Best selling products

V-Twin Manufacturing Rear Fender 02-05 FXD-FXDL - Sold Each

Bobbed rear fender has a primer finish. Fender measures 7-1/2" wide with stock cut out.
Can be used as an replacement for FXDWG models. We suggest pre fitting fender to prior to painting.
OEM: 59918-02

FXDWG 2002-2005
FXD 2002-2005

Bobbed rear fender features a raw finish. Fender is for Dyna models and 200mm tire applications.
Stock replacement on Dyna Wide Glide models but can be used to updated standard Dyna models to Dyna Wide Glide look. We suggest pre fitting the fender prior to painting.

OEM: 59925-06

FXD 2006-2017
FXDC 2006-2017
FXDWG 2006-2009 200 tire
FXDL 2006-2017
FXDB 2006-2008

Measurements:

Length: 27-1/32"
Width: 9-1/2"
Height: 6-1/2"

Chrome curved rear fender strut set. Fits: Custom application for 8" to 12" wide fenders UOM: 2 - PR Country of Origin: Imported

V-Twin Manufacturing Front Fender Mount Spacer Set, Chrome - PR

Chrome fender mount spacer set is .750 thick. Set mounts custom fenders to Wide Glide forks.

Custom application for mounting fender to wide glide forks

V-Twin Manufacturing 9" Flat Fender Brace w-offset For Pulley - Sold Each

Flat fender brace has a raw finish and features offset for pulley and wide wheel with 9" fender.

Custom application for offset pulley and wide wheel.

V-Twin Manufacturing 6" Smooth Round Profile Chopper Fender has a Thickness of 1.05 mm - Sold Each

Smooth round profile chopper fender has a thickness of 1.05 mm.
We suggest pre-fitting the fender prior to painting.

Custom application

Measurements:

Width: 6"
Length: 38-1/2"
End to End: 28"

V-Twin Manufacturing Rear Fender Extension, Chrome, FXST-FLST, 1987-99 - Sold Each

Chrome curved type extension replaces stock plastic extension.

FXST 1986-1999
FLST 1986-1999

V-Twin Manufacturing V-Twin Manufacturing Raw Motorcycle Front Fender, 58900021 - Sold Each
Raw Motorcycle Front Fender OEM No: 58900021 Raw front fender. Fender shipped as raw steel without trim holes. NOTE: Fender fits forks only on all FLST and FLSTF models 1986-UP and Fab Bob Slim Softail with a heritage FLST fork assemb

V-Twin Manufacturing 7 1/2" Rear Motorcycle Fender Dresser Undrilled - Sold Each

Undrilled dresser rear fender measures 7-1/2" wide.
May require some modification. We suggest pre fitting the fender prior to painting.

Custom application

Measurements:

Depth: 5-3/4"

V-Twin Manufacturing XL-XLCH Replica Steel Rear Fenders for 2004-up - Sold Each
Bobbed rear fender is constructed of steel and has a primer finish. Fender does not have a cut out for the ignition module which may be required to accommodate the ignition module on 2007-up XL. When mounting to stock struts, drilling holes may be re

V-Twin Manufacturing Rear Fender Steel Primer Finish fits XL 2004-2009, 59865-07 - Sold Each
Rear Fender Steel Primer Finish OEM No: 59865-07 Rear fender is constructed of steel and has a primer finish. Fender has cut out for tail lamp and mounts to stock struts . Fender does not have a cut out for the ignition module and may

V-Twin Manufacturing Front Bumper, 1983-2013 Front, FLT-FLHR - Sold Each

Chrome front fender trim bumper without rubber insert.

OEM: 91085-83C

FLT 1983-2013

V-Twin Manufacturing Front Stock Type Fender 1970-83 Assembled Left - Sold Each

Replica raw front fender is constructed of steel. Features chrome tubular type brackets riveted in place. Fender is assembled with left side cable bracket.
We suggested pre fitting fender prior to painting.

FX 1973-1984
FXR 1982-1984
FX

V-Twin Manufacturing 21" Wyatts Front Fender, 2mm Steel - Sold Each

Wyatt Gatling front fender is constructed from 1.5mm raw steel.
Fender is desinged for custom applications, no mounting holes are drilled. Fender has 180A, coverage with built in 4-1/8" wide brackets. fender is 4-1/4" at the ends and gradually widens

V-Twin Manufacturing Glide Front Fenders for 2003-up FLSTC - Sold Each
Glide Style Steel Replica Front Fender OEM No: 59129-03 Replica glide style front fender is constructed of steel and has fender trim mount holes. We suggest pre fitting the fender prior to painting. Fits Harley-Davidson mod

V-Twin Manufacturing Luggage Rack Use w-Solo Seat, 2004-up XL - Sold Each

Luggage rack to be used with stock solo seat for 2004-2006 XL
Rack is designed for loads of 10 pounds or less.

