Drag Specialties

BARON AIR CLEANER XXX VTX1300, Polished, made in the usa, Aluminum, Big Air, Reusable., specific application, Air Cleaner Kit

• Unleash the beast in your bike
• X-celeration is much quicker, smoother and stronger
• Quicker acceleration means you reach maximum speed in each gear more rapidly
• Kit replaces the stock air cleaner while maintaining the balance and symmetry of your ride
• Custom-made AIRRAID cleanable, reusable air filter provides your bike with increased air volume
• Dyno-designed "AirLoad" manifolds reduce turbulence and increase air velocity, boosting horsepower and torque
• 3-D mesh "X" covers are beautifully stylized
• Machined from T6061 billet aluminum
• Hand-polished with a chrome or black powdercoat finish
• All kits include instructions and all necessary hardware for a complete installation
• Made in the U.S.A.

NOTE: Not legal for street use in CA.

BARON MIXTURE SCREW YAM, made in the usa

• Make adjusting your pilot jet's air/fuel mixture a breeze with this unique finger-turn pilot jet mixture screw
• Allow you to easily adjust air-fuel ratio for weather and altitude
• Enhance fuel efficiency while improving cold start-up and low end performance
• Do away with tiny screwdrivers and crawling around on your knees with this easy-to-operate part
• Sold individually
• Made in the U.S.A.

NOTE: Installation requires removal of mixture plug if your stock mixture screw has not been uncovered.

EBC Mikuni-Style Pilot-Slow Jets 37.5, Natural, Brass, Mikuni, 4-Pack, Pilot Jet

• Brass carburetor jets are high-precision and flow-calibrated for extremely accurate fuel flow rate
• Available in a range of sizes
• High-quality replacements; NOT original Mikuni jets
• Sold to dealers in 4-packs; sold to consumers as each
• Fit all VM, TM and TMS/TMX carburetors
• 13.5mm long
• Sold to dealer in 4-pack; sold to consumer as each
• Fit all RS, HS and HSR carburetors
• 28.1mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit late-model OEM BS CV carburetors
• 14mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit Kawasaki, Suzuki and Yamaha OEM BS CV carburetors
• 14mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit early-style TMS/TMX, TMX36, TMX38 and BSR CV carburetors
• 27.8mm long
• Sold to dealer as 4-pack; sold to consumer as each

MIKUNI RD VM22/210 PILOT JETS

A-BAX PILOT JETS FOR MIKUNI VM28/486

MIKUNI RD N151.067 PILOT JETS (NON-BLEED TYPE)

MIKUNI RD BS30/96 PILOT JETS (BLEED TYPE)

MIKUNI RD N224.103 PILOT JETS

RICK'S MOTORSPORT ELECTRIC GASKET Stator HONDA

• Replacement gaskets for OEM stator gaskets

HOT CAMS VALVE SHIM 5PK 7.48X1.85, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.75, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.70, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.55, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.65, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.60, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.45, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.50, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.40, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.35, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

HOT CAMS VALVE SHIM 5PK 7.48X1.25, made in the usa, Steel, Each, Replacement

• 7.48mm shim kits fit all Japanese 250Fs; include three 7.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 9.48mm shim kits fit all Japanese 450Fs; include three 9.48mm O.D. shims in each size from 1.20mm to 3.50mm in .05 increments
• 8.90mm shim kits fit all KTM motors; include three 8.90mm O.D. shims in each size from 1.72mm to 2.60mm in .04 increments
• 10mm shim kits fit 07 and newer KTM 530, 690 and 990 motors; include three 8.90mm O.D. shims in each size from 1.85mm to 3.20mm in .05 increments
• Refills sold to dealer in 5-pk.; sold to consumer ea.

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

PROX VALVESHIM 7.48X1.20 5PK, 5-pack, Valve Shim Refill Kit

• Made using a specific heat-treatment to ensure hardness for maximum durability and less wear
• Precision machined to match exact size
• Available in complete assortment box as well as 5-pack replacements
• Inexpensive and easy replacement for expensive OEM shims

SHIM KITS FOR HONDA, KAWASAKI, SUZUKI AND YAMAHA

• Kit PART #0926-1018 includes 7.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments
• Kit PART #0926-0941 includes 9.48mm o.d. shims in three of each size from 1.20mm to 3.50mm in .05mm increments

SHIM KITS FOR KTM

• Kit PART #0926-0989 includes 10.00mm o.d. shims in three of each size from 1.85mm to 3.20mm in .05mm increments
• Kit PART #0926-0917 includes 8.90mm o.d. shims in three of each size from 1.72mm to 2.60mm in .04mm increments

