Best selling products

Cometic
Generator Mounting Gasket
Fits 61ci & 74ci OHV, K Model, Sportster & 45ci, all years
Package of 5
Replaces HD# 30143-30 & 30143-58

• Designed to provide a minimalist Chopper look by eliminating the external cable and running a singe cable inside the handlebar.
• This is a pull type throttle, and is manufactured with needle bearing and ball bearing operation.
• A built in spring mechanism to return the throttle.
• For use with 1" I.D. handlebars.
• Must use 1" handlebar grips.
• Instructions included.

Fits Single Cable FX & Sportster 1974/1980, FLT 1975/1980 (1/4-20 Throttle Cable Thread Size)
Replaces HD# 56395-74 & 56393-74A

V-Factor

Studs measure 5/16-18 x 1" long

T plates measure 1 1/2" long x 5/8" wide

Includes two T bolts and two nuts with integrated lock washers

High quality hardware kits by Gardner-Westcott are available in Straight Knurled Allen head and include all hardware as shown.

Big Twin with Rear Pulley or Rear Sprocket

• Used for rear drive train alignment
• CNC machined from billet aluminum with a polished circumference

For use with rotors and Pulleys with 2-1/4" ID

PRIMARY DR GASKET & SEAL KIT TCFL MODELS 1999/2006

FOAMET MATERIAL

• 1 1/4" diameter for big look, 1" at riser mount
• Available in black
• 6" pull back
• Drilled for internal wiring

V-FACTOR
14" Black Jackknife Handlebars
Fits 1982/Later models, including Fly-By-Wire
34" Total Width, 15" Center Width

Jims fork cap installation tool 5821 for use on 49mm forks allows the installation of the fork tube caps on the motorcycle without removing other parts 2014-UP FLT 2006-2017 FXD

• Includes adapter ring that reduces I.D. to 2" for 1984/1999 models
• Precision ground for maximum flatness

V-Factor
Polished Front Disc, 11 1/2" O.D.
Fits Big Twin & Sportster 1984/2007
Replaces HD# 44136-92 & 44156-00

Ape Hanger Handlebar,12" Rise 82/L*,34" Wide,9" Center Width 8-1/4" Pullback W/Crimp Cp

• 1 O.D. steel handlebars designed to be used with external throttle cables
• See below for availability of bar year style
• Pre-1982 type bars are smooth the entire length and are designed for 1972/1981 style switch housings
• The 1982/Later type is dimpled for the 1982/Later style switch housings and are drilled for wire harness clips
• Knurled for risers mounted on 3 ¹/₂ centers

• V-FACTOR
• Chrome Plated
• Rise: 12
• Total Width: 34
• Center Width: 9
• Pullback: 8 ¹/₄
• 1982/Later
• (Imported)

Sprocket Part,Trn Spkt Nut Sportster 1971/Early 1984 Replaces Hd 35047-71..Mfg.7179
Transmission sprocket nut 1971/Early 1984.

Shifter Part,Finger Roller Big Twin 4 Spd 1939/Early 1979 Replaces Hd 34168-39 Use Two
Shifter finger roller. 1939/Early 1979. Sold in packages of 10

Transmission Gear,Ms 5Th Flt Fxr 91/94 St Dyna 91/95 Rpls Hd 35029-91A...Mfg.296591
or Transmission tools see the general merchandise section.

Note: These gears are low contact gears (LCG) & will not work in conjunction with the OEM H-D high contact gear (HCG) found in some 1994/1995 and all 1996/Later models. So if you replace a LCG mainshaft gear in a 1994/Later HCG transmission you must also buy a matching LCG gear on the countershaft found in the drive train section.Andrews
Gear 32T Mainshaft 5th
Fits FLT, FXR 1991/1994, Softail, Dyna 1991/1995
Replaces HD# 35029-91A

Clutch Cable, Black Out Hd# 38665-00 Motion Pro# 06-2327
its Big Twin 5 speed models with OE type hand lever and clutch releasing mechanism. Fits Evolution Sportster models 1986/Later with OE type hand lever assembly and ball and ramp clutch actuator. See the helpful hint under clutch cables for cable description and housing construction.

Note: Cables are interchangeable. Any length cable listed can be used on any model Sportster 1986/Later that has had the handlebar height altered or the frame stretched requiring a different length cable.Motion Pro Blackout
-4 length longitudinally wound clutch cable
Fits LSTC, LST, & XSTC 1996/1999
LSTN & LSTN-1 2006
LSTS 1997/1999
XST 1999
XSTB & XSTD 2000/2006
XSTD-1 2001/2006
Replaces HD# 38665-00
(Imported)

Throttle Cable, Stainless 43 Bt 96/Later Rpls. Hd 56327-96
its Big Twin 1996/Later with unthreaded OE type dual throttle cables and CV carburetor.V-FACTOR 90° Braided Stainless Throttle Cable
43 Length
Fits FLHT & FLTR models 1996/Later
Replaces HD# 56327-96
(Imported)

