Drag and Beach Bars

V-Twin Manufacturing Drag Handlebar with Indents - Sold Each
Drag Handlebar with Indents

Pull Back: 3"

Width Tip To Tip: 29-1/2"

Knurl: 2"

Bar Diameter: 1"

Center Width: 8-1/2"

DRAG SPECIALTIES Gloss Black Beach Bar 1" Touring Handlebars, center width 7.75", drilled, end rise rise height 4.5", overall width 36", pullback sweep 14.25", specific application, Harley 08-16 FL

• Steel tubing with a chrome-plated or gloss black finish
• Wide variety of bends so you get that just-right fit and feel
• Available with dimples in a smooth, unknurled style unless noted
• Made in the U.S.A.

Drag Style Handlebar,Black 1982/Later*,30" Wide,1" Dia Dimpled

• High quality drag bars
• 30 wide, 1 diameter
• See below for availability of finish and type

V-FACTOR
Black Drag Bar, Dimpled
Fits most applications

V-Twin Manufacturing Chrome Beach Bar 39"x5" w-o Indents - Sold Each

1" chrome handlebar without indents

FL 1974-1981
FX 1974-1981
XL 1974-1981

V-Twin Manufacturing Superbar 1" w-Indent, Chrome, 29 - Sold Each

Chrome 1" handlebar Super Bar style has indents for external wiring and knurls.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

M

DRAG SPECIALTIES Chrome Buffalo Bagger-Style Ape Hanger 1 1/4" Handlebars, Natural, pullback sweep 8"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

Handlebar,Custom Drag Style 1982/L* 26"Wide 5-1/2"Pullback 8-1/2"Ctr W/Crimp

• Fits 1982/Later models including ly-By-Wire
• 1 1/2 diameter
• 5 pull back
• Drilled for internal wiring
• V-FACTOR
• Drag Bar
• Chrome Plated
• Width: 26
• Rise: --
• Pullback: 5 ¹/₂
• Center Width: 8 ¹/₂
• 1982/Later
• (Imported)

V-Twin Manufacturing Drag Bar with Indents - Sold Each

1" handlebar feature 2" spacing with knurls at the riser area and indents for wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-20

V-Twin Manufacturing Drag Bar with Indents, 4" Pullback - Sold Each
OEM No: 56558-95 Chrome 1" drag style handlebar has knurls that are 2" apart, and is indented for external wiring. Fits: FL 1982-1984 FX 1982-1984 XL 1982-UP FLST 1986-UP FXST 1984-UP FXR 1982-1994 FXD 19

V-Twin Manufacturing 1" x 30" Drag Bar with indents, 30ø bend - Sold Each

Drag handlebars with indents are sweep back angle type with a 30A, bend.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

V-Twin Manufacturing 1"x15"Degree Drag Bar, 1988-up FXSTS - Sold Each
Drag Handlebar with Indents 1" Drag handlebars with indents are sweep back angle style with a 15A, bend. These are without knurls. Drag handlebars have been seen on bikes for years. Drag bars give outstanding control of your bike. If you ha

V-Twin Manufacturing Replica Bar fit 2007 FXD-FLSTF Drag - Sold Each

1-1/4" handlebar with indents for external wiring.
These handlebars are 1-1/4" at the riser area and require 1-1/4" inner diameter handlebar riser.
OEM: 56959-08

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP

V-Twin Manufacturing MCM Superbar, Chrome w-o Indent, 29 - Sold Each

1" chrome handlebar with knurls. Both sides accept spiral controls.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Rise To Grip Tip: 5"
Rise To Center: 1-1/2"
Pull Back: 4"
Width Tip To Tip: 29-1/2"
Knurl

V-Twin Manufacturing 1" Drag Bars w-o Indents,. 15 - Sold Each

Drag Handlebars without indents are sweep back angle style with a 15A, bend.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Rise To Grip Tip: 2-1/2"
Pull Back: 11"
Width Tip To Tip: 29-1/2"
Knurl: 2"
Bar D

V-Twin Manufacturing MCM Drag Bars w-Indent w-o Knurl, 28.5 - Sold Each

Chrome 1" handlebar Drag style has indents for external wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

Measurements:

V-Twin Manufacturing Drag Bar w-Indent, 36 - Sold Each

1" handlebar feature knurls at the riser area and indents for external wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

Me

V-Twin Manufacturing Drag Handlebar with Indents - Sold Each

1" handlebar feature knurls at the riser area and indents for wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

Measurement

V-Twin Manufacturing Drag Bar w-0 Indents, 36 - Sold Each

1" handlebar are Smooth type that feature knurls at the riser area.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Pull Back: 4-1/2"
Width Tip To Tip: 36"
Knurl: 2"
Bar Diameter: 1"
Center Width: 12"

V-Twin Manufacturing 32 1-2" Drag Bar w-o Indents - Sold Each

1" handlebar Smooth type feature knurls at the riser area without indents.

FL 1974-1981
FX 1974-1981
XL 1974-1981

Measurements:

Pull Back: 5-1/2"
Width Tip To Tip: 32-1/2"
Knurl: 2"
Bar Diameter: 1"
Center Widt

V-Twin Manufacturing 5-1/2" Drag Handlebar with Indents - Sold Each
5-1/2" Drag Handlebar with Indents Chrome 1" handlebar is a drag style with indents for wiring and knurls. Fits Harley-Davidson models: FL 1982-1984 FX 1982-1984 XL 1982-UP FLST 1986-UP FXST 1984-UP FXR

V-Twin Manufacturing Chrome Knuckle Handlebar 1-1/4" - Sold Each

1-1/4" chrome knucklebar with indents are pre drilled for internal wiring.

Custom Springer Front End Applications

Measurements:

Pull Back: 4-1/2"
Width Tip To Tip: 30"
Knurl: 2"
Bar Diameter: 1-1/4"