Custom and Multi-Fit Tailights

Taillight/License Mount Asy Fxst,Fxwg 1980/1999,Cus Fatbob Fenders Bulb Type

• Steel license mount similar to the OE type, but designed for our custom taillight
• 12 volt taillight fits snugly under the at Bob rear fenders for a matching contour
• Can also be used for custom applications when used with our 22004 or our 22009 7 wide at Bob rear fenders

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight/ License Mount Kit with dual contact bulb (as shown)
Fits XWG & XST models 1980/1999
(Imported)

Tri-Bar Red LED Light W/Smoke Lens,06/L* Flhx,Also Fits 99/L* Flhr/Flt If #22980 Used

• Tri-bar running lights with high intensity red LEDs
• See below for availability of len's color
• Triple light bands are dual function: lights glow in running mode and increase in intensity when the brake is applied
• Kits include all the needed wiring, hardware and OE loom connectors

V-FACTOR
Red LED with smoke lens
Fits FLHX 2006/Later
Also fits FLHR/LT models 1999/Later when used in conjunction with the 22980 rear fender extension
(Imported)

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.

V-FACTOR
Chrome Plated LED type Taillight Assembly only
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

Taillight,Led Curvature Style Uw/#11228,#11229,#11230,Or Cus Die Cast Cp 6"Lg X 1" W/Hardw

• The axle spacer/adjuster stop is incorporated into the license plate backing plate for a clean look
• Includes a special adapter that will allow for a ³/₄ O.D. axle or a 1 O.D. axle
• Hidden allen head lock screws secure the vertically mounted license plate from the backside furnishing you with a smooth, boltless look
• Mounts on left side (replaces axle spacer adjuster stop)
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Replacement Taillight Housing with Lens, LED light board, wires & mounting hardware
Fits Softail 1986/1999

Taillight/Lic Fender Mt LED Fits All 4X7 License Plates Cp Billet Alum Fits Fdr Profile

• Hidden allen head lock screws secure the license plate from the back furnishing you with a smooth, boltless look
• Included is a rubber mounting block and hardware for a no hassle installation
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License slides in from bottom
Fits flat or curved rear fender

Taillight/Lic Mt Side Axle Lh St 86/99,Uw 3/4" Or 1"Od Axle Horizontal Mt,Led Lights,Cp

• Includes a special adapter that will allow for a ³/₄ O.D. axle or a 1 O.D. axle
• The axle spacer/adjuster stop is incorporated into the license plate backing plate mount for a clean look
• Hidden allen head lock screws secure the license plate from the backside furnishing you with a smooth, boltless look
• Mounts on left side (replaces axle spacer adjuster stop)
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: Taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License plate slides in from bottom
Fits Softail 1986/1999
(Imported)

Taillight W/Turn Signals Custom App All Models,12V,Mtg Holes 2.5"Ctr...Cp Billet Alum

• CNC machined from billet aluminum
• This 12 volt taillight is the perfect complement for a at Bob style rear fender
• eatures built-in turn signals and includes a separate window that illuminates the license plate
• The taillight has a flat back and mounts on 2 1/2 centers
• 7 of taillight lead wire is included and the turn signals include 7 of wire
• Assembly measures 6 5/8 long x 3 tall x 1 13/16 thick

Note: This taillight assembly is not DOT approved and should be used accordingly. Due to the low amperage draw of the turn signals, to retain the blinker function we recommend using 15138 self-cancelling turn signal module with load equalizer or our 15137 turn signal load equalizer for models without self-cancelling systems.V-FACTOR
Chrome Plated Complete Taillightwith Turn Signals

Taillight Cus Fatbob Bulb Type Fits #13107 Or #13108 Mount & #11214 Or #11218 Assembly Cp

• Steel license mount similar to the OE type, but designed for our custom taillight
• 12 volt taillight fits snugly under the at Bob rear fenders for a matching contour
• Can also be used for custom applications when used with our 22004 or our 22009 7 wide at Bob rear fenders

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight Assembly only with dual contact bulb
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

Taillight,Custom Box Style For All Models 12 Volt Die Cast Chrome Plated

• Die cast housing with a flat back for easy mounting
• Drilled and tapped for use with ⁵/₁₆-18 mounting bolts on 2 centers
• Taillight measures 2 tall x 4 ¹/₄ wide and is 2 thick
• A clear license window is also provided
• Includes a 12 volt bulb with approximately 8 of lead wire

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight Assembly
(Imported)

Oe Taillight Asy Late Style Bt 73/98 St 84/99 Spt 73/98 Side Car 79/98 Rpls 68008-73B
Available with your choice of the OE style incandescent dual contact bulb or with the updated LED (light emitting diode) type lights. The bulb type uses a standard 1157 style light bulb and the LED type uses 80 individual LED lights. LED lights are unaffected by moisture or vibration and do not produce voltage robbing heat. They are also known for their extreme life span and draw only 9 watts of power as opposed to the 29 watts of power that the OE style bulb uses. Both 12 volt taillight assemblies include approximately 5 feet of lead wire (1994/Later fitment may need wire lead update) and mounting speed nuts. V-FACTOR
Chrome Plated Taillight Assembly
DOT Approved, Bulb type
Fits Big Twin 1973/1998, Softail 1984/1999 side cars 1979/1998 & Sportster 1973/1998
Replaces HD# 68008-7B
(Imported)

Taillight,Beehive Stk Style Big Twin 1939/1946 W/12 V Bulb Chromed..Replaces Hd 68002-39T

• Many universal mounting applications
• Includes 12 volt bulb, rubber gasket for mounting and license bracket

Note: This taillight is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight
Fits 1939/1946 models & custom applications
Replaces HD# 68002-39T
(Imported)

Taillight,Stock Style Early Cp Big Twin 1955/1972 Spt 1956/72 W/12 V Bulb..Rpls Hd 68010-64B

• Original style taillight in chrome
• Includes a 12 volt bulb and approximately 46 of lead wire

Note: This taillight is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight
Fits Big Twin 1955/1972, Sportster 1956/1972 & many custom applications
Replaces HD# 68010-64B
(Imported)