Best selling products

V-Twin Manufacturing Rear Fender Skirt Set, 4 Piece, 1936-52 45 - Set

Rear fender skirt set for side valve models

WL 1936-1952
EL 1936-1954
U 1936-1948
FL 1941-1954

V-Twin Manufacturing 6" Rear Fender Flat Bobbed Raw Unfinished - Sold Each

Unfinished 6" wide heavy duty rear bobbed flat fender is rolled of 16 gauge steel and is 1-1/4" deep.
Fender may require trimming and finishing for chain relief. We suggest pre fitting the fendor prior to painting.

Custom application

Measur

V-Twin Manufacturing FXLR Front Fender w-Chrome Bracket - Sold Each

Narrow front fender has a raw finish with chrome brackets riveted on.
Fender is for 35mm and 39mm forks with a 19 or 21" wheel. The width of the fender bracket mount holes is 2-5/8". We suggest pre fitting the fender prior to painting.
OEM: 5899

V-Twin Manufacturing Unfinished 6" Flat Fender - Sold Each

Unfinished 6" wide heavy duty rear flat fender is rolled of 16 gauge steel and and is 1-1/4" deep.
May require trimming and finishing for chain relief. We suggest pre fitting the fender prior to painting.

Custom application

Measurements:

V-Twin Manufacturing Rear Fender Stock, 1982-1993 XL-XLCH - Sold Each

Replica rear steel fender is equipped with a tail lamp hole and mounts to stock struts.
We suggest pre fitting the fender prior to painting.
OEM: 59674-81A

XL 1982-1993

Tech Note:

Suggested to use with #33-0301 tail lamp

V-Twin Manufacturing 7.25" Left Cut F.Bob Rear Fender - Sold Each

Bobbed rear fender for rigid models has a raw finish with a left side cutout.
Fender measures 7-1/4" wide and 5-1/2" deep and does not include bracket. We suggest pre fitting the fender prior to painting.

Custom application for rigid frame

V-Twin Manufacturing 7.25"Right Cut Fat Bob Rear Fender XL - Sold Each

Bobbed rear fender for rigid models has a raw finish with a right side cutout. Fender is 6-3/4" wide.
Fender measures 7-1/4" wide and 5-1/5" deep and does not include bracket. We suggest pre fitting the fender prior to painting.

Custom applic

V-Twin Manufacturing Swing Arm Bob Rear Fender, WG Style - Sold Each

Bobbed style rear fender is constructed of steel.
Fender is not equipped with a tail lamp hole. We suggest pre fitting the fender prior to painting.
OEM: 59904-80

FL 1958-1985

V-Twin Manufacturing Rear Fender w-o Tailight, 1952-1978 XL-XLCH - Sold Each

Rear fender is raw and mounts to stock struts.
Fender is not equipped with a tail lamp hole. We suggest pre fitting the fender prior to painting.

XL 1952-1978

V-Twin Manufacturing Stock Rear Fender, 1959-1972 - Sold Each

Replica steel rear fender is equipped with a tail lamp hole and mounts to the struts.
Measures 6-3/8" wide with a length of 29". We suggest pre fitting fender prior to painting.
OEM: 59611-67A

XL 1959-1972

Tech Note:

Suggested

V-Twin Manufacturing Rear Fender, 1979-1981 XL-XLCH - Sold Each

Replica rear fender is equipped with a tail lamp hole and mounts to stock struts
We suggest pre fitting the fender prior to painting.
OEM: 59674-79A

XL 1979-1981

Measurements:

Overall Length: 24"

Tech Note:

Sugge

V-Twin Manufacturing Custom Rear Fender w-FLare End, 1952-1978 XL - Sold Each

Custom rear fender is constructed of steel and has flared end. Fender mounts to stock struts.
Fender does not have a tail lamp hole. We suggest pre fitting the fender prior to painting.

XL 1952-1978

V-Twin Manufacturing Spring fork front fenders are 7-1/2" wide, 1936-1948 - Sold Each

Spring fork front fenders are 7-1/2" wide for 16" or 18" wheels with riveted on wide braces.
Fender braces fit on the outside of the offset rockers. Fender is not pre-drilled. We suggest pre fitting the fender prior to painting.
OEM: 59000-36

V-Twin Manufacturing Rear Fender, 1939-52 45 Solo - Sold Each

Rigid rear fender with narrow braces features relief over skirt to accept stainless fender trim attached by clips.
Fender is fully assembled and riveted together with hinge. We suggest pre fitting the fender prior to painting.
OEM: 59612-41

V-Twin Manufacturing Front Fender w-o Bracket, 1979-84 Less Brackets, Raw - Sold Each

Replica raw front fender with lamp indent.
Brackets are not included. Fender fits 41mm wide style glide forks with 16" wheel. We suggest pre fitting the fender prior to painting.