Clutch Part,Shoulder Bolt Fits Bdl Chain Dr Competitor Cl & Tf Set Of 9 Bdl Cdsb-100
Designed to upgrade your entire clutch assembly. Belt Drives Limited (BDL) has added their Competitor Clutch to their newly engineered Clutch Basket. With Fits Kevlar clutch plates this heavy duty assembly offers approximately 60% more surface area than OE. These feature a large 35mm hub bearing and 9 shoulder bolts and springs for accurate spring tension. Baskets include a 36 tooth sprocket. If you have the power...we have the clutch. Belt Drives Ltd.
Replacement nine shoulder bolts for clutch springs for 73320 & 73402

Rear Axle For Custom Use 1" Diameter, 13" Long Chrome Steel

• Wide assortment for builders who are looking for a specific size
• See below for availability of diamters
• 1 diamter axle includes castle nut and pin
• Chrome plated 4130 cold roll steel
• See product image for description of lengths

V-FACTOR
Chrome Plated 13 Axle, 1 Diameter(Imported)

Rear Axle For Custom Use 3/4" Diameter, 15.5" Long Chrome Steel

• Wide assortment for builders who are looking for a specific size
• See below for availability of diamters
• 1 diamter axle includes castle nut and pin
• Chrome plated 4130 cold roll steel
• See product image for description of lengths

V-FACTOR
Chrome Plated 15 1/2 Axle, 3/4 Diameter(Imported)

Rear Axle For Custom Use 3/4" Diameter, 13" Long Chrome Steel

• Wide assortment for builders who are looking for a specific size
• See below for availability of diamters
• 1 diamter axle includes castle nut and pin
• Chrome plated 4130 cold roll steel
• See product image for description of lengths

V-FACTOR
Chrome Plated Axle
A Length: 13, B Length: 11 ³/₄
³/₄ Diameter
(Imported)

Slash Cut Drag Pipes,2" Sportster 2004/2013 40" Long,Channel Mounting

• Top quality drag pipes for models listed
• Chrome plated or black primered that is suitable for heat wrapping. Black primer is a protectant for rust, not a ceramic heat coating
• Available in 1 3/4 or 2 diameter in 40 lengths
• Slash cut tips for a performance look
• Hidden channels for a clean look

V-FACTOR
2 Chrome Plated Set
Fits Sportster 2004/2013

Seat Mount Part,Through Pin Fits #27920 Quick Release Seat Pin .. Chrome Plated

• Make seat removal quick and easy with this Quick Release Screw and Pin
• Simply replace the original hold down screw with this quick release post, reinstall the seat and slide the pin through the post
• The slide through pin is held in place by a spring loaded ball stop detent and will not vibrate loose
• This little item is a time saver for those who service their machine or have the oil filler located under the seat

V-FACTOR
Chrome Plated Replacement Through Pin

Rear Axle Adjuster Spacer,Cp Softail Models 2008/Later* Rpls Hd 41694-08

• Machined to exact tolerances for correctly aligning the rear wheel
• Also fits aftermarket frames

V-FACTOR
Chrome Plated Spacer
Fits Softail models 2008/Later
Replaces HD# 41694-08, (Imported)

Instrument Panel Cover,Black ST 2000-Later with Rubber Trim

• Great replacement for the OEM Cover
• Includes tank-to-dash rubber trim strips

V-FACTOR
Black Cover
Fits all Softail models 2000/Later (except Deuce)

Great replacement for the OEM Cover
Includes tank-to-dash rubber trim strips
Black Cover
Fits all Softail models 2000-Later (except Deuce)

OEM: 71250-00

Shift Arm & End Cap W/Hrdw Cp Replacement Parts Fits #45889 And #45890 Forward Controls

• CNC machined billet aluminum
• Rubber band inserts in footrests, brake pedal & shifter peg
• Ball milled master cylinder lid
• Includes flush mount chrome mounting hardware

V-FACTOR
Replacement Shift Arm & End Cap with Hardware, (Imported)

Replacement Footrest Rubbers Fits Footrest In #45889 #45890 Kits & #24019, Kit For 2 Pegs

• CNC machined billet aluminum
• Rubber band inserts in footrests, brake pedal & shifter peg
• Ball milled master cylinder lid
• Includes flush mount chrome mounting hardware

V-FACTOR
Replacement ootrest Rubbers (Kit for 2 Pegs), (Imported)

Clutch Release Piston Seal Kit Replacement For #70555?? Hydraulic Trans End Cover

• Chrome Plated
• Designed to convert your cable operated clutch to a smooth action hydraulic-type clutch
• The hard anodized piston can withstand years of constant punishment and be used with a 9/16 or a 5/8 bore master cylinder (see Control Section for custom master cylinder)
• The 10mm banjo bolt includes sealing washers and is located on the bottom of the cover for a clean look (see Control Section for custom length hyadraulic lines and fittings)
• A top mounted bleeder valve helps to simplify installation
• CNC machined from 6061-T6 billet aluminum for strength
• Includes custom fill plug with dip stick and mounting hardware

Replacement Piston Seal Kit

Th Cable, Black Vinyl 31" . Rpls Hd #56436-00

• Black vinyl housing
• Premium chrome fittingsMotion Pro
  Black Vinyl Throttle Cable
  Fits XLH 1200C 2000/2001
  Replaces HD# 56436-00