Best selling products

Handlebar Switch Housing Lh/Rh Bt Spt 82/95 (Ex Radio Control Rpls Hd 71563-82 71568-82 Cp
V-FACTOR
Chrome Plated Right & Left Side Switch Housing Assembly
Includes button head mounting hardware with allen wrench and right hand assembly includes the thumb screw throttle lock assembly
Fits Big Twin & Sportster 1982/1995 (except models with radio controls)
(Imported)

Steel License Plate Brkt,Black Touring Models 2009/Later* Rpls Hd 69380-09Bhp

• High quality steel license backing plate in finishes as listed
• Replace the stock factory plastic part that is prone to cracking

V-FACTOR
Black Steel Bracket
Fits Touring Models 2009/Later
Replaces HD# 69380-09BHP

Curved License Plate Frame,Blk Touring Models 2010/Later* Rpls Hd 67900058

• These curved license plate frames are shaped to hug the contour of the rear fenders of Touring models
• Replaces the OEM frame and requires no re-wiring or drilling

V-FACTOR
Black Finish
Fits Touring models 2010/Later
Replaces HD# 67900058

Headlight Bracket,Chrome Plt V-Rod 02/L* & Custom App Rpls Hd 68884-01

• Complete headlight assembly manufactured from aluminum
• Black housing is manufactured from high-impact black plastic
• Includes an H11 low beam & H9 high beam bulbs
• Also available is a black or chrome headlight bracket to complete the job
• Mix the finishes for a unique custom look

V-FACTOR
Headlight Bracket with Chrome Finish
Fits V-Rod 2002/Later & custom applications
Replaces HD# 68884-01

Headlight Connector W/12"Wire Fit All 6V& 12V Headlights W/3 Pin Spade Terminals W/12" Wire

• Individual parts for Headlight Housing assembly

V-FACTOR
Replacement Headlight Connector with 12 wires
Fits L & L 4 speed 1960/1984, FXRT 1982/Later, FLHT 1983/Later, FLHS 1987/1993
Replaces HD# 67753-60

Ele Terminal Junction Block Custom Use,30Amp,4 Brass Links W/Screw,2-3/4" Mt Ctr Mc-Jb2

• Provides convenient junction point for ³/₁₆ I.D. terminated wires
• Rated at 30 amp maximum
• Easy to hide size (3 ¹/₄ long x 1 ¹/₄ wide x ³/₄ tall)
• Thermal plastic construction for strength with anti-corrosion coated brass links

Standard Motor Products
Junction block
(Imported)

Circuit Breaker,15 Amp St,Dyna 96/99,Flt 94/95 Plug In Self Resetting Hd 74587-94

• These zinc plated self resetting circuit breakers are available in amp ratings
• Use the OEM number to assist for proper application

Standard Motor Products
Plug in type, 15 amp
Fits Big Twin & Sportster models 1973/Later
Replaces HD# 74587-94

Circuit Breaker,30 Amp Big Twin & Sportster 73/Later Replaces Hd 74599-77B

• These zinc plated self resetting circuit breakers are available in amp ratings
• Use the OEM number to assist for proper application

HARDWARE
Stud type, 30 amp
Fits Big Twin & Sportster models 1973/Later
Replaces HD# 74599-77B

Circuit Breaker,15 Amp Big Twin & Sportster 73/Later Replaces Hd 74589-73

• These zinc plated self resetting circuit breakers are available in amp ratings
• Use the OEM number to assist for proper application

HARDWARE
Stud type, 15 amp
Fits Big Twin & Sportster models 1973/Later
Replaces HD# 74589-73

Seal Beam Headlight 7"Od 65/35 Watts Halogen 12V Dot Approved Rpls Hd 67717-64 M# 6024
Economically priced sealed beams with nonreplaceable bulbsWagner Lighting
7 Headlight, sealed beam halogen bulb, 12 volt, 65/35 watts, DOT Approved
MG# 6024

Taillight & Turn Signal Bulb 12V W/Small Od Use W/Limited Clearance Rpl 68168-89 B1007
V-FACTOR
Clear low profile bulb with dual element, 12 volt, 30/4 candle power, 20/5 wattage, 9/16 globe length, .730 globe O.D., .600 base O.D.
Replacement for 11410 & 11411
Package of 10

Halogen H-4 Bulb Dual Contact 12 Volt 100/55 Watts Replaces Hd 67697-81
These H4 style double contact Headlight Bulbs can be used as an OE replacement or on all headlights that require a replacement bulb with a P43T base.Candlepower
Replacement 12 volt 100/55 watt standard H4 Halogen Bulb
Fits 5 ³/₄ & 7 O.D. Headlights
Replaces HD# 67697-81

Skull Taillight Lens Red/Clear Skull Cat Eye Taillight With 4-1/2" Mt Holes Red Bulb/Led

• Transform your ordinary cateye taillight into a unique eye catcher with minimal cost
• Inside of lens in faceted to improve light dispersement
• Mounts with existing hardware
• Designed for the standard cateye taillight with lens that mounts on 4 ¹/₂ centers including our 11201, 11219 or 11223
• Must be used with red incandescent bulb or red LED's (except 11778)

V-FACTOR
Plastic Red Lens with White Skull

Bullet Turn Signal,Bulb Type Front/Rear, Single Function Chrome Housing,Amber Lens

• These custom 2 3/8 O.D. bullet style turn signals are offered in amber lens but are easy to change. See replacement lenses below
• Available in bulb or LED as listed below
• Measure 3 1/2 long and are threaded 5/16-18 and include 18 of lead wire
• Non-fluted lenses snap in place for easy bulb changes and meet DOT specifications
• Sold each

V-FACTOR
Front/Rear Style Mount
Chrome Plated with Amber lens
Single ilament Incandescent bulb Style

Turn Sig/Running Lt Amber Lens Fl 63/85,Fx 71/E 73,Fxrt 83/85 Single Filament Hd 68557-70A

• 12 volt Turn Signal Light Assembly is chrome plated die cast just like the original and is wired with a single filament bulb for front or rear fitment
• Amber lens turn signals can be used on the front or rear of the motorcycle

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Light Assembly
Amber Lens, Single ilament
Fits L 1963/1985, X 1971/Early 1973 & FXRT 1983/1985
Replaces HD# 68557-70A
(Imported)

Maltese LED Marker/Running Lt Custom Use,Cnc Billet Aluminum 2-1/4" X 2-1/4" X 3/4" Deep Cp

• Can be used as running lights and supplemental brake lights
• Measures 2 1/4 long x 2 1/4 wide x 3/4 deep
• 17 of lead wire
• Includes 5/16 through-bolt for mounting

V-FACTOR
Chrome Plated Set

Bullet Marker Light Amber Lens Dual Filament 12 Volt Chrome Plated

• A beautiful copy of theHarley-Davidson^® old style marker lights with 12 volt bulb and hidden wire mounting base
• Includes rubber mounting gasket and ⁵/₁₆ mounting stud with nut
• See below for availability of bulb and lens color

V-FACTOR
Chrome Plated Complete Assembly with dual filament bulb & amber lens
(Imported)

Bullet Marker Light Red Lens Dual Filament 12 Volt Chrome Plated

• A beautiful copy of theHarley-Davidson^® old style marker lights with 12 volt bulb and hidden wire mounting base
• Includes rubber mounting gasket and ⁵/₁₆ mounting stud with nut
• See below for availability of bulb and lens color

V-FACTOR
Chrome Plated Complete Assembly with dual filament bulb & red lens
(Imported)

Skull Cateye Taillight Univ Mt W/Clear Skull/Red Lens Cp Die Cast 4 Step Housing

• LED type taillight includes 33 red LEDs for the brake/running light function and 6 separate white LEDs to illuminate the license plate
• Die cast housing features a four step design
• lat backed housing for custom use mounts on 2 centers

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Skull Cateye Taillight (LED type)

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.

V-FACTOR
Chrome Plated LED type Taillight Assembly only
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

5 3/4"Custom Headlight Asy,12V 6"Long W/Bottom Mount & 60/55W Halogen Bulb,Black Powder Coat

• 60/55 Watt Halogen
• This 6 long aluminum assembly features a cam lock style bezel and a lens that meets DOT specifications
• Includes a replaceable H4 style 12 volt 60/55 watt halogen bulb
• Requires a ³/₄ wide male mount

Note: Does not include a high beam indicator and should be used accordinglyV-FACTOR
Matte Black Headlight Assembly

Battery Cushion,Neoprene Black All Motorcycles 5"X8" With Adhesive Back. Cut To Any Size

• Made out of high quality neoprene foam, which is non-absorbent and retains Fits shape well under pressure without flattening
• Has adhesive stick backing to make sure it stays in place

HARDWARE
5 x 8 Cushion
Replaces HD# 66103-74A

Ign Switch Housing Align Tool Touring Mdls 03/L*,V-Rod 02/L* Jims #943

• This tool will easily align the ignition switch housing as the retaining screws are being torqued
• This gives the ignition switch knob the alignment it needs to help extend the life of ignition switch housing

Jims
Alignment Tool (sold each)
Fits L Touring models 2003/Later &V-Rod 2002/Later