FL 1979-1984

V-Twin Manufacturing Harley-Davidson Replica Front Fender fits FLT 1987-1999,59093-87 - Sold Each
Harley-Davidson Replica Front Fender Raw metal OEM No: 59093-87 Replica glide style front fender has a raw finish with holes. We suggest pre fitting the fender prior to painting. Fits Harley-Davidson models: FLT 1987-1

V-Twin Manufacturing Front Fender w-Trim Hole, 1949-84 Wide Glide - Sold Each

Replica wide glide front fender has a raw finish with trim holes.
Fenders fit 41mm wide style glide forks with 16" wheel. Fender is equipped with trim holes in the front for fender tip. We suggest pre fitting the fe

V-Twin Manufacturing XLX 19" Raw Front Fender w-Raw Bracket - Sold Each

Narrow type front fender has a raw finish and includes raw brackets that are riveted on.
Fender fits 35mm and 39mm forks with a 19" wheel. We suggest pre fitting the fender prior to painting.
OEM: 59031-83

XLX 1974-1990
FX 1974-1984

V-Twin Manufacturing Front Fender Early Raw fits XL 1957-1969 OEM 59007-52C - Sold Each

Early front fender has a raw finish with braces riveted on. Replaces stock fender.
We suggest pre fitting the fender prior to painting.
OEM: 59007-52C

XL 1957-1969

V-Twin Manufacturing Narrow Front Fender, Plain, 1949-84 FL - Sold Each

Narrow front fender has a raw finish and includes chrome braces riveted on.
For use on 19" or 21" tires only. Fender brace mount measure 3" center to center. We suggest pre fitting the fender prior to painting.

FLH 1949-1984

V-Twin Manufacturing Front Motorcycle Fender Glide Type Raw, 1980-Up, OEM 59924-80 - Sold Each

Wide glide type steel front fender has a raw finish and includes chrome bracket riveted on.
Fender is for use with 19" and 21" tires only. We suggest pre fitting the fender prior to painting.
OEM: 59924-80

FXWG 1980-1986
FXDWG 1991-UP

V-Twin Manufacturing Raw Front Fender w-o Trim Holes, 1949-84 FLH - Sold Each

Replica front fender has a raw finish with heavy gauge reinforced brackets riveted on.
Brackets are correct for 1958-1984 and will fit 1949-1984. Fender is for 41mm wide style glide fork assembly and 16" wheels. This fender is without trim holes for

V-Twin Manufacturing 19" Front Fender, Chrome, 1973-90 FX - Sold Each

Narrow front fender is chrome steel and features chrome brackets riveted on.
Fender is for use on 35mm or 39mm forks with a 19" wheel. We suggest pre fitting the fender prior to painting.
OEM: 59031-83

XLH 1974-1990
FX 1974-1984
FXR

V-Twin Manufacturing Stock Front Fender Assembled, 1970-83 Complete - Sold Each

Replica front fender comes in a raw steel finish is assembled with right side cable bracket.
We suggest pre fitting the fender prior to painting.
OEM: 59007-73B

FX 1973-1984
FXR 1982-1994
XL 1973-1989

V-Twin Manufacturing Glide Type Front Fender 80-up WG ST - Sold Each

Springer type fender comes in a raw finish with raw brackets riveted on.
For use on 19" and 21" tires only. We suggest pre-fitting all fenders prior to painting.

FXWG 1980-1984
FXWG 1985-1986
FXDWG 1991-UP
FXST 1984-UP

Measurements

V-Twin Manufacturing Black Mid Frame Air Deflector Kit - Sold Each

Black mid frame cover air deflector kit fits below the rider's seating area to direct engine heat away. Kit includes mounting hardware.
Sold in a pair.
OEM: 58022-07A

FLT 2001-2007

V-Twin Manufacturing Indian Chief HD Bolt Set 16L-2S - Kit

Indian Chief aluminum head bolt set

OEM: I32I0359D

Chief

V-Twin Manufacturing 32-48 61+BTSV Wrist Pin w-Lock - PR

Side valve wrist pin with lock

OEM: 22775-36

UL 1937-1948

V-Twin Manufacturing 1941-64 BT Replica Dip Stock - Sold Each

Replica dipstick has a blade style cap and includes a copper washer

FL 1941-1964

V-Twin Manufacturing Indian. Chief-Piston Pin Set w-Locks - Set

Indian chief piston pin set with locks

Chief

V-Twin Manufacturing Indian Chief .060 Over Size Ring Set - Set

74" Indian Chief .060 over size Hastings ring set, (3.25 bore). Includes 3 compression rings (3/32"), and 1 single piece oil ring (5/32").

Chief

V-Twin Manufacturing 74x.050 Indian Ring Set - Set

74" Indian Chief .050 over size Hastings ring set, (3.25 bore). Includes 3 compression rings (3/32"), and 1 single piece oil ring (5/32").

Chief

V-Twin Manufacturing 74x.040 Indian Ring Set - Set

74" Indian Chief .040 oversize Hastings ring set, (3.25 bore). Includes 3 compression rings (3/32"), and 1 single piece oil ring (5/32").

Chief