XL 2004-2006

Measurements:

Length: 11"
Width: 5"

V-Twin Manufacturing Luggage Rack, Chrome, 2004-up XL - Sold Each

Chrome luggage rack has mounts which are 7" center to center.
Use with stock solo seat. Rack is desinged for loads of 10 pounds or less.

XL 2004-2008

Measurements:

Center-Center Mount: 7"

V-Twin Manufacturing Rear Fender Support Set, 2004-up XL - PR

Chrome rear fender strut cover fits over existing stock struts.

OEM: 59902-04

XL 2004-2008

V-Twin Manufacturing Sissy Bar Detachable Side Plates fits FXDWG 1993-2005, 53870-01A - Kit
Sissy Bar Detachable Side Plates OEM No: 53870-01A Side plates are detachable and can mount sissy bars with a width of 8-3/4". **NOTE:See Tech Notes for parts sold separately for specific fitments. Fits Harley-Davidson mode

V-Twin Manufacturing Luggage Racks for bobbed rear fender, 11 x 6 , 84-99

- Sold Each

Chrome luggage rack is for Bobbed rear fenders.
Rack is designed for loads of 10 pound or less.

FXST 1984-1999

Measurements:

Length: 11-1/2"
Width:

V-Twin Manufacturing Contour Fender Racks, 11 x 6 , 93-05 FXDWG - Sold Each

Chrome luggage rack features steel construction for use with solo seats.
Rack is designed for loads of 10 pound or less.

FXDWG 1993-2005

Measurements:

Length: 11"
Width: 6"

V-Twin Manufacturing Luggage Racks w-bobbed rear fender, 11 x 6 , 2000-04 - Sold Each

Chrome luggage rack is for Bobbed rear fenders.
Rack is designed for loads of 10 pound or less.

FLT 2000-2004
FXST 2000-2004

Measurements:

Length: 11-1/2"
Width: 6"

V-Twin Manufacturing 8.5" Flat Fender w-Bob - Sold Each

Unfinished 8-1/2" wide heavy duty rear flat fender is rolled of 16 gauge steel and is 1-7/8" deep.
Fender may require trimming and finishing for chain relief. We suggest pre fitting the fender prior to painting.

Custom application

V-Twin Manufacturing Front Fender Raw Universal Sport Style - Sold Each

Fender has a raw finish with a rolled edge and front.
The brackets are not included. We suggest pre fitting the fender prior to painting.

Custom application

Measurements:

Length: 23"
Width: 4"

V-Twin Manufacturing Stock Rear Fender, 1999-2003 XL-XLCH - Sold Each

Replica fender is constructed of steel and has a cutout for the tail lamp. Fender mounts to stock struts.
We suggest pre fitting the fender prior to painting.
OEM: 59674-99

XL 1999-2003

V-Twin Manufacturing Replica Rear Fender Steel, XL 1997-1998, 59756-97 - Sold Each

Replica rear fender is constructed of steel and has tail lamp hole. Fender mounts to stock struts.
We suggest pre fitting the fender prior to painting.
OEM: 59756-97

XL 1997-1998

V-Twin Manufacturing Rear Fender, 1982-93 XL - Sold Each

Replica steel rear fender has tail lamp hole. Fender mounts to stock struts.
We suggest pre fitting the fender prior to painting.
OEM: 59674-94B

XL 1994-1996

V-Twin Manufacturing Front Fender Right & Left Skirt, 1936-47 BT - PR

Skirt set for front fender includes the left and right side.

EL 1936-1940
FL 1941-1948
UL 1937-1948

V-Twin Manufacturing Ear Fender w/2 Piece Skirt, 1936-52 45 Solo w/Narrow Braces - Sold Each

Rigid fender features a two piece spot welded skirt and narr ow braces.
Fender comes fully assembled and riveted together with hinge. We suggest pre fitting the fender prior to painting.
OEM: 59612-41

WL 1950-1952

V-Twin Manufacturing Rear Bob Fender Kit, 1979-1981 XL - Kit

Kit includes steel fender and chrome tail lamp bracket which includes cat eye tail lamp.
Order chrome struts and covers separately. We suggest pre fitting the fender prior to painting.

XL 1979-1981

V-Twin Manufacturing Front Fender w-Chrome Brackets - Sold Each

Smooth front fender with chrome brackets.
We suggest pre fitting the fender prior to painting.
OEM: 59176-88

FXSTS 1988-1992

Tech Note:

Suggested to use #31-0864 clamp 1"
Suggested to use #31-0861 clamp 7/8"

V-Twin Manufacturing Motorcycle Rear Fender Bobbed, FXE 1972-1984 - Sold Each

Bobbed fender fits stock struts.
We suggest pre fitting the fender prior to painting. Order light brackets separately.

FXE 1972-1984

Tech Note:

Suggested to use with #31-0472 bracket