Best selling products

Wheel race puller tool without handle is for hubs with tapered races.
bearing race and cam needle installers. Wheel Race Puller. Replaces service Tool 33071, for hubs with tapered races 1973-up. All models. Item /Year: Puller 1973-99

Universal 18" chrome heat shield for use on 2" exhaust pipes. Includes clamps for installation. Custom for 2" pipes"

Daytona Helmets Chrome Novelty Helmets

Premium Classic German Novelty Item In Chrome Does Not Meet D.O.T. Standards. The German Novelty Item In Chrome Is Fully Lined With A Custom Formed Interior, For X-treme Comfort. Our Finish Is The Real Thing!! Virtually Scratch Resistant With A Mirror Like Finish. Free Head Wrap And Draw String Bag Included.

GMA ENGINEERING BY BDL Front Brake Master Cylinder Rebuild Kit, For GMA Master Cylinders., bore size 5/8", made in the usa, Each

• Clean design makes these assemblies a great choice for custom applications
• CNC-machined
• Assemblies fit most 1" diameter handlebars (except dimpled bars)
• Include mounting clamps and levers
• Hydraulic and cable clutch assemblies available
• Available with or without switch kit
• Switch kit includes three momentary switches with chrome or gloss black buttons and switch housing
• Switches can be wired internally or externally
• Sold each
• Made in the U.S.A.

Mikuni Plunger (N189.192), PLUNGER
Mikuni Carb Choke Plunger (N189.192), PLUNGER

Rocker Arm,Shims .007" Thick Shovelhead 66/Later Use To Set End Clearance Mfg #2252
HARDWARE
Rocker Arm Shim, .007 Thick
Fits Shovelhead all years
Package of 10

Belt Drive Part,Pulley Covers Fits Bdl 3" Open Drives Ex Sh Pol Alum W/Hardware Md-100

• Baby moon style.
• Polished aluminum.
• Offers better protection and reduces clutch noise.
• Includes special tape for permanent installation and button head bolts if you choose to drill and tap hub for easy on and off access.

NOTE: Does not include center plate pictured.

Polished aluminum pulley covers, includes double stick tape and screws for mounting. Fits 5 speed 3 open drives (Softail 1986/Later, FLT 1990/Later and FXR 1990/1994).

Front Axle W/Chrome Head Fxr Dyna Spt 1987/99 W/39Mm Fr Forks Replaces Hd 43895-87

• OE style steel front axles are a direct replacement
• Available as a complete kit with chrome spacer(s), washers and axle nut or just the axle by Fitself
• See the wheel section for axle spacers and axle nut & washer
V-FACTOR
Chrome Plated Axle only
Fits FXR, Dyna & Sportster 1987/1999 with 39mm front forks
Replaces HD# 43895-87
(Imported)

Fender,Rear Bobbed Tail Flat Universal Custom Use...6" Wide Rolled Heavy Gauge Steel

• Manufactured form 16 gauge rolled steel
• eatures a bobbed tail with a rolled edge
• ender measures 41 in circumference

V-FACTOR
Raw Steel 6 wide fender
Fits Big Twin & Sportster Rigid frame with chain or belt rear drive
(Imported)

Men's Black Cotton/Twill Sleeveless shirt
Men's Sleeveless Black Shirt in 100% Cotton Twill. 2 front buttoned chest pockets, with a snap down collar.

V-Twin Manufacturing Lens Retainer Clip Set for Teardrop Headlight - Pack
Tear Drop Headlamp Lens Retainer Clip Set Spring clip for 5-3/4" Headlamp. Fits Harley-Davidson models: All 6" headlamps UOM: 3 - PK Country of Origin: Imported

V-Twin Manufacturing 4 1-2" Chrome Bullet Style Spotlamp Trim - Set

Chrome 4-1/2" bullet style trim set is held in place by existing bulb and rim.

Custom application

V-Twin Manufacturing GMA Inside/Out Brake Pulley Kit Pad Set 4 pc - Kit
This brake pad set is for use on GMA-Inside Outside calipers. Fits Harley-Davidson models: Special application for GMA inside and outside brake pulley kit UOM: 1 - KIT Country of Origin: Imported

Chrome 2 into 1 exhaust lake style header pipes are designed to look like the hot rod side exhausts with 12mm oxygen sensor bungs. Includes heatshield and hardware. The turn out end is 3 in diameter. Fits with controls only. Header pipes are 1-3/4 with 16 gauge steel construction. Accepts 12mm oxygen sensor units bungs may be plugged for earlier applications. Will also work on many Rigid Chopper and Bobber models with left side drive.

