Best selling products

V-Twin Manufacturing Rear Fender Kit Bobbed - Kit
Rear Motorcycle Fender Kit Bobbed OEM No: 60025-01 Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp. Fender is 6-1/2" wide. We suggest pre fitting fender prior to painting. Orde

V-Twin Manufacturing 5" Front Motorcycle Fender Spring Style Raw, FXSTS 1988-1992 - Sold Each

Vintage Spring front fender is raw with brackets.
We suggest pre fitting the fender prior to painting.

FXSTS 1988-1992

V-Twin Manufacturing 58-84 BT Bob Rear Fender Kit w-Stock Tl - Kit

Bobbed rear fender kit includes a pre drilled steel fender, chrome sturts, chrome tail lamp bracket, and stock style tail lamp.
We suggest pre fitting the fender prior to painting.
OEM: 59593-80

Custom application

Tech Note:

T

V-Twin Manufacturing OE Front Fender,. 1984-91 - Sold Each

Front fender is constructed of steel and has a raw finish. Fender has chrome tubular type brackets.
Brackets are riveted in place. Does not come with a cable bracket. We suggest pre fitting the fender prior to painting.
OEM: 59007-84

FX 19

V-Twin Manufacturing Rear Fender Kit Bobbed, fits 1982-1993 XL - Kit

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.
We suggest pre fitting fender prior to painting. Order chrome struts and covers separately.

XL 1982-1993

V-Twin Manufacturing 1 Piece Springer Fender without Braces - Sold Each

Spring fork front fender has a raw finish and is 7-1/2" wide for 16" or 18" wheels. Fender is equipped with two top holes and four rivet holes.
Fender is without brackets. We suggest pre fitting the fender prior to painting.

EL 1936-1940
F

V-Twin Manufacturing Spring fork front fenders are 7-1/2" wide, WL 1936-1952 - Sold Each

Spring fork front fenders are 7-1/2" wide for 16" or 18" wheels. The fender body is one piece construction with riveted on 7/8" wide braces.
For use on models with 3/8" axle and rockers inside the spring fork, for the 1/2" brake drum style wheel.

V-Twin Manufacturing Replica Rear Fender Raw, fits FL 1979-1984, OEM 59641-82A - Sold Each

Replica rear fender has a raw finish and is one piece.Fender is equipped with turn signal indents.
Fender uses late 1973-up large style tail lamp. We suggest pre fitting the fender prior to painting.
OEM: 59641-82A

FL 1979-1984

V-Twin Manufacturing Military Motorcycle Front Fender, WL 1937-1952 - Sold Each

Skirtless front fender is a 1940 army style for 45 solo models with spring forks. Fender comes with braces that are 5/8" wide.
Hole closest to the front of fender measures 1-7/8" center to center and 18-3/4" from front the fender. Center hole measur

V-Twin Manufacturing Military Motorcucle Rear Fender, WL 1937-1952 with Spring Forks - Sold Each

Rear fender is skirtless Army style of the 1940's for 45 Solo models with Spring Forks.

OEM: 3710-41A

WL 1937-1952 with Spring Forks

Measurements:

Fender Width: 7-3/8"
Braces: 8-1/4"

V-Twin Manufacturing Rear Fender Stock, 1981-up FXR-FXRS - Sold Each

Replica rear fender is constructed of steel and has a raw finish.
The width of the fedner is 7-1/2". We suggest pre fitting the fender prior to painting.
OEM: 59634-81A

FXR 1982-1994

V-Twin Manufacturing Rear Fender w-Taillight Cut Out, 1973-78 C Flip - Sold Each

Replica rear fender is flip style with hinged tail.
Fender uses late 1973-up large style tail lamp and must be cut out. This fender is not equipped with signal indents. We suggest pre fitting the fender prior to painting.
OEM: 59604-69C

FL

V-Twin Manufacturing Replica Springer Front Fender, without Braces - Sold Each

Replica one piece stamped springer front fender with holes and a raw finish.
Fender does not include brackets and may require further preparation. We suggest pre fitting the fender prior to painting.

EL 1936-1940
WL 1936-1952 45"
F

V-Twin Manufacturing Replica Glide Front Fender With Holes 86-up FLSTS - Sold Each

Replica glide front fender has a raw finish with fender trim mount holes.
We suggest pre fitting the fender prior to painting.
OEM: 59129-86

FLST 1986-UP
FLSTN 1986-1999

V-Twin Manufacturing Replica Spring Fork Front Fender, 1947-48 BT Replica - Sold Each

Replica spring fork front fender features one piece construction with wide braces riveted into the fender body.
Fender braces fit on the outside of the offset rockers. We suggest pre fitting the fender prior to painting.

