Name: COMETIC Clutch Cover Gasket, Kawasaki 86-12
Brand: Cometic
SKU: DS-09343993
Price: 23.95 USD
Availability: InStock

Cometic

COMETIC Clutch Cover Gasket, Kawasaki 86-12

DS-09343993

$23.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Kawasaki 07-12

DS-09344000

$20.95

In Stock

Shipping calculated at checkout.

COMETIC Stator Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Kawasaki 06-10

DS-09343997

$30.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Yamaha 06-14

DS-09343994

$21.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Kawasaki 06-14 ZX-14 Ninja

DS-09343995

$24.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Yamaha 06-14

DS-09343992

$16.95

In Stock

Shipping calculated at checkout.

COMETIC Stator Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Honda 71-78

DS-09343991

$15.95

In Stock

Shipping calculated at checkout.

COMETIC Stator Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Suzuki 96-00

DS-09343989

$7.95

In Stock

Shipping calculated at checkout.

COMETIC Stator Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Yamaha 89-99

DS-09343987

$7.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Kawasaki 95-02

DS-09343985

$8.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Kawasaki 90-05

DS-09343984

$8.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Honda 91-07

DS-09343980

$10.95

In Stock

Shipping calculated at checkout.

COMETIC Stator Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Suzuki 88-06

DS-09343975

$8.95

In Stock

Shipping calculated at checkout.

COMETIC Stator Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator/Magneto Cover Gasket, Each, Gasket, Magneto Base, Stator Gasket, Kawasaki 73-83

DS-09343971

$7.95

In Stock

Shipping calculated at checkout.

COMETIC Stator/Magneto Cover Gasket, made in the usa, Each, specific application, Gasket, Magneto Base, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC GASKET Exhaust Suzuki, Set, Exhaust Gasket, Kawasaki 95-02, Suzuki 89-92, Yamaha 89-05

DS-09343959

$27.95

In Stock

Shipping calculated at checkout.

COMETIC GASKET EXHAUST Suzuki, made in the usa, Set, specific application, Exhaust Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Exhaust Gasket, Set, Suzuki 93-14

DS-09343969

$44.95

In Stock

Shipping calculated at checkout.

COMETIC Exhaust Gasket, made in the usa, Set, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Each, Gasket, OEM Kawasaki 73-83

DS-09343970

$7.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, Each, specific application, Gasket, OEM Replacement

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Lower End Kit, bore size 65mm, 67.5mm, 68mm, 70mm, 72mm, Gasket, Gasket Kit, Honda 71-78

DS-09343947

$56.95

In Stock

Shipping calculated at checkout.

COMETIC Lower End Kit, bore size 65mm, 67.5mm, 68mm, 70mm, 72mm, made in the usa, specific application, Gasket, Gasket Kit

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Head Gasket, thickness .027", Ducati 07-08

DS-09343913

$102.95

In Stock

Shipping calculated at checkout.

COMETIC Head Gasket, made in the usa, specific application, thickness .027"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Base Gasket, bore size 81mm, 83mm, 84mm, Steel, thickness .010", Suzuki 99-14

DS-09343886

$36.95

In Stock

Shipping calculated at checkout.

COMETIC Base Gasket, bore size 81mm, 83mm, 84mm, made in the usa, Steel, specific application, thickness .010"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Lower End Gasket Kit, bore size 68mm, 70mm, Suzuki 06-14

DS-09343883

$54.95

In Stock

Shipping calculated at checkout.

COMETIC Lower End Gasket Kit, bore size 68mm, 70mm, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Head Gasket, bore size 70mm, thickness .018", Suzuki 06-14 GSX-R750

DS-09343858

$123.95

In Stock

Shipping calculated at checkout.

COMETIC Head Gasket, bore size 70mm, made in the usa, specific application, thickness .018"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Head Gasket, bore size 68mm, thickness .027", Yamaha 06-14

DS-09343849

$123.95

In Stock

Shipping calculated at checkout.

COMETIC Head Gasket, bore size 68mm, made in the usa, specific application, thickness .027"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Lower End Gasket, bore size 84mm, thickness .018", Head Gasket, Kawasaki 06-14

DS-09343853

$68.95

In Stock

Shipping calculated at checkout.

COMETIC Lower End Gasket, bore size 84mm, made in the usa, specific application, thickness .018", Head Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC LOWER END GASKET KIT, Suzuki 03-06

DS-09343817

$54.95

In Stock

Shipping calculated at checkout.

COMETIC LOWER END GASKET KIT, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC LOWER END GASKET KIT, Yamaha 04-08

DS-09343816

$34.95

In Stock

Shipping calculated at checkout.

COMETIC LOWER END GASKET KIT, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Head Gasket, bore size 68mm, thickness .027", Kawasaki 03-06

DS-09343818

$103.95

In Stock

Shipping calculated at checkout.

COMETIC HEAD GASKET, bore size 68mm, made in the usa, specific application, thickness .027"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC LOWER END GASKET KIT, Yamaha 03-05

DS-09343811

$36.95

In Stock

Shipping calculated at checkout.

COMETIC LOWER END GASKET KIT, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC LOWER END GASKET KIT, Kawasaki 03-08

DS-09343813

$68.95

In Stock

Shipping calculated at checkout.

COMETIC LOWER END GASKET KIT, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC LOWER END GASKET KIT, Kawasaki 04-05

DS-09343810

$49.95

In Stock

Shipping calculated at checkout.

COMETIC LOWER END GASKET KIT, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Head Gasket, bore size 73mm, thickness .030", Suzuki 00-05

DS-09343798

$103.95

In Stock

Shipping calculated at checkout.

COMETIC HEAD GASKET, bore size 73mm, made in the usa, specific application, thickness .030"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Head Gasket, bore size 84mm, Steel/Viton, thickness .030", Suzuki 99-14

DS-09343793

$103.95

In Stock

Shipping calculated at checkout.

COMETIC HEAD GASKET, bore size 84mm, made in the usa, specific application, thickness .030"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures