Conventional Profile

Oe Style Gas Cap Touring Models 1992/Later* Rpls Hd 61274-92

• OE style black plastic gas cap
• or use with Touring models with gas tank fuel doors
• Sold each

V-FACTOR
Black Plastic OE style Gas Cap
Fits Touring models 1992/Later
Replaces HD# 61274-92

Gas Cap Cover Kromett Chrome Fits 2-9/16"Od Caps 1936/E1973 W/ Allen Screws To Install

• Kromett covers are die cast
• Covers attach to gas cap with allen screws
• Sold each

V-FACTOR
Chrome Plated Cover
Fits 1936/Early 1973 Caps & Caps with 2 9/16 O.D.

Gas Cap Domed 1/8"Tk Knurled All Models 1982/L* Vented Only Chrome Aluminum

• Covers are CNC machined from billet aluminum
• All caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Dome Style Vented Cap Only
With ¹/₈ Thick Knurled Edge
(Imported)

Gas Cap Point 1/8"Tk Knurled All Models 1982/L* Vented Only Chromed Aluminum

• Covers are CNC machined from billet aluminum
• All caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Point Style Vented Cap Only
With ¹/₈ Thick Knurled Edge
(Imported)

Gas Cap W/Paint Saver Ring Set Fatbob Models Rh/Lh 82/L*(Ex W Fuel Gauge

• Tamper resistant cap mounts flush with the paint saver ring and requires the spanner key for isntallation and removal of the cap
• CNC machined from billet aluminum
• Seals are made from fuel resistant viton
• The low profile paint saver houses the 1 ¹/₂ diameter locking gas cap

V-FACTOR
Chrome Plated
Left hand & right hand (Set)
Fits at Bob tank models 1982/Later
(Imported)

V-Twin Manufacturing Bung Type Filler Ring Polished Stainless Steel - Sold Each

Gas tank filler ring are polished stainless steel. They prevent paint from blistering and flaking around the filler neck.
Ring will also conceal existing paint damage in this area. For screw in type tanks.

FXST 1996-UP
FLST 1996-UP
FXD

V-Twin Manufacturing SS Low Profile Right & Left Gas Cap Set - Set

Set is polished stainless steel, and features right side gas cap, and left side dummy cap to replace fuel gauge.

FL 1983-1984
FXST 1984-1995
FLST 1986-1995

V-Twin Manufacturing Stock Style Motorcycle Gas Cap Vented fits 1936-1982, 61103-36A - Sold Each
Stock Style Motorcycle Gas Cap Vented OEM No: 61103-36A Stock vented gas cap fits FL type bobbed tanks. The gas cap is for the right hand side of a dual or single cap tank. The show chrome finish on these stock style gas caps will enh

DRAG SPECIALTIES Replacement Areo Vented 95mm Gas Cap

• Replacement gas caps for Drag Specialties gas tanks that accept Aero caps
• Include keys, gasket and bolts

DRAG SPECIALTIES Replacement Areo Vented 120mm Gas Cap

• Replacement gas caps for Drag Specialties gas tanks that accept Aero caps
• Include keys, gasket and bolts

DRAG SPECIALTIES Wrinkle Black Vented Pop-Up Gas Cap, Harley 82-96 FX 82-96 FL 82 - 96 XL

• Billet aluminum construction that is available in a polished chrome or black finish
• Fit is nearly flush when closed; opens easily with just a quarter-turn of the center of cap
• Styles available to fit early and late-model OEM gas tanks with screw-in style gas caps
• Sold each

DRAG SPECIALTIES Chrome Non-Vented Pop-Up Gas Cap, Natural, Harley 82-96 FX 82-96 FL

• Billet aluminum construction that is available in a polished chrome or black finish
• Fit is nearly flush when closed; opens easily with just a quarter-turn of the center of cap
• Styles available to fit early and late-model OEM gas tanks with screw-in style gas caps
• Sold each

DRAG SPECIALTIES Screw-In Locking Vented Gas Cap, Harley 96-15 FX 93-15 FL 96 - 15 XL

• Chrome locking cap discourages fuel theft and tampering
• Lock has a swing-away cover to keep dirt and debris out of the locking mechanism
• Come with two keys
• Sold each

DRAG SPECIALTIES Chrome Screw-In Locking Non-Vented Gas Cap, Natural, Harley 82-96 FX 82-96 FL

• Chrome locking cap discourages fuel theft and tampering
• Lock has a swing-away cover to keep dirt and debris out of the locking mechanism
• Come with two keys
• Sold each

DRAG SPECIALTIES Chrome Screw-In Locking Vented Gas Cap, Natural, Harley 82-96 FX 82-96 FL 82 - 96 XL

• Chrome locking cap discourages fuel theft and tampering
• Lock has a swing-away cover to keep dirt and debris out of the locking mechanism
• Come with two keys
• Sold each

DRAG SPECIALTIES Dummy-Style Gas Cap With Paint Protector, Harley 96-15 FX 93-15 FL

• Chromed low-profile gas caps feature screw-in paint protectors and ratchet-action cap
• Available in vented, non-vented and dummy styles
• Vented cap has right-hand threads and can be used in either the right side of double-capped tanks or in single-cap tanks
• Non-vented cap has left-hand threads and is used only in the left side of double-capped tanks
• The dummy cap replaces the OEM fuel gauge in tanks that feature the fuel gauge in the left side; does not feature a fuel gauge
• Sold each; comes complete with installation tool for paint protector

