Drag Specialties

EBC Main Jet Assortment For Keihin CV Carb, Each, size 160 - 220

• High-precision brass carburetor jets
• Jets are flow-calibrated for extremely accurate fuel flow rate
• Kit includes two jets of the following sizes: 160, 165, 170, 175, 180, 185, 190, 195, 200, 205, 210 and 220
• Replacement jets available in 2-pack

MIKUNI HSR45 Smoothbore Carb Kit, 84-89 Models Require CV-Style Manifold, Flanges and Seals., Harley 84-00 FX 86-99 FL 87 - 94 XL

• Kits include the 42mm/45mm smoothbore carb in a natural finish
• Easier, faster installation using stock CV throttle cables
• Excellent throttle response, more power, improved acceleration and better gas mileage
• Order fewer part numbers to cover more applications
• HSR smoothbore carbs offer excellent throttle response and control
• Well made for years of dependable service
• See page ??? for additional main and pilot jets
• Installation instructions and hardware included
• Made in Japan

MIKUNI Genuine Mikuni Rebuild Kit For HSR42/45 Carbs

• Genuine Mikuni parts properly replace worn or mistreated components for HSR42/45/48 carburetors
• Include top cover gasket, jet needle E-ring and washer, throttle valve seal, pilot air O-ring, fuel joint O-ring, accelerator pump O-ring, needle valve O-ring, needle valve retainer screw, needle valve assembly, float bowl O-ring/gasket, overflow hose, float bowl screws, accelerator pump rod boot
• Includes all the parts needed to rebuild HSR42/45 or HSR48 carburetors

EASTERN MOTORCYCLE PARTS Cam Shims, 5-pack, size .045", Harley 71-00 FX 41-99 FL 87 - 94 XL

• Available in a set of 10, or in individual sizes in 5-pack
• Made in the U.S.A.

NAMZ Starter Solenoid Connector, Female, made in the usa, Each, pins per connector 1

• Female one-position connector
• Connects wire to starter solenoid
• Made in the U.S.A.

NAMZ JST Mini Connector, White, Male, Each, pins per connector 4

• Small and watertight connector system
• Designed for 22-gauge wire
• Include wire seals; crimping terminal tools available separately
• Made in the U.S.A.

NAMZ JST Mini Connector Terminals, Female

• Small and watertight connector system
• Designed for 22-gauge wire
• Include wire seals; crimping terminal tools available separately
• Made in the U.S.A.

NAMZ Gray Deutsch DT Sealed Connector, Receptacle, Each, pins per connector 6

• Refill your Deutsch Builder Kits with these connector components
• Each connector features a silicon rubber seal to reduce corrosion and moisture
• The same connectors, receptacles and plugs used on factory wiring harnesses
• Available with black or gray housings
• Pins and sockets feature closed or open crimp-style ends
• Can also be used for replacement in OEM connectors
• Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately
• Receptacles and plugs come complete with required locks; sold each
• Made in the U.S.A.

NAMZ Gray Deutsch DT Sealed Connector, Receptacle, Each, pins per connector 3

• Refill your Deutsch Builder Kits with these connector components
• Each connector features a silicon rubber seal to reduce corrosion and moisture
• The same connectors, receptacles and plugs used on factory wiring harnesses
• Available with black or gray housings
• Pins and sockets feature closed or open crimp-style ends
• Can also be used for replacement in OEM connectors
• Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately
• Receptacles and plugs come complete with required locks; sold each
• Made in the U.S.A.

NAMZ Gray Deutsch DT Sealed Connector, Plug, Each, pins per connector 6

• Refill your Deutsch Builder Kits with these connector components
• Each connector features a silicon rubber seal to reduce corrosion and moisture
• The same connectors, receptacles and plugs used on factory wiring harnesses
• Available with black or gray housings
• Pins and sockets feature closed or open crimp-style ends
• Can also be used for replacement in OEM connectors
• Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately
• Receptacles and plugs come complete with required locks; sold each
• Made in the U.S.A.

NAMZ Gray Deutsch DT Sealed Connector, Plug, Each, pins per connector 3

• Refill your Deutsch Builder Kits with these connector components
• Each connector features a silicon rubber seal to reduce corrosion and moisture
• The same connectors, receptacles and plugs used on factory wiring harnesses
• Available with black or gray housings
• Pins and sockets feature closed or open crimp-style ends
• Can also be used for replacement in OEM connectors
• Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately
• Receptacles and plugs come complete with required locks; sold each
• Made in the U.S.A.

NAMZ Black Deutsch DT Sealed Connector, Receptacle, Each, pins per connector 6

• Refill your Deutsch Builder Kits with these connector components
• Each connector features a silicon rubber seal to reduce corrosion and moisture
• The same connectors, receptacles and plugs used on factory wiring harnesses
• Available with black or gray housings
• Pins and sockets feature closed or open crimp-style ends
• Can also be used for replacement in OEM connectors
• Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately
• Receptacles and plugs come complete with required locks; sold each
• Made in the U.S.A.

NAMZ Black Deutsch DT Sealed Connector, Plug, Each, pins per connector 6

• Refill your Deutsch Builder Kits with these connector components
• Each connector features a silicon rubber seal to reduce corrosion and moisture
• The same connectors, receptacles and plugs used on factory wiring harnesses
• Available with black or gray housings
• Pins and sockets feature closed or open crimp-style ends
• Can also be used for replacement in OEM connectors
• Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately
• Receptacles and plugs come complete with required locks; sold each
• Made in the U.S.A.

NAMZ Black AMP Multi-Lock Connector, 5-pack, Plug, pins per connector 2

• AMP Multi-Lock connectors are the direct Harley-Davidson replacements that have been used since 1996
• These non-waterproof connectors are used on every factory model
• Includes all necessary wire seals, wedgelocks and crimp terminals
• Includes eight 8-position plugs, eight 6-position plugs, eight 4-position plugs, eight 3-position plugs, eight 2-position plugs and 100 terminals for plugs and caps
• Connectors also available in packs of five or individually
• Crimp terminals are sold separately
• Made in the U.S.A.

NAMZ AMP Mate-N-Lock Connector, pins per connector 6, Harley 71-95 FX 71-95 FL 71 - 94 XL

• Top-quality OEM-style replacement connectors and terminals
• Easy to use
• Sold each unless noted
• Made in the U.S.A.

NAMZ AMP Mate-N-Lock Connector, pins per connector 10, Harley 71-95 FX 71-95 FL 71 - 94 XL

• Top-quality OEM-style replacement connectors and terminals
• Easy to use
• Sold each unless noted
• Made in the U.S.A.

NAMZ AMP Mate-N-Lock Connector, pins per connector 1, Harley 71-95 FX 71-95 FL 71 - 94 XL

• Top-quality OEM-style replacement connectors and terminals
• Easy to use
• Sold each unless noted
• Made in the U.S.A.

NAMZ AMP Mate-N-Lock Connector, Female, pins per connector 6, Harley 71-95 FX 71-95 FL 71 - 94 XL

• Top-quality OEM-style replacement connectors and terminals
• Easy to use
• Sold each unless noted
• Made in the U.S.A.

NAMZ AMP Mate-N-Lock Connector, Female, pins per connector 10, Harley 71-95 FX 71-95 FL 71 - 94 XL

• Top-quality OEM-style replacement connectors and terminals
• Easy to use
• Sold each unless noted
• Made in the U.S.A.

NAMZ AMP Mate-N-Lock Connector, Female, pins per connector 1, Harley 71-95 FX 71-95 FL 71 - 94 XL

• Top-quality OEM-style replacement connectors and terminals
• Easy to use
• Sold each unless noted
• Made in the U.S.A.

NAMZ Tour Pak Plug-And-Play Rear Speaker Harness, Harley 10-13 FL

• Rear speaker harness PART #2120-0628 allows installation of rear speakers with OEM Harmon Kardon radio; features OEM-type 35-pin connector
• Tour-Pak plug-and-play rear speaker harness PART #s 2120-0630 and 2120-0770 fits all models with a Harmon Kardon radio and using a factory speaker-equipped Tour-Pak; allows the use of Tour-Pak audio controls
• Made in the U.S.A.

NAMZ Auxiliary Lamp Wiring Harness, made in the usa, Each

• Allows mounting of late-style 41/2" auxiliary lamps equipped with spade connectors on pre-05 models
• Sold each
• Requires two harnesses
• Made in the U.S.A.

THUNDERMAX Electronic Harness Controller, made in the usa, Each

• Compact design makes it easy to hide on a custom motorcycle
• Performs all fuse, relay and signal-canceling functions in one simple package
• Allows a dual-filament bulb to be used in three ways: tail, brake and turn signal (excluding the need for a center brake light); includes ribbon cable for integrating generic indicator lights
• Weather-resistant connections for trouble-free use in extreme environments
• Trim-to-fit harnesses allow installation on most custom bikes

NAMZ Ready-To-Install Handlebar Extension Harness, length +4", Harley 11-16 FX 11-16 FL 14 - 16 XL

• All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches
• Harnesses include both male and female Molex terminals crimped on each end
• Kits for all except FLHT and FLT models include wire heat shrink, a length of 3/8" heat shrink and color-matching wire
• Kits for FLHT and FLT models include wire heat shrink, a length of 1/2" heat shrink and color-matching wire
• Made in the U.S.A.

S&S CYCLE Compression Release Silicone Solenoid Cap, Pair

• Available in electric or manual styles for S&S heads that accept compression releases
• Electric compression releases open when you press the start button and close when the button is released
• Manual compression releases are opened manually and close when the motor starts
• Kits include the required parts for installation
• For ease of installation and removal, a special socket can be purchased separately
• Not for use on OEM heads
• Made in the U.S.A.

NAMZ Dual-Spade Circuit Breaker, 15A

• Available in 10, 15, 20 or 30A
• Sold individually
• Made in the U.S.A.

RICK'S MOTORSPORT ELECTRIC Stator, Buell 08-08

• High-quality components meet or exceed OEM specs
• PART #2112-0989 is made with a higher temperature wire to provide longevity and combat the premature burning/failure issue
• A hole in the rotor allows more oil into it to cool the stator

Buell 08-08 1125R

SPYKE Heavy-Duty Starter Drive Clutch, Stealth, Supertorque, 1.4kW, Harley 90-06 FX 90-06 FL 90 - 94 XL

• Comes complete with bearing and drive clutch
• Direct OEM replacement
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Platinum Cut Scallop Derby Cover, Black, Natural, Harley 99-16 FX 99-16 FL

• Complete matching line
• Direct replacement for stock derby covers on OEM primaries
• Machined Performance Machine logo
• Scallop or Drive design
• Available in chrome, Contrast Cut, Black Ops and Platinum-Cut finish (smooth black anodized surface with polished machined accents)
• Hardware and gasket included
• Made in the U.S.A.

BELT DRIVES LTD. Replacement Outboard Bearing

• For use on BDL Belt Drive clutches

EASTERN MOTORCYCLE PARTS Clutch Hub Nut, Harley 91 - 03 XL

• High-quality steel construction
• Sold individually
• Made in the U.S.A.

EASTERN MOTORCYCLE PARTS Clutch Hub Bearing, made in the usa, Harley 90-10 FX 90-10 FL 90 - 94 XL

• High-quality replacement component
• Sold each