KIBBLEWHITE GUIDE VLV IN +.002 KZ1000, Intake, made in the usa, Ampco-45, .002 Oversized, Ea., Valve Guide

• Extensive R D on all applications to provide high-performance components that last longer than OEM
• Black Diamond valves are one-piece forgings made from 21-4N high-performance stainless steel
• Trademarked Black Diamond treatment provides a stem that has a longer life capacity
• All valve guides are made of Ampco-45, a high-performance nickel-bronze material that provides excellent thermal and wear properties
• Super-clean silicon wire used in valve springs is ground, not shaved, and X-rayed at regular intervals to check for flaws
• Titanium retainers are made from 6AL4V titanium alloy; designed to be the strongest and lightest for ultimate performance
• Keepers not included; use OEM keepers and bases, as noted
• Valves and guides are sold each; spring kits come complete for one motor and include instructions
• All components made in the U.S.A.

MUSTANG Honda Fury Solo Wide Touring Seats And Rear Seats, Black, 15 1/2" W, made in the usa, Vintage, Solo Seat

• Mustang wide touring rider and rear seats available separately
• Deeply-pocketed front bucket sits the driver at the ideal cruising angle
• Solo seat comes with or without backrest
• Removable contoured driver backrest pad measures 7" H x 12" W x 1.5" D
• Backrest folds completely forward for ease of getting on motorcycle
• Backrest has rounded thumb screw to adjust forward/back up to 2"
• Backrest easily snaps into four height positions
• Rear seat extends forward to provide ample back support for the driver
• Rear seat features Mustang's unique internal steel support wings to keep the entire width of the molded foam supported
• Rear seats for Honda Fury available with a backrest receiver (backrest sold separately); backrest post is set back an extra 2" for comfortable room
• Made in the U.S.A.

MOOSE RACING Moose Racing Fuel Filter for 1/4" tubing, made in the usa, With 1/4" Fitting

• In line fuel filters for 1/4" and 5/16" i.d. fuel line
• PART #0707-0017 1/4" clear cone shaped with bronze element
• PART #0707-0030 1/4" clear cone shaped with a polyester screen element
• PART #0707-0031 5/16" clear thin wafer shape with stainless screen element
• PART #0707-0040 1/4" clear cone shaped with bronze element and 90 degree elbow
• Sonic-welded housing
• Safe for all fuels

EMGO FUEL LINE 3/16"RNFRCD 25F, Black, 25', Reinforced

• Universal, black fuel/oil line in 25' rolls
• Reinforced line is fuel- and oil-resistant

NOTE: Do not use with fuel containing more than 10% alcohol.

EMGO 6" Chrome Stamped Mirror, Round, glass width 3", mounting diameter 7/8" - 1", Each, specific application, Handlebar Mount, Side Mirror

• Stamped chrome back with 3" mirror provides timeless look
• Fully adjustable for left or right sides
• Clamp-style mirrors will clamp on 7/8" or 1" diameter handlebars with included hardware
• Sold each

NOTE: PART #0640-1015 requires adapter PART #DS-302020 or 0641-0109 to be used on metric motorcycle (sold separately).

POWERMADD/COBRA Black/Black Sentinel Handguards, Plastic, Aluminum, Pair, size of bar 1 1/8", 7/8", Replacement

• Designed to be the most stylish, durable and functional handguards to date
• The Sentinel guard is larger compared to the Star Series which, in turn, provides more protection
• Snow and MX/ATV mounting brackets are 6061 aluminum, while the guard itself is made of two different types of plastic: stiff, two-piece spine for durability and a softer, colored body for flexibility
• Mounts and handguards sold separately
• Permanently attaches to the PowerMadd Sentinel handguards, adding complete 360 protection
• Utilizing the Sentinel's popular style, the Sentinel Armor looks good while doubling the amount of protection
• Constructed of light-weight closed-cell molded AEPE foam, which is both waterproof and extremely durable
• Works with both the Mirror Kit and Hand Wrap

SENTINEL ARMOR

HANDLEBAR ENDS RENTHAL RD, Red

• Ultralight CNC machined from 2011 T3 aluminum
• Each set includes an extra adapter sleeve for mounting in either aluminum (14mm ID) or steel (17mm) handlebars

EMGO 1" Chrome Single Cable Throttle Assembly, Throttle Assembly/Kit

• Complete throttle assemblies with throttle tube
• Available with throttle tension adjuster to aid in those cold morning start-ups
• Chrome or durable painted black finishes; single or dual throttle

GRAB ON Black Street Grips, inside diameter 7/8", made in the usa, Grooved

• Minimum vibration with maximum control
• Tough nitrile PVC foam
• Black only
• Fit 7/8" bars