UL 1947-1948
FL 19

V-Twin Manufacturing Replica Front Fender w-Narrow Brace Set, 1936-46 BT Replica - Sold Each

Replica front fender with raw finish, OE style rivets, a one piece seamless fender body, and narrow braces
Fender braces fit on the outside of the offset rockers. We suggest pre fitting the fender prior to painting.

EL 1936-1940
FL 1941-19

V-Twin Manufacturing Replica Front Fender w-Early Type Bracket, 1949-57 - Sold Each

Replica glide front fender with a raw finish with correct early type bracket set riveted on.
Fender is without trim holes. We suggest pre fitting the fender prior to painting.
OEM: 59000-48A

FL 1949-1957

Measurements:

Width: 7-1/

V-Twin Manufacturing Front Fender Inner Brace - Sold Each
Raw front fender weld in inner brace for underside with two holes. Fits: EL 1936-1940 FL 1941-1962 UL 1938-1948 UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing XL Replica Steel Rear Fenders for 1982-2003 - Sold Each
XL Replica Steel Rear Fenders for Sportster 1982-2003 Bobbed rear fender is constructed of steel and has a raw finish. Fender is without the tail lamp cut out, is not drilled, and are not equipped with wiring tabs on the inside of the fend

V-Twin Manufacturing Rear Fender w-Hinge & w-o Tail lamp Hole, 1958-78 FL B Flip - Sold Each

Rear fender is raw with hinged tail is 7-3/8" wide.
Accepts tombstone or beehive type tail lamp. Tail lamp hole must be cut out. We suggest pre fitting the fender prior to painting.

FL 1958-1978

V-Twin Manufacturing Stock Rear Fender, C Stock 1973-84 FX-FXE - Sold Each

Replica rear fender accepts tail lamp. Uses either stock or smooth struts.
We suggest pre fitting the fender prior to painting.
OEM: 59584-73A

FXE 1973-1985

Tech Note:

Suggested to use with #33-0301 tail lamp
Suggested to

V-Twin Manufacturing Rear Fender End w-o Holes, 1958-78 No Cut Out - Sold Each

Rear fender end with one half of hinge riveted on the one end.
This fender end is not equipped with tail lamp hole or pre drilled. We suggest pre fitting the fender prior to painting.

FL 1958-1978

V-Twin Manufacturing Rear Fender Tip, Rear - Sold Each
VT No: 50-0682 Rear fender tip. Fits: FLSTS 1997-UP UOM: 1 - EA Country of Origin: Imported

VTwin Manufacturing VTwin Manufacturing Front Fender Tip - Sold Each
VT No: 50-0681 Front fender tip. Fits: FLSTS 1997-UP UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing Streamlined Luggage Rack, Chrome, 06-08 FLHX, 99-08 FLHR, FLHS - Sold Each

Chrome streamlined luggage rack flows with the long and lean lines of your ride. The rails and arched fender support with hidden hardware gives the appearance of a floating rack design.
Order turn signal bar and license plate relocation kit separate

V-Twin Manufacturing Oval Tool Box Key Set - PR

Tool box key set.

OEM: 64340-26

Replacement application for our replica oval tool boxes

V-Twin Manufacturing Rectangular Chrome Motorcycle Tool Box - Sold Each
Rectangular Chrome Motorcycle Tool Box Chrome rectangular tool box includes keys. Order mount hardware separately. Fits Harley-Davidson models: EL 1936-1939 UL 1938-1939 Measurements Length: 8-1/

V-Twin Manufacturing FLSTF Style Replacement Rear Fender fits FLST-FXST models 2007-up Replica - Sold Each

10" Rear fender is constructed of steel and has a raw finish.It is a one piece design and accepts stock tail lamp.
Fender does not include tail lamp or is equipped with plate holes. We suggest pre fitting

FLSTF 2007-UP

Measurements:

V-Twin Manufacturing FLSTF Style Replacement Rear Fender fits FLST-FXST models 2007-up Replica - Sold Each

Replica raw rear fender with tail lamp mount holes. Fender is a one piece design.
We suggest pre fitting fender prior to painting.
OEM: 59819-06B

FLSTF 2007-UP

Measurements:

Outer Width: 9-7/8"
Length: 30-7/8"
Height: 11"

V-Twin Manufacturing 7-1/8" Bolt on Motorcycle Luggage Rack, 1984-Up - Sold Each

Luggage rack bolt on, mount to side straps of sissy bar on rigid side plates and detachable side plates.
The inside width bewteen the mount brackets is 7-1/8". Rack is designed for loads of 10 pounds or less.
OEM: 53718-04

XL 2004-UP with