Mid-USA

Oil Tank Custom Round 3.5 Qts Hardbody St,Rigid & Custom Frames Side Fill W/Bty Box Cp

• These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
• 3.5 quart with battery tray
• Lower left hand relief for use with a chain or belt rear drive
• The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
• Tank body measures 6 ¹/₂ O.D.
• Made from 16 gauge steel to resist cracking
• 100% TIG welded for maximum strength
• Includes heavy duty front mount and fill plug
• Use with Softail size battery and OE style rear tank mount
• Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
• or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Chrome Plated lat Side, Side ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Oil Pressure Gauge Fitting Bt Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036

• Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
• Available to be used with or without the oil pressure sending unit as listed below
• These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
• Oil pressure gauge and sending unit not included
• Oil pressure sending unit found in the engine section

HARDWARE
Anodized Silver Oil Pressure Gauge itting for use with sending unit
Fits Big Twin Evolution, all years

Oil & Fuel Fitting 1/4 Npt X 3/8" Nipple Chrome
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Straight Hose Nipple
¹/₄ NPT Male to ³/₈ Nipple

Oil/Fuel Fitting,1/8" Male Npt To 3/8"Od 90 Degree Hose Nipple Chrome Plated Mfg .2030
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated 90° Hose Nipple
¹/₈ NPT Male to ³/₈ 90° Nipple
Fits FLT 1993/1998 & oil tanks, all models

Oil Fitting,90 Degree Elbow Cp 1/8"Npt Male To Female See *N* Replaces Hd 26338-68..Mfg.2035
HARDWARE
Chrome Plated Oil Line itting
90