**NOTE: These pipes will not work with floorboards. Collector is not baffled.

2012-2017 FXST
2012-2017 FXDWG

Sifton wrist pin bushing reamer tool is easy to use with their design lead in taper at the start of each ream. Order rod clamping tool separately. This tool is used to secure the rod while performing the reaming operation. The front of the taper is .767 body for actual reamed hole is .792 . 1936-1952 EL 1941-1984 FL 1985-1999 FL 1937-1952 WL 1937-1973 G 1937-1948 U

PAUL YAFFE BAGGER NATION Gloss Black Stealth III License Plate Frame, Harley 09-19 FL

• Clean up the look of your CVO and does away with the light box
• Direct bolt-on installation
• Hidden LEDs in the frame illuminate the license plate
• True plug-and-play wiring installation
• Include all necessary mounting hardware
• Made in the U.S.A.

Oil Cooler Standoff Clamps Cp Use With #89000 Oil Cooler 1-1/8" X 1-1/8" Aluminum

• Billet oil cooler has twin vertical tubes that follow the front downtubes on the frames of most models
• See below for availability of finish
• Requires standoff clamps for oil cooler

V-FACTOR
Chrome Plated Clamp Pair, 1 1/8 x 1 1/8
Required for use with 89000

Handlebar Brake Light Switch, Big Twin & Spt 1982/1995 Rpls Hd 71574-82 & 71590-92

• High quality original equipment style replacement handlebar switches
• See below for availability of finishes
• Meets OEM specifications
• Include OEM length wires for ease of installation

V-FACTOR
Brake Light Switch
Fits Big Twin & Sportster 1982/1995
Replaces HD# 71574-82 & 71590-92

Strutless rear fender is 2mm thick and has a width of 12.75" and constructed of steel. Fender will cover 280-300 series tire.
Let V-TWIN help you with that wide tire conversion. These strutless rear fenders will fit over the new tire and attach to the stock width frame. Fender will bolt to frames 11" wide where strut mounts. The width of the inside of the fender where it attaches to the frame measures 12-1/4". The stock strut supports must be removed from the frame. We suggest pre fitting the fender prior to painting. Position cut drill mount holes as required.

Strut Outer Width: 13-3/4"

Fender Inner Width: 12-1/2"

Fender Outer Width: 13-1/8"

Strut Inner Width: 13"

Strut Outer Width: 13-3/4"

V-Twin Manufacturing Harley-Davidson Saddlebag Lid Kit fits FLT 1985-1992 - Kit
Harley-Davidson Saddlebag Lid Kit Kit includes lids, gasket kit, and hardware kit. Pre-drilled and pre-fit for ease of installation. Ready for your custom finish! The process of injection created smooth inside and outside surfaces.

Ironhead LAF style header set features a chrome finish. *NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. 1957-1985 XL

Indian Scout short type drag pipe set features a black finish with straight pipes with white exhaust wrap. Pipe set is finished in heat proof black.

*NOTE: Pipes are equipped with O2 sensor ports.
*NOTE: Pipe set can be baffled with insert, available separately.
**NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.

2015-UP Scout

Black 1-1/4 handlebar is knurled and drilled for internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1974-1981 FL 1974-1981 FX 1974-1981 XL

Final drive steel 27 tooth front pulley. *NOTE: Must order nut and lock kit separately. 1991-2003 XL 883, 883C, 883 HUG, 883R

York Softail rear chain kit is for 5 speed models. Stock ratio is supplied with steel sprockets 22 tooth front and a 48 tooth rear with 120 link chain. Conversion kit includes everything needed to convert 1987-2006 5 speed belt drive system to a heavy duty530 chain drive. This kit is for a stock size rear tire. Chain will have to be cut to length breaker and master link included.
*NOTE: Use existing pulley spacer behind the transmission 22 tooth sprocket. When using a 21 tooth front sprocket: 48 tooth rear sprocket = 4% deeper (faster acceleration) 49 tooth rear sprocket = 6

19-0172 49 tooth splined engine sprocket is nickel plated. Can be used with 530 chain. *NOTE: For JD 2.5 mph change per tooth upon down.

1987-1999 FLST
1987-1999 FXST

VANCE & HINES Quiet Baffle, Big Shot Duals, Big Shots Long, Big Shots Staggered, Shortshots Staggered, Sideshots, Softail Duals, Straightshots, Throwbacks, Steel, Sold Each, Round, specific application

• Feature the revolutionary Power Chamber design; a unique cross-over system that increases horsepower and torque
• Armed with full-coverage 21/2" heat shields that are essentially blue-proof for long-lasting style
• Like all Vance & Hines systems, these feature a superior fit and an unrivaled finish in either chrome or race-quality matte black ceramic coat
• Flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-16 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
• Meticulously finished billet end caps
• Removable baffles and all mounting hardware included
• Made in the U.S.A.