Custom and Multi-Fit Tailights

Taillight/License Mount Asy Fxst,Fxwg 1980/1999,Cus Fatbob Fenders Bulb Type

• Steel license mount similar to the OE type, but designed for our custom taillight
• 12 volt taillight fits snugly under the at Bob rear fenders for a matching contour
• Can also be used for custom applications when used with our 22004 or our 22009 7 wide at Bob rear fenders

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight/ License Mount Kit with dual contact bulb (as shown)
Fits XWG & XST models 1980/1999
(Imported)

Tri-Bar Red LED Light W/Smoke Lens,06/L* Flhx,Also Fits 99/L* Flhr/Flt If #22980 Used

• Tri-bar running lights with high intensity red LEDs
• See below for availability of len's color
• Triple light bands are dual function: lights glow in running mode and increase in intensity when the brake is applied
• Kits include all the needed wiring, hardware and OE loom connectors

V-FACTOR
Red LED with smoke lens
Fits FLHX 2006/Later
Also fits FLHR/LT models 1999/Later when used in conjunction with the 22980 rear fender extension
(Imported)

V-Twin Manufacturing Chrome Rim Stock Type Taillight, 1955-72 FL-XL - Sold Each

Chrome stock type tail lamp lens trim rim.

OEM: 68086-55

FL 1955-1972
XL 1955-1972
FX 1971-1972

V-Twin Manufacturing Chrome Beehive Style Tail Lamp, 68002-39 - Sold Each
Chrome Beehive Style Tail Lamp OEM No: 68002-39 Chrome beehive 12 volt tail lamp with gasket and plate bracket. Has a stamped steel body. *NOTE: For show or decorative use only and are not D.O.T. approved. Fits: Custom

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.

V-FACTOR
Chrome Plated LED type Taillight Assembly only
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

V-Twin Manufacturing Red LED Lamp Fresno Chrome Teardrop Taillamp Assembly - Sold Each

Chrome die cast LED Fresno tear drop lamp with stainless plate bracket. Lamp is red LED type with red lens.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

Tech Note:

Recommended to use with

V-Twin Manufacturing Large Replica Lucas Lamp - Sold Each

Large Lucas style tail lamp for sport tail lamp assemblies. Tail lamp includes a 12 volt 23/8 watt clear bulb and a red lens.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Chrome Bates Bobber Tail Lamp Assembly - Sold Each
Tail lamp assembly is chrome and constructed by a gravity cast process. This tail lamp assembly features a glass lens and mounts on the fender. Brought back by Wyatt Gatling. Order tail lamp mount gasket separately. Fits: FL 1941-1947

V-Twin Manufacturing Flat Diamond LED Taillight - Sold Each

Flat back diamond style chrome LED lamp
Tail lamp measures 4-3/4" long X 2" high X 1" deep. Has a bolt pattern for use with a cat eye application.

Custom application

Tech Note:

Suggested to use with #33-0652 LED array

V-Twin Manufacturing Complete Chrome for Stock Type Taillight, 1955-72 FL-XL - Sold Each

Chrome tail lamp stock style includes plastic red lens, a 12 volt 23/8 watt clear bulb, lens housing and internals.
*NOTE: For show or decorative use only and is not D.O.T. approved.
OEM: 68010-64B

FL 1955-1972
XL 1955-1972
FX 1971-1

ALLOY ART Chrome Shooter Taillight Kit, Natural

• CNC-machined aluminum construction with mega-bright 1.25" dual-functions red LED clusters
• Quick-and-easy installation requires a 2" hole to be cut in bags
• Weather-tight light assemblies mount securely via an easy-to-use locking collar with rubber sealing gasket from the inside of the bag
• OEM style quick-disconnect electrical connectors for quick-and-easy bag removal
• Include two light assemblies, wiring with OEM-style electrical connectors and complete installation instructions
• Made in the U.S.A.

RUSS WERNIMONT DESIGNS Chrome L.E.D. Taillight/Turn Signal/License Plate Kit, LED, Dual function, Red, Aluminum, Fender-mount, Flat, Horizontal, Oval

• Chrome cast-aluminum license plate frame with an LED taillight and turn signal
• Brilliant starburst optics
• Three-color LED light system: red running/brake light, amber turn signals and white license plate light
• Accepts most 4" x 7" license plates
• Uses OEM plugs or can be spliced into existing wiring harness
• Requires the use of mounting pockets (sold separately)
• Can be used on OEM fenders, custom fenders or various custom applications
• Made in the U. S. A.

CHRIS PRODUCTS Chrome Taillight Assembly, White, Incandescent, DOT, Dual function, Red, made in the usa, number of bulbs 1, Each, Rear, specific application, Harley 73-98 FX 73-98 FL 73 - 98 XL

• Updated design
• Complete taillight assembly includes chrome base, Chris taillight lens, bulb, lens screws, lens gasket and terminal for ground wire
• For replacement bulbs, see page ???
• DOT compliant
• Made in the U.S.A.

Taillight,Led Curvature Style Uw/#11228,#11229,#11230,Or Cus Die Cast Cp 6"Lg X 1" W/Hardw

• The axle spacer/adjuster stop is incorporated into the license plate backing plate for a clean look
• Includes a special adapter that will allow for a ³/₄ O.D. axle or a 1 O.D. axle
• Hidden allen head lock screws secure the vertically mounted license plate from the backside furnishing you with a smooth, boltless look
• Mounts on left side (replaces axle spacer adjuster stop)
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Replacement Taillight Housing with Lens, LED light board, wires & mounting hardware
Fits Softail 1986/1999

Taillight/Lic Fender Mt LED Fits All 4X7 License Plates Cp Billet Alum Fits Fdr Profile

• Hidden allen head lock screws secure the license plate from the back furnishing you with a smooth, boltless look
• Included is a rubber mounting block and hardware for a no hassle installation
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License slides in from bottom
Fits flat or curved rear fender

Taillight/Lic Mt Side Axle Lh St 86/99,Uw 3/4" Or 1"Od Axle Horizontal Mt,Led Lights,Cp

• Includes a special adapter that will allow for a ³/₄ O.D. axle or a 1 O.D. axle
• The axle spacer/adjuster stop is incorporated into the license plate backing plate mount for a clean look
• Hidden allen head lock screws secure the license plate from the backside furnishing you with a smooth, boltless look
• Mounts on left side (replaces axle spacer adjuster stop)
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: Taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License plate slides in from bottom
Fits Softail 1986/1999
(Imported)

Taillight W/Turn Signals Custom App All Models,12V,Mtg Holes 2.5"Ctr...Cp Billet Alum

• CNC machined from billet aluminum
• This 12 volt taillight is the perfect complement for a at Bob style rear fender
• eatures built-in turn signals and includes a separate window that illuminates the license plate
• The taillight has a flat back and mounts on 2 1/2 centers
• 7 of taillight lead wire is included and the turn signals include 7 of wire
• Assembly measures 6 5/8 long x 3 tall x 1 13/16 thick

Note: This taillight assembly is not DOT approved and should be used accordingly. Due to the low amperage draw of the turn signals, to retain the blinker function we recommend using 15138 self-cancelling turn signal module with load equalizer or our 15137 turn signal load equalizer for models without self-cancelling systems.V-FACTOR
Chrome Plated Complete Taillightwith Turn Signals

Taillight Cus Fatbob Bulb Type Fits #13107 Or #13108 Mount & #11214 Or #11218 Assembly Cp

• Steel license mount similar to the OE type, but designed for our custom taillight
• 12 volt taillight fits snugly under the at Bob rear fenders for a matching contour
• Can also be used for custom applications when used with our 22004 or our 22009 7 wide at Bob rear fenders

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight Assembly only with dual contact bulb
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

Taillight,Custom Box Style For All Models 12 Volt Die Cast Chrome Plated

• Die cast housing with a flat back for easy mounting
• Drilled and tapped for use with ⁵/₁₆-18 mounting bolts on 2 centers
• Taillight measures 2 tall x 4 ¹/₄ wide and is 2 thick
• A clear license window is also provided
• Includes a 12 volt bulb with approximately 8 of lead wire

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight Assembly
(Imported)

Oe Taillight Asy Late Style Bt 73/98 St 84/99 Spt 73/98 Side Car 79/98 Rpls 68008-73B
Available with your choice of the OE style incandescent dual contact bulb or with the updated LED (light emitting diode) type lights. The bulb type uses a standard 1157 style light bulb and the LED type uses 80 individual LED lights. LED lights are unaffected by moisture or vibration and do not produce voltage robbing heat. They are also known for their extreme life span and draw only 9 watts of power as opposed to the 29 watts of power that the OE style bulb uses. Both 12 volt taillight assemblies include approximately 5 feet of lead wire (1994/Later fitment may need wire lead update) and mounting speed nuts. V-FACTOR
Chrome Plated Taillight Assembly
DOT Approved, Bulb type
Fits Big Twin 1973/1998, Softail 1984/1999 side cars 1979/1998 & Sportster 1973/1998
Replaces HD# 68008-7B
(Imported)

Taillight,Beehive Stk Style Big Twin 1939/1946 W/12 V Bulb Chromed..Replaces Hd 68002-39T

• Many universal mounting applications
• Includes 12 volt bulb, rubber gasket for mounting and license bracket

Note: This taillight is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight
Fits 1939/1946 models & custom applications
Replaces HD# 68002-39T
(Imported)

Taillight,Stock Style Early Cp Big Twin 1955/1972 Spt 1956/72 W/12 V Bulb..Rpls Hd 68010-64B

• Original style taillight in chrome
• Includes a 12 volt bulb and approximately 46 of lead wire

Note: This taillight is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight
Fits Big Twin 1955/1972, Sportster 1956/1972 & many custom applications
Replaces HD# 68010-64B
(Imported)

V-Twin Manufacturing Red Bulb Lamp Fresno Chrome Teardrop Taillamp Assembly - Sold Each

Chrome die cast 12 volt Fresno tear drop lamp with stainless plate bracket. Lamp is bulb type with red lens. Use the 3 license plate bracket.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

Tech Not

V-Twin Manufacturing Hummer w-Chr Hood TL Cpt. Early Taillights & Parts, 1947-55 - Sold Each

Chrome fender mount lamp kit with black plate bracket, chrome hood, red glass lens, a clear glass inner lens, and a dual filament 12 volt bulb.
Order 6 volt bulb separately, if needed.
OEM: 68001-47

Model 165 1947-1955
Model 125 1947-19

V-Twin Manufacturing Tail Lamp Kit K Style with Glass Lens, K 1952-1954 - Sold Each

Chrome k style lamp with black mount bracket, chrome hood, red tail lamp glass lens with a clear glass inner lens, and a dual filament 12 volt bulb.
Order 6 volt bulb separately, if needed.
OEM: 68007-52

K 1952-1954

V-Twin Manufacturing Complete Chrome Sport Taillight Assembly - Sold Each

Chrome sport lamp assembly with large Lucas lamp and built in plate bracket. Assembly includes a 12 volt 23/8 watt clear bulb and a red lens.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Stop Taillamp Round Style Kit - Kit

Chrome round STOP lamp kit includes black mounting bracket. Lamp has a 12 volt bulb design.

Custom application

V-Twin Manufacturing Stop Taillight Round Style - Sold Each

Round STOP style tail lamp includes a 12 volt 23/8 watt clear bulb with a red lens.
Tail lamp measures 2-3/4".

Custom application

Tech Note:

Suggested to use with #31-0874 bracket
Suggested to use with #33-1916 lens kit

V-Twin Manufacturing Round LED Tail Lamp with Smoked Lens - Sold Each
Round LED Tail Lamp with Smoked Lens LED round tail lamp is black with smoked lens includes a 2 bolt adjustable base mount. Does not have license plate light provisions. *NOTE: For show or decorative use only and is not D.O.T. approved. EC

V-Twin Manufacturing Round LED Tail Lamp with Smoked Lens - Sold Each
LED round tail lamp is chrome with smoked lens includes a 2 bolt adjustable base mount. Does not have license plate light provisions. *NOTE: For show or decorative use only and is not D.O.T. approved. ECE approved Fits: Custom applica

V-Twin Manufacturing LED Tail Lamp, 1999-2003 - Sold Each
LED clear lens tail lamp with wire end has a webbed design reflector with a bottom style tag light. Includes base, LED array, and wire. This tail lamp mounts to the original bracket. NOTE: D.O.T approved Fits: FXST 1999-20

V-Twin Manufacturing LED Tail Lamp - Sold Each
LED clear lens tail lamp with wire end has a webbed design reflector with a top style tag light. Includes base, LED array, and wire. The tail lamp mounts to the fender. NOTE: D.O.T approved Fits: FXST 1999-2003 XL 199

V-Twin Manufacturing Chrome. Bobber Tailmp - Sold Each

Sparto tail lamp chrome, bulb type mount to fender.

Custom application