DRAG SPECIALTIES Vented Gas Cap With Paint Protector, Harley 96-15 FX 93-15 FL 96 - 15 XL

• Replace your stock cap and gas gauge with these sleek caps
• Left-side cap features a low-fuel LED warning light built in; push-in installation and wiring harness included
• User-programmable to light the LED at any pre-set fuel level
• Fits all bikes with a left-side analog gas gauge
• Matching right-side filler cap is vented and includes a screw-in paint protector ring and ratchet action cap (sold separately)
• Chrome finish
• Fuel level cap made in U.S.A. for Drag Specialties by Namz Custom Cycle Products

DRAG SPECIALTIES Gas Tank With Chrome Aero-Style Gas Cap And Left-Side Petcock, Harley 95 - 03 XL

• Rubber-mounted bolt-on style flat-bottom tank is made from heavy-gauge steel
• Reinforced seams and extra-strong mounting tabs
• "High-tunnel" design adds fuel capacity without looking tall; 3.3-gallon capacity
• Features a chrome aero-style locking gas cap with keys
• Accepts a 22mm petcock; sold separately

Gas Cap Cover,Kromett Style Fits 2-5/16"Od Caps L1973/1982 W/Allen Screws To Install

• Kromett covers are die cast
• Covers attach to gas cap with allen screws
• Sold each

V-FACTOR
Chrome Plated Cover
Fits Late 1973/1982 Caps & Caps with 2 7/8 O.D.

Gas Caps Domed 1/8"Tk Knurled All Models 1982/L* W/Dual Caps Chromed Aluminum

• Covers are CNC machined from billet aluminum
• All caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Dome Style Cap Set
With ¹/₈ Thick Knurled Edge
(Imported)

Gas Cap Domed 3/8"Tk Grooved All Models 1982/L* Vented Only Chromed Aluminum

• Covers are CNC machined from billet aluminum
• All caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Dome Style Vented Cap Only
With ³/₈ Thick Grooved Edge
(Imported)

Gas Caps Domed 3/8"Tk Grooved All Models 1982/L* W/Dual Caps Chromed Aluminum

• Covers are CNC machined from billet aluminum
• All caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Dome Style Cap Set
With ³/₈ Thick Grooved Edge
(Imported)

Gas Caps Point 3/8"Tk Grooved All Models 1982/L* W/Dual Caps Chromed Aluminum

• Covers are CNC machined from billet aluminum
• All caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Point Style Cap Set
With ³/₈ Thick Grooved Edge
(Imported)

Gas Cap W/Paint Saver Ring Cp Fatbob Models Lh82/99(Ex Fuel) Gauge) Non-Yaned Lh Thd

• Tamper resistant cap mounts flush with the paint saver ring and requires the spanner key for isntallation and removal of the cap
• CNC machined from billet aluminum
• Seals are made from fuel resistant viton
• The low profile paint saver houses the 1 ¹/₂ diameter locking gas cap

V-FACTOR
Chrome Plated
Non-vented with left hand thread
Fits ab Bob tank models (left side) 1982/Later (except with fuel gauges)
(Imported)

Gas Cap W/Paint Saver Ring Cp Fatbob Models Rh Spt 82/L* Vented Rh Thd Cnc Billet Alum

• Tamper resistant cap mounts flush with the paint saver ring and requires the spanner key for isntallation and removal of the cap
• CNC machined from billet aluminum
• Seals are made from fuel resistant viton
• The low profile paint saver houses the 1 ¹/₂ diameter locking gas cap

V-FACTOR
Chrome Plated
Vented with right hand thread
Fits at Bob models (right side) 1982/Later & Sportster 1982/Later
(Imported)

Gas Cap, Drop Point All Models 1982/L*, Set Of 2 Knurled Edge, Chrome Plated

• All Gas Caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Gas Cap Set
Style: Drop Point
Fits all models 1982/Later

Gas Cap, Drop Point All Models 1982/L* Vented Knurled Edge, Chrome Plated

• All Gas Caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Gas Cap
Style: Drop Point, vented only
Fits all models 1982/Later

Gas Cap, Chrome Star All Models 1982/L*, Set Of 2 Chrome Plated

• All Gas Caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Gas Cap Set
Style: Chrome Star
Fits all models 1982/Later

Gas Cap, Chrome Star All Models 1982/L* Vented Chrome Plated

• All Gas Caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Gas Cap
Style: Chrome Star, vented only
Fits all models 1982/Later

Gas Cap, Ray Star All Models 1982/L*, Set Of 2 Machined W/Black Accents

• All Gas Caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Machined Gas Cap Set
Style: Ray Star
Fits all models 1982/Later

Gas Cap, Ray Star All Models 1982/L* Vented Machined W/Black Accents

• All Gas Caps are non-ratcheting
• Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Machined Gas Cap
Style: Ray Star, vented only
Fits all models 1982/Later

Spinner Gas Cap,Chrome Plated 1982/Later* Models W/Screw In Right Hand Thread,Billet Alum

• CNC machined from billet aluminum
• Vented cap with right hand thread
• See below for availability of finishes
• Cap measures ³/₄ tall (from the gasket surface) and has a 4 ¹/₂ circumference at the spinners

V-FACTOR
Chrome Plated Spinner Gas Cap for 1982/Later style bung