. Sold as a pair. NOTE: When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Drain Plug & Washer Oe Style Bt 4 Spd All Yrs 1/2-13 Cp Rpls Hd 707 & 62702-52
Colony
Chrome Plated Non-Magnetic Hex Head Drain Plug, 1/2-13 thread, & Brass Washer
Replaces HD# 707 & 62702-52

Drain Plug,Magnetic W/Washer Flt Mdls 93/00 Dyna 91/00 1/2-20 Rpls Hd 60348-65A,704
Chrome plated drain plugs to fit all necessary thread sizesV-FACTOR
Corrosion Resistant Plate Magnetic Drain Plug, 1/2-20 thread, & Nylon Washer
Fits Dyna 1991/2000
Replaces HD# 704 & 60348-65B
(Imported)

Drilled Brake Disc,Polished Ss Bt & Spt 84/L* Front,11.5"Od Rpls Hd 44136-92 & 44156-00

• DOT Approved
• Includes adapter ring that reduces I.D. to 2 for 1984/1999 models
• Made from 420 stainless steel with a low carbon content
• Drilled for lightweight, water dispersal & improved heat dissipation
• See below for availability of finishes
• Precision ground for maximum flatness
• Mounting hardware found in the wheel section

Note: Always install new brake pads with new brake discs to ensure maximum brake pad and disc life. See the wheel section for brake padsV-FACTOR
Front Brake Disc
Stainless Steel with Polished Finish
11 ¹/₂ O.D., 2.220 I.D. disc diamters
Mount hole style & bolt size: ⁵/₁₆
Fits Big Twin & Sportster 1984/Later with single or dual disc
Replaces HD# 44136-92 & 44156-00, (Imported)

Drilled Brake Disc,Satin Ss Bt & Spt 84/L* Front,11.5"Od Rpls Hd 44136-92 & 44156-00

• DOT Approved
• Includes adapter ring that reduces I.D. to 2 for 1984/1999 models
• Made from 420 stainless steel with a low carbon content
• Drilled for lightweight, water dispersal & improved heat dissipation
• See below for availability of finishes
• Precision ground for maximum flatness
• Mounting hardware found in the wheel section

Note: Always install new brake pads with new brake discs to ensure maximum brake pad and disc life. See the wheel section for brake padsV-FACTOR
Front Brake Disc
Stainless Steel with Satin Finish
11 ¹/₂ O.D., 2.220 I.D. disc diamters
Mount hole style & bolt size: ⁵/₁₆
Fits Big Twin & Sportster 1984/Later with single or dual disc
Replaces HD# 44136-92 & 44156-00, (Imported)

Drilled Brake Disc,Satin Ss Bt 81/L* Rear (Ex Flt) Spt 79/L* Rear,11.5"Od

• DOT Approved
• Includes adapter ring that reduces I.D. to 2 for 1984/1999 models
• Made from 420 stainless steel with a low carbon content
• Drilled for lightweight, water dispersal & improved heat dissipation
• See below for availability of finishes
• Precision ground for maximum flatness
• Mounting hardware found in the wheel section

Note: Always install new brake pads with new brake discs to ensure maximum brake pad and disc life. See the wheel section for brake padsV-FACTOR
Rear Brake Disc
Stainless Steel with Satin Finish
11 ¹/₂ O.D., 2.220 I.D. disc diamters
Mount hole style & bolt size: ³/₈
Fits Big Twin 1981/Later (except FLT models) & Sportster 1979/Later
Replaces HD# 41789-92 & 41797-00
(Imported)

Drive Belt Primary 14Mm 85T Bt 90/L W/30T & 46T Pulleys 3-3/8"Wide Bdl 14-85
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Belt Drives Ltd.
Pulley teeth combo 24 & 38, without idler 30 & 46
Fits 1990/Later Big Twin (Top uel Style)Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt Trn Pulley Kit 28T All Sportster Models 1991/2003 W/Seal,Spacer,Mtg Hrdw Tps-28

• ¹/₃ of the weight of the OEM steel pulley (Lightening rotating parts increases wheel horsepower)
• Made from solid round 7075 aluminum for strength
• Completely hard anodized for longevity
• Includes a pulley nut, nut lock, lock screws and an updated seal and seal spacer

Belt Drives Ltd.
Hard Anodized 28 Tooth Pulley Kit, for more low end power
Fits Sportster models 1991/2003

Drive Belt,Primary 11Mm 92T Big Twin 5 Spd 1-1/2"Wide 92T Open/Closed Primary...Bdl-5S11
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 11mm Replacement part. 1980/1984 5 speed closed primary new style belt drive. 1 1/2 wide. Pulley teeth combo 31 & 47. 92 belt teeth. Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 11Mm 99T Big Twin 4 Spd 1-1/2"Wide 99T Open/Closed Primary...Mfg.1185
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 11mm Replacement part. 1937/1984 open or closed primary kick or electric start new style belt drive. 1 1/2, Pulley teeth combo 31 & 47- 99 teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 1-1/2" Bt 4 Spd W/Rr Chain & 45/68 T Combo Enclosed Pri Fits#77028
Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited. Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stressproof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized. Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required. Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. or replacement parts, see the drive train section for clutch or starter ring gear.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.Belt Drives Ltd.
Replacement 1 ¹/₂ wide Kevlar Reinforced Belt
Fits 45-68 tooth combination - 138 teeth
Fits Big Twin 4 speed 1965/1984 with electric start

Drive Belt,Primary 8Mm 130T Bt L85/L* 5 Spd 77029/77031 130T 1-5/8" Belt Bdl-130K
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Belt Drives Ltd.
Replacement 1 ⁵/₈ wide Kevlar Reinforced Belt
Fits 48-68 tooth combination - 130 teeth
Fits Big Twin 5 speed Late 1985/Later with electric startNote: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 132T Bt 37/L*(Ex 65/78 Es) 1-1/2" Wide 132T Closed Pri...30853Be
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 8mm Replacement part. 1937/1964 with open or closed primary and 1979/1984 4 speed with die cast inner primary, kick or electric start. (Bullseye belt +.020 longer than 77501). 1 1/2 wide. Pulley teeth combo 41 & 61, 39 & 62, 40 & 62.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 132T Bt L85/L* 5 Spd 132T 1-3/4" Belt......Bdl-132
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Late 1985/Later 5 speed, electric start. 1 3/4 wide. Pulley teeth combo 48 & 72. 132 Belt Teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt.
Belt Drives Ltd.
Replacement 1 ⁵/₈" wide Kevlar Reinforced Belt
Fits 45-68 tooth combination - 138 teeth
Fits Big Twin 5 speed Late 1985/Later with electric start

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 141T Bt L85/L* 5 Spd 141T 1-3/4" Belt.......Bdl-141
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. Late 1985/Later 5 speed, electric start. 1 3/4 wide. Pulley teeth combo 47 & 72. 141 belt teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 141T Bt L85/L* 5 Spd 47/72T Pulley Combo 141T 3" Belt...Bdl-141-3
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 8mm Replacement part. 1955/Later 4 or 5 speed kick or electric start. 3 wide. Pulley teeth combo 47 & 72. 141 belt teeth. Fits 77032, 77201, 77025, 77040 & 77039Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Drive Belt,Primary 8Mm 144T Big Twin 37/L 2"Wide Belt 144T Open Primary.......Mfg 37144-2
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt. 8mm Replacement part. 1937/1984 4 speed with open primary kickstart. 2 wide. Pulley teeth combo 47 & 76. 144 belt teeth.Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.