Best selling products

Brake Caliper Seal Kit,Rear Flt Models 1980/85 Rear Rpls Hd 43945-79 & 43947-79
Disc brake caliper seal and boot kits are necessary when rebuilding a caliper. V-FACTOR
2 piece kit for rear caliper
Fits FLT 1980/1985
Replaces HD# 43945-79 & 43947-79

Brake Caliper Seal Kit,Rear Flt 87/99 All Other Model Late 1987/1999 Rpls Hd 44045-87
Disc brake caliper seal and boot kits are necessary when rebuilding a caliper. V-FACTOR
2 piece kit for rear caliper
Fits FLT 1987/1999 and all other models Late 1987/1999
Replaces HD# 44045-87

Brk Caliper Bleeder Vlv Repair Kit Fix Stripped Bleeder Screw Hole Mfg .7006
Until now a stripped brake caliper bleeder screw meant riders were faced with the very high cost of replacing an entire brake caliper assembly. This unique precision machined two-piece repair kit, is a fast, safe, inexpensive and reliable fix and is available for most caliers in use today.HARDWARE
Caliper Bleeder Screw Repair Kit

Axle Spacer,.986"Lg Chrome St Mdls(Ex Flsts),Fxdwg 00/L* Fr/Lh Rpls Hd 43683-00 .7345C

• High quality chrome plated steel external axle/wheel hub spacers are made to exact OEM specifications, but look a whole lot better
• Spacers O.D. measure 1.125 and are designed for ³/₄ O.D. axle

HARDWARE
Chrome Plated, .986 length
Fits front left on XSTS, XSTD, LST, LSTC & Dyna Wide Glide 2000/Later
Replaces HD# 43683-00

Wheel Hub Part,Brng Shim .004 Flt Mdls 82/99 Bt Spt 92/99 Replaces Hd 43293-82 Mfg.2267
HARDWARE
Wheel Bearing Shims
.004 thick, Package of 10
Fits FLT models 1982/1999 & Big Twin, Sportster 1992/1999
Replaces HD# 43293-82

Wheel Hub Part,Brng Shim .008 Flt Mdls 82/99 Bt Spt 92/99 Replaces Hd 43292-82 Mfg.2266
HARDWARE
Wheel Bearing Shims
.008 thick, Package of 10
Fits FLT models 1982/1999 & Big Twin, Sportster 1992/1999
Replaces HD# 43292-82

Bearing & Race Timken See Oem# For Uses Rpls Hd.9052
Timken
Bearing & Race Set
Fits Big Twin 4 speed 1958/1986 (except Softail)
Front hub fits X (except XS), Sportster 1974/1999 (except XLCR 1977)
Front & rear hub fits L, XWG & rear hub X & Sportster 1973/1999
Replaces HD# 9052

Wheel Hub Part,Ctr Spacer Wh 4.448"Long Use Same Color Rpls Hd43606-78 Mfg .7156

• Spacers for use without shims
• Color coded for length and machined to close tolerance
• These wheel hub bearing spacers are exact copies of the OEM parts
• Used to set the correct bearing end play on all disc brake wheel hubs without using shims
• Use these spacers with wheels that require a fixed length center spacer
• All hub center spacers sold each

HARDWARE
White without flanges
4.448 long, Replaces HD# 43606-78

Axle Spacer,Cut To Length Cus App 6"Lgx1-1/8"Odx 3/4"Id Uw/3/4" O.D. Axle,Rust Free Ss

• Designed for custom applications that require longer than stock external wheel hub/axle spacers
• Available for ³/₄ O.D. axle or 1 O.D. axle
• Made from rust free stainless steel with a super smooth machine finish that is suitable for polishing

V-FACTOR
Machine Finish ³/₄ I.D. Spacer, 6 length, 1 ¹/₈ O.D.
(Imported)

Sealed Wheel Bearing, 25Mm Fits All 25Mm Application Single Row Bearing, Hd9276
Single Row (Sealed) Wheel Bearing with 25mm I.D.
Replaces HD# 9276

Axle Nut,Washer & Cotter Pin Bt Spt 89/L* Uw Rr Axle 5/8-18 Thd & Cotter Pin Hole C-31-42
or use on rear axle that is drilled for a cotter in. ⁵/₈-16 thread.Gardner-Westcott
Chrome Plated Kit
Fits Big Twin & Sportster 1989/Later
Replaces HD# 7987, 5756 & 510

Highest quality American made OE style steel hub spacers are precision machined to the correct length to properly position spoke or cast wheels as listed. All spacers fit the OE ³/₄ O.D. axle and have the OEM 1 ¹/₈ O.D. for proper seal fit. Spacers are finished in chrome or cadmium plating for corrosion resistance and extended seal life. To control wheel end play, see the wheel section for hub center spacers. Due to the numerous models and years, if in doubt simply order the part by length.

