Drag Specialties

MOTION PRO Syncpro Carburetor Tuner, Carburetor Tuner/Synchronizer

• Precise four-channel vacuum indicator designed specifically for intake synchronization of engines with multiple carburetors or throttle bodies
• Mercury-free design
• For use with any two-, three- or four-cylinder 4-stroke engines
• Spill-proof design means the tool can be stored in a horizontal or vertical position
• Easy-to-read scale for precise synchronization
• Unaffected by barometric pressure changes
• Includes hang hook to clip onto the handlebars for easy use
• Rugged, impact-resistant ABS enclosure with convenient storage area for adapters, etc.
• Rubber feet on enclosure bottom help prevent sliding
• Includes manometer fluid, hoses, 5mm adapters, in-line restrictors and instructions
• 5mm adapters are used on many Honda and Suzuki models
• Optional 6mm adapters are available for use on most Yamaha models
• Most Kawasaki models do not need adapters
• Patent pending

EBC Clutch Tool, specific application

• Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance
• Highly compressed construction avoids swell and clutch drag
• Ideal for general-purpose street/sport/touring bikes
• Kit includes complete engine set of friction plates only

CKF CLUTCH KITS

• Kits have carbon-fiber impregnated friction plates
• Tough clutch plates extend engine life, improve drive, increase the heat threshold of the clutch and improve rider feel
• Available for select applications, see chart

DRC SERIES CLUTCH KITS

• Built with swaged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging"
• Complete engine set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height
• Not for use with 100% synthetic oil
• Allow modulation, unlike paper clutches which tend to snatch
• Anti-swell, alloy impregnated heavy-duty cork-based facings for smooth clutch take-up

DRCF SERIES CLUTCH KITS

• Ideal for use in 4-stroke, high-torque engine applications; great upgrade for 2-stroke performance applications
• Feature carbon-fiber lined clutch friction plates, a full set of steel plates and heavy-duty clutch springs
• Heavy-duty clutch kit designed for hard use and race applications

CSK CLUTCH SPRING SETS

• Sold in engine sets
• EBC springs are 10% stiffer than stock
• It is recommended you replace springs when changing clutch plates

CLUTCH REMOVAL TOOL

• Aids in unlocking clutch retainer bolts
• Speeds clutch removal

EBC Clutch Tool, specific application

• Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance
• Highly compressed construction avoids swell and clutch drag
• Ideal for general-purpose street/sport/touring bikes
• Kit includes complete engine set of friction plates only

CKF CLUTCH KITS

• Available for select applications, see chart
• Kits have carbon-fiber impregnated friction plates
• Tough clutch plates extend engine life, improve drive, increase the heat threshold of the clutch and improve rider feel

DRC SERIES CLUTCH KITS

• Complete engine set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height
• Anti-swell, alloy-impregnated heavy-duty cork-based facings for smooth clutch take-up
• Built with swagged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging"
• Allow modulation, unlike paper clutches that tend to snatch

DRCF SERIES CLUTCH KITS

• Feature carbon-fiber lined clutch friction plates, a full set of steel plates and heavy-duty clutch springs
• Heavy-duty clutch kit designed for hard use and race applications
• Ideal for use in 4-stroke, high-torque engine applications; great upgrade for 2-stroke performance applications

CSK CLUTCH SPRING SETS

• EBC springs are 10% stiffer than stock
• Sold in engine sets
• It is recommended you replace springs when changing clutch plates

CLUTCH REMOVAL TOOL

• Aids in unlocking clutch retainer bolts
• Speeds clutch removal

KIBBLEWHITE Valve Guide Ball Hone 5.5mm, made in the usa, Each

• Durable enough to size C630 bronze and cast iron valve guide materials
• Available from 4mm up to 3/8" widths
• Sold each
• Made in the U.S.A.

MOTUL 300V Synthetic 5W30 Motor Oil - 1 Liter, Each

• Ester technology's two types of esters provide excellent lubricity, better engine response and maximum engine rpm
• For use in all high performance 4-stroke engines
• % shear loss on Bosch ASTM D6278 test
• Passes JASO T94 wet clutch compatibility test
• Liter bottles, 12 per case; 4-liter bottles, 4 per case; sold each

EMGO Travel Trunk, Black, lockable, Plastic, Tail Bag

• Constructed of durable black ABS plastic
• Designed to mount on most luggage racks
• Includes mounting hardware, lock and two keys
• Measures 12" L x 161/2" W x 11" D

SADDLEMEN S4 Universal Saddlebag Support Brackets, Silver, Chrome, Solid, Steel, Pair

• Designed to attach/detach all Saddlemen saddlebags and any rigid-back aftermarket and OEM saddlebags with a twist of the QTL (Quarter Turn Locking) fasteners
• Complete kit includes docking posts and fasteners, turn signal relocator and support bracket
• For specific applications, components are also sold individually; see descriptions below
• Docking posts and fasteners replace fender strut bolts and allow you to put on or take off saddlebags with a quick twist of the QTL (Quarter Turn Locking) fasteners; includes four docking posts with fasteners, spacers, saddlebag grommets, support clips, nuts/bolts/fasteners needed and instructions
• Docking post kit should be used in conjunction with Saddlemen saddlebag support bracket; can be used to mount OEM H-D and H-D accessory saddlebags (except 12S bags) without purchase of additional bracket
• Support bracket kit includes two chrome-plated steel saddlebag supports and comes with an assortment of 5/16" and 3/8" fasteners in lengths to fit the most popular H-D models and aftermarket accessories
• Two types of turn signal relocation kits available: universal kit moves rear turn signals to the license plate mount and specific-fit kits relocate stock turn signals further back by extending the chrome fender rail

BOLT Hex Head Flange Fuji Style Metal Locking Nuts, made in the usa, Replacement, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Hex Head Flange Fuji Style Metal Locking Nuts, made in the usa, Replacement, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Hex Head Flange Fuji Style Metal Locking Nuts, made in the usa, Replacement, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Low-Profile Dimpled 10mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Low-Profile Dimpled 10mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Low-Profile Dimpled 10mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

WSM Stainless Steel Mini Clamp, Natural, made in the usa, Each, size 1/2" - 1 1/2"

• Stainless steel mini clamps for many applications
• Sold each

K&S TECHNOLOGIES F.E.W. Ignition Points Set, specific application
K&S TECHNOLOGIES F.E.W. Ignition Points Set, specific application, Honda 72-77, Suzuki 77-79

MOOSE RACING Spark Plug Caddy, Pair, Spark Plug Carrier

• Impact-resistant plastic design fits snugly around spare spark plug
• Perfect for fanny pack or fender bag
• Keep plugs clean and gapped
• Sold in pairs

ZERO GRAVITY Dark Smoke SR Series Windscreen, made in the usa, specific application, Replacement

• All Zero Gravity windscreens offer superior optical quality, strength plus flexibility, exceptional fit and finish, plus race-proven performance
• SR SERIES
• Zero Gravity's stock replacement line of sportbike windscreens
• Shaped like the original OEM screens that come stock from the factory
• Pre-drilled and designed to fit OEM fairing with precision using your stock mounting fasteners
• DOUBLE BUBBLE
• Developed by Zero Gravity R D in 1995 for Team ZG's race bikes, the Double Bubble is now seen on race tracks around the world
• Formed with a wedge-shaped bubble in the center of the windscreen, the Double Bubble was originally designed to provide superior aerodynamics for a rider tucked in behind the windscreen
• Adds a sleek, aerodynamic look to the exciting designs of today's new sportbikes
• SPORT TOURING
• Designed to reduce the windblast on the sport touring rider and provide more comfort while in the upright riding position
• Raise the point at which the wind hits the rider by several inches to significantly reduce the windblast
• Buffeting and other aerodynamic considerations will vary according to the riders' physical dimensions
• Made to the highest Zero Gravity standards, each Sport Touring screen is designed to enhance the look of the bike as well as provide better rider comfort
• Made in the U.S.A.

K&S TECHNOLOGIES Turn Signal Wire Adapter, Pair, specific application, Replacement, Turn Signal Adapter

• Eliminate the need to cut and splice wiring when using aftermarket turn signals or marker lights
• Plug into the OEM turn signal plug and then use pin connectors used on aftermarket lights
• Sold in pairs

K&S TECHNOLOGIES FLASHER RELAY 12V 2PIN

• PART #2020-0063 12V electronic-type 2-pole flasher relay with a maximum of 20A
• PART #2020-0064 12V electronic-type 3-pole flasher relay with a maximum of 20A

EMGO Bates-Style 4, size 4 1/2", Lamp, Spotlight

• Popular custom bottom mount spotlamp of years past
• Includes blue indicator jewel on top of shell
• Complete unit with sealed beam 4 1/2" bulb and 16" external wiring leads
• Sold each

EMGO Chrome 5 3/4" Lucas-Style Side-Mount Headlight Shells, Headlight Housing

• Scaled down version of the Lucas styled 7" headlight shells
• Available in chrome and gloss black shell with chrome rim
• Complete with a bottom hole in rear of shell for wiring routing
• Has copper ground spade secured to inside of shell as well as wire loom retainers
• Will accept most 5 3/4" sealed beam headlights and LED head lights
• Uses 5/16-24 mounting bolts (not included)
• Includes headlight shell and rim

EMGO Black 5 3/4" Lucas-Style Side-Mount Headlight Shell, Headlight Housing

• Scaled down version of the Lucas styled 7" headlight shells
• Available in chrome and gloss black shell with chrome rim
• Complete with a bottom hole in rear of shell for wiring routing
• Has copper ground spade secured to inside of shell as well as wire loom retainers
• Will accept most 5 3/4" sealed beam headlights and LED head lights
• Uses 5/16-24 mounting bolts (not included)
• Includes headlight shell and rim

COBRA Radiator Cover, Chromed, made in the usa, Steel, specific application

• Chromed high-grade steel
• Laser-cut designs to match original bike
• Hide stock radiator welds and mounting
• Precision fit
• Made in the U.S.A.

K&S TECHNOLOGIES Standard-Pressure Radiator Cap, Black

• Available in zinc-plated (gold), black and chrome finishes
• High-temperature silicone seals
• Stock-pressure rating of 16 psi (1.1 bar)
• PART #s 1903-0008 and 1903-0009 are stamped with metric pressure rating of 1.1 bar
• PART #1903-0010 includes high-temperature metal film warning decal and adhesive and features grooved edges for grip; pressure rating printed on cap in standard 16 psi and metric 1.1K
• Universal fit for most Hondas, Kawasakis, Suzukis and Yamahas

SAMCO SPORT Radiator Hose Clamp Kit, specific application

• High-performance silicone radiator hose kits
• Each kit features improved flow for better cooling - up to 9 F cooler
• Color-matched to manufacturer's production colors
• Each kit is handcrafted in the UK using the best silicone and fabric reinforcement materials and are 100% visually inspected before leaving the factory
• High-performance clamp kits (sold separately) feature marine-grade 18/8 stainless steel clamps with rounded edges, smooth inners and polished surfaces; contain all clamps necessary to complete installation of radiator hose kit
• Color-matched vacuum tubing also available (sold separately); see page ???

COBRA Replacement Baffle For Cobra Exhaust, 4-Stroke, made in the usa, Steel, Dragsters, size 1.75" x 14.5"

• Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance
• Full-length, 2.5" heat shields with a 222 wraparound for a non-blueing appearance
• Capped with machined and chromed billet tips
• Simple installation
• Repl. baffle PART #1861-0405 measures 1.875" x 14.5"
• Repl. baffle PART #1861-0488 measures 1.75" x 14.5"
• Made in the U.S.A.

AKRAPOVIC Replacement Muffler Clamp For Akropovic Exhausts, 4-Stroke, Titanium, TAC1, specific application

• Replace lost or damaged exhaust parts
• Listed by exhaust PART #
• Sleeve repair kit includes outer sleeve, tapes, rivets and stickers
• Muffler repack kit includes dampening material, tapes, rivets and stickers
• Sold each