Best selling products

Base Gskt By-Pass Pigtail Kit Bt Evo 84/99,Spt 86/L* Extends Oil Return Passage

• If you have an Evolution with about 20,000 miles on it, you have a base gasket leak! The factory has tried to remedy this problem with at least four different styles of cylinder studs to no avail
• Eliminates top end drain back oil from even touching the base gasket
• or best results use with metal base gaskets
• Tap the cylinder in the top end oil drain back hole with the supplied aluminum tap and install the PigTail^® with about one inch left protruding to be inserted into the crankcase
• Can be easily removed for cylinder service
• Designed for OE style cylinders (not intented for big bore cylinders)
• Includes instructions

HARDWARE
Complete Kit
Fits Big Twin Evolution 1984/1999 & Sportster Evolution 1986/Later

Engine Cylinder,Rear 1340Cc Shovelhead All Yrs Cast Iron Alloy Rpls Hd 16499-80A

• Top quality cast iron alloy replacement cylinders finished to the standard bore size
• Available in 3 7/16 1200cc (74ci) and 3 1/2 1340cc (80ci) size
• Painted black to prevent rust

V-FACTOR
Rear 3 1/2 Cylinder
1340cc (80 Cubic Inch)
Fits Shovelhead, all years
Replaces HD# 16495-78 & 16499-80A

Engine Cylinder,Front 1340Cc Shovelhead All Yrs Cast Iron Alloy Rpls Hd 16498-80A

• Top quality cast iron alloy replacement cylinders finished to the standard bore size
• Available in 3 7/16 1200cc (74ci) and 3 1/2 1340cc (80ci) size
• Painted black to prevent rust

V-FACTOR
Front 3 1/2 Cylinder
1340cc (80 Cubic Inch)
Fits Shovelhead, all years
Replaces HD# 16494-78 & 16498-80A

Rocker Shaft End Nut Kit Sh,Ihd Spt All Years Chromed Rpls Hd 6001 6466W 7522 7875

• Rocker shaft end nuts and washers replace the Red Dot nuts found on Shovelhead & Ironhead Sportster, all years
• Each kit contains 8 pieces

Colony
Chrome Plated Acorn Nut Kit
Fits Shovelhead & Ironhead Sportster, all years
Replaces HD# 6001, 6466W, 7522 & 7875

Engine Part,Top Head Bolts Stk Ph,Sh All Cad Rpls Hd 16814-77 6469Hw 20 Pcs Colony 7825-20

• Accurately machined from high strength steel and hardened to original Harley-Davidson^® specifications to prevent stretching
• All bolts feature rolled threads for superior strength and fit
• Number of pieces in kits indicated in ( )

Colony
Cadmium Plated 6 Point Head Kit
Includes washers (20)
Fits Panhead & Shovelhead 1948/Later
Replaces HD# 16814-77 & 6469HW

Rkr Sft End Plug & Nut Kit Sh Ihd Spt Late 71/L Cp Allen Screws,Washers - Colony.8224-8
Replace those rusted and worn rocker shaft end plugs with these high quality reproductions of the OEM style and plugs and shaft nuts & washers that came stock on Shovelhead Big Twins and Ironhead Sportster all years.its Shovelhead Late 1971/Later & Ironhead Sportster Late 1971/Later with Allen Screws.

Rkr Sft End Plug Kit Kn Style Sh Ihd Spt L 71/Later Chrome Rpls Hd 17448-71A Colony7142-4
These rocker shaft end plugs will add that classic Knucklehead look. Installation and removal is much easier than original slotted or allen plug. Sold in sets of 4.its Shovelhead Late 1971/Later & Ironhead Sportster Late 1971/Later.

Decorative Caps Chrome Plated For Compression Release Valves Uw Up To .485"Od Valves

• Includes silicone adhesive for easy installation
• CNC machined from billet aluminum

V-FACTOR
Chrome Plated Pair
Fits compression release valves up to .485 O.D.

Rocker Arm Adjuster Kit Shovelhead 1966/1984 Includes Teflon Seals,12 Piece

• Spring-type wave Washers eliminate the Rocker Arm End play noise that is common with the Shovelhead engine
• Includes high temperature End Plug Seals to eliminate troublesome oil leaks

V-FACTOR
Fits all Shovelhead engines 1966/Later
Kit includes 12 Pieces

Brake Caliper Kit, GMA Rear Fits 1986-1999 FLH & FLT Black Finish, Gma-103Fltb

• These custom Rear 2 Piston Calipers with hanger brackets and complete hardware kits are designed to replace old, worn-out calipers and brackets
• Calipers are machined from billet aluminum, clear anodized and feature dual pistons for the best braking possible
• The hanger brackets are Blanchard ground to specifications and carefully machined
• Kits fit applications listed below

Note: A 5/8" bore master cylinder must be used with these disc brake systems GMA

Black Caliper Kit
Fits FLH & FLT models 1986/1999

Caliper Bracket,Rear Softail 2000/Later* Black
HARDBODY
Black Rear Caliper Bracket
Fits Softail 2000/Later

Caliper Bracket Front All Models 84/99 Polished
HARDBODY
Polished ront Caliper Bracket
Fits all models 1984/1999 (except Springer)

Brake Caliper, 4 Piston All Models, Chrome

• Made in the USA, these 4 piston calipers are of the highest quality available
• The pistons are hard anodized aluminum for superior operation and long life
• Brake pad springs eliminate rattles and aid in caliper installation
• Brackets available for specific applications
• Uses DOT 5 brake fluid

HARDBODY
Chrome Plated 4 Piston Caliper

Brake Caliper,Rear Oem Style Fl 1973/80 Fx 1973/82 Fxe 1983 Use W/10"Or 11-1/2" Rotor - Cp

• Sold completely assembled with all internal components
• Includes brake pads and pins, mounting hardware and instructions

V-FACTOR
Chrome Plated Caliper Assembly
Fits X 1973/1982, XE 1983 & L 1973/1980
Replaces HD# 44008-80 & 44106-80
(Imported)

Brake Disc,Drilled 10"Od Fxwg(Special) 5/16"Bolt Holes No Hd Part Number

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled 10 O.D. & 2 I.D. Disc
E mount hole style & 5/16 bolt size
Special fit for XWG ront Dual Disc (application has smaller center hole for steel dual flange hubs with 5/16 bolts
(Imported)

Brake Disc,Drilled 11-1/2"Od All Single/Dual Fr Disc 84/99 Exceeds Oem..Rpls Hd 44136-92

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled 11 ¹/₂ O.D & 2 I.D. Disc
D mount hole style & ⁵/₁₆ bolt size
Fits all single or dual disc front brakes 1984/1999
Replaces HD# 44136-92
(Imported)

Brk Speed Bleeder Screw Valve All Brake Calipers W/3/8-24 Tpi Bleed Screw *N* M# R40526
Eliminate the possibility of spilling corrosive brake fluid on your expensive paint with this speed bleeder screw valve. Constructed with a stainless steel checkball and spring with a brass retainer, this chrome plated bleeder allows bleeding brakes by one person. After initial installation of this marvel, simply loosen the bleeder ¹/₄ to ¹/₂ turn and pump the brakes until bubble free fluid appears. The checkball prevents air from being sucked back into the system. Tighten the bleeder and the job is completed. Russell
Chrome Plated Speed Bleeder Valve
³/₈-24 threads per inch, Sold in Pairs
Fits L 1980/Later front & rear, X 1978/Later front & rear, Dyna 1991/Later front & rear & Sportster 1978/Later front & rear
Replaces HD# 44146-77, 44146-82 & 44048-83

Brake Part,Caliper Pad Pin Fr Fx 78/83 Fxs 77/79 & Spt 79/83 Rpls Hd 44162-77....Mfg .7004

• Supports the brake pads on dual disc models

HARDWARE
Front Caliper Pad Pins
Fits X 1978/1983, XS 1977/1979, Sportster 1979/1983
Package of 4
Replaces HD# 44162-77

Brk Shoes/Linings,Semi-Metal Rr Fl Fx 1963/Early 1972 Replaces Hd 41801-63
Asbestos free, semi-metallic liningsV-FACTOR
Brake Shoe Set
Fits rear on L & X 1963/1972
Replaces HD# 41801-63
(Imported)

Replacement Brake Pads For Hardbody 2 Piston Brake Calipers

• CNC machined 6061-T6 billet aluminum, designed to eliminate flex
• Anodized aluminum piston
• Centerless ground or exacting tolerances
• Quad seal for smooth action
• Light and compact
• Front or rear applications
• Requires separate caliper bracket
• See below for availability of finish

HARDBODY
Replacement Pads for Dual Piston Calipers

Brk Pads,Semi-Metallic Style 8 Flt Flh Models 1986/1999 Rear Replaces Hd 43957-86E
We offer three types of Brake Pads:

• SBS - High level technology and experience gained through working with all types of brake systems produces these asbestos free disc brake pads.
• Hawk Performance - Brake pads offer world-class braking performance for heavy bikes. This product line combines the quality and fitment of original equipment with unsurpassed stopping power and quiet braking performance.
• V-FACTOR - Non-asbestos brake pads are manufactured from high grade Kevlar/metallic compound that is top of the line and environmentally safe. Super stopping power. Clean, quite and easy on rotors.

V-FACTOR
Rear Disc Pad Pair
Fits FLT, FLH, FLHR & FLTR 1986/1999
Replaces HD# 43957-86B

Brake Pads,Sbs 543Hlf Style 2 Sportster 1979/1981 Rear Rpls Hd 44099-77 & 43395-80
We offer three types of Brake Pads:

• SBS - High level technology and experience gained through working with all types of brake systems produces these asbestos free disc brake pads.
• Hawk Performance - Brake pads offer world-class braking performance for heavy bikes. This product line combines the quality and fitment of original equipment with unsurpassed stopping power and quiet braking performance.
• V-FACTOR - Non-asbestos brake pads are manufactured from high grade Kevlar/metallic compound that is top of the line and environmentally safe. Super stopping power. Clean, quite and easy on rotors.

SBS
Rear Disc Pad Pair
Fits Sportster 1979/1981 (dual disc)
Replaces HD# 44099-77 & 43395-890
41mm x 63mm

Analog Tire Pressure Gauge 0/60 Psi In 1 Lbs Increments 2" Dial,10" Lg Flexible Hose

• Great for shop use when accuracy and ease of use is paramount
• 2 dial indicates 0/60 PSI in 1 pound increments and 0/400 KPA in 10 kilopascal increments
• Gauge holds reading after being removed from the valve stem
• Push button valve allows bleed-down to the desired pressure
• 10 long flexible hose includes a swivel end and an angled head for constricted areas
• Dial is protected by a rubber boot and a shatterproof lens

CruzTools
(Imported)

Digital Tire Pressure Gauge Displays 0/99 Psi In Tenth Lbs Increments,Plastic Housing

• Compact size is easy to carry in the tool kit
• Displays 0-99 PSI in 1 tenth pound incremenets. Also displays BAR, KPA & KG/CM2 scales
• Holds reading after removed from valve stem
• Includes button-type battery with auto off feature to conserve power
• Tough plastic housing with a total weight of only 1 oz.
• Includes instructions

CruzTools
3 ³/₈ length x 1 ³/₈ width x ³/₄ height
(Imported)

Tool,Valve Core Remover Fits Most Inner Tubes & Valve Stems,2 3/4" Long 08-0183

• All steel tool used to remove & replace the valve stem core on all tube or tubeless type tires
• Hex shape for a good grip

Motion Pro
2 ³/₄ total length
(Imported)

Wheel Tool, Rim Savers Nylon Protect All Types Of Rims From Scratches & Damage W/Tire Tool
Designed to protect all types and size rims from tire tool damage when mounting or dismounting tires. Easily clips over rim bead area and also can be secured by using a bungee cord to the eyelets. V-FACTOR
Sold in Pairs
(Imported)

Brake Part,Brake Pad Pin Fl 1972/1984,Fx Spt 1973 8 Pcs Replaces Hd 44124-72. Hw .7003
HARDWARE
Brake Pad Pins (2)
Fits L 1972/1984 & X, Sportster 1973
Replaces HD# 44124-72