Chrome Plated 1.340 long Non-Stepped Axle Spacer

Fits left on FLSTC, FXSTS, FXSTC, FXSTSB, 1997/1999 front

Replaces HD# 43683-97
Mfg. PN 7334C

Rear Axle Fxd Models 1991/2005 Rpls. Hd#41114-90

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

V-FACTOR
Chrome Plated Axle only
Fits Dyna models 1991/2005
Replaces HD# 41114-90
(Imported)

Front Axle W/Spacers & Nut Cp Fits Dyna Narrow Glide 04/05 Oe Style For 1" Bearings

• OE style steel front axles are a direct replacement
• Available as a complete kit with chrome spacer(s), washers and axle nut or just the axle by Fitself
• See the wheel section for axle spacers and axle nut & washer
V-FACTOR
Chrome Plated Axle Kit
Includes spacer(s), nut & washers
Fits XD 2004/2005
(Imported)

Axle,Rear W/Chrome Head Bt 5 Speed Chain & Belt 1980/L Replaces Hd 41110-79A

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

V-FACTOR
Chrome Plated Axle only
Fits FXR 1982/1994, FLT, FLHT & FLHR 1980/1999 - will fit 2000/Later (except FLT 2002/Later) models if using OEM spacers, Softail all models 1986/1999 - will fit 2000/Later (except FLT 2002/Later) models if using OEM spacers, Softail 2000/2006
Replaces HD# 41110-79A
(Imported)

Wheel, Billet Hub 60 Spoke All 79/99 Rear 16 X 3.00 Chrome, Billet Hub

• Drop center steel rims
• Chrome spokes
• Custom billet aluminum hubs are Show Chrome plated
• Includes bearings and seals
• * When replacing models equipped with 19 wheels with these 21 wheels, you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you much purchase custom shallow back brake calipers

V-FACTOR
Billet Hub with 60 Spokes
Rear, Dual 7/16 - 3/8 Flange
Tapered 3/4 Bearing
16 x 3.5 Size
Fits all models 1979/1999

Wheel, 40 Spoke 21 X 2.15 Fxst/Fxdwg 84/99 Sd 5/16 Holes Chrome

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hubs
• Includes bearings and seals

V-FACTOR
OE Hub with 40 Spokes
Front Single ⁵/₁₆ lange
Tapered ³/₄ Bearing
21 x 2.15 Size
Fits FXST & FXDWG 1984/1999
(Imported)

Th/Idle Cable Clamp Smooth Single Cable 1" Handlebars Die Cast Chrome Plated

Hitatchi type starter housing is a quality casting with all the machining done to specifications. Starter housing only.
Threaded mount holes, where the starter housing bolts to the primary. Order hardware and related parts separately.
OEM: 31

Brake Hose Asy,Clear Coat Chrome #3 Hose W/Female Ends Use W/Fittings 23"Long R58072S
Russell Cycleflex Universal series incorporates the beauty of quality show chrome with the convenience of fitting and choice backed by the reliability of factory assembly. Cycleflex hose reduces brake line expansion, minimizing brake fade. These universal series hoses are DOT approved. Use our wide selection of #3 adapter fittings and hose lengths to allow precise fitment to your motorcycle if you are replacing stock factory hose or working on a custom brake system. All adapter fittings are chrome plated except brake light switch banjo bolt 45503. Additional brake line fittings are located in the control section.Russell
Clear Coated #3 Braided Stainless Steel 23 Brake Hose with Chrome Ends

Spdo Cable,Armor Coat 43" Long 16Mm Spdo Nut/Ft Whl Dr Rpls Hd67048-83A Mopro 66-0132
These cables for Harley-Davidson^® speedometers fall into three groups depending on upper and lower end fittings. In order to simplify the listing of these cables, we have listed them in the charts below in sequence by type housing and length. If extra length is needed just order longer length in the same group. By using this listing method we are able to reduce part numbers. Those parts with * have nylon lined housings and are manufactured by Motion-Pro in the USA.Motion Pro
Braided Stainless Steel, 43 housing length
16mm Top Nut for at Bob Speedo. No Nut for front wheel drive
Fits XLH 883 & Deluxe 883 1986/1990, XLH 1100 1986/1987, XLH 1200 1988/1992, FXRC 1985/1987, FXRP 1986/1988, FXRS-SP 1985/1986, XLS 1983/Early 1984
Replaces HD# 67048-83A

Speedometer Cable,Vinyl 34-1/4 12Mm Top Spdo Nut/Fr Whl Drive 67026-81 67072-87B 67079-86A
These cables for Harley-Davidson^® speedometers fall into three groups depending on upper and lower end fittings. In order to simplify the listing of these cables, we have listed them in the charts below in sequence by type housing and length. If extra length is needed just order longer length in the same group. By using this listing method we are able to reduce part numbers. Those parts with * have nylon lined housings and are manufactured by Motion-Pro in the USA.V-FACTOR
Black Vinyl Cable, 35 Length
12mm Top Nut for small speedometers. No Nut for front wheel drive
Fits L 1981/1984, FLHS 1987/1994, LST 1986/1990, LSTC 1987/1995, LST 1990/1995, LSTN 1993/1995, FLTC 1987/1991, FLTCU 1989/1995, FLTCUI 1996, XDB-D 1992, XDB-S 1991, XDC 1992, XDL 1993/1994, FXRS 1988/1992
Replaces HD# 67026-81, 67072-87, 67072-87B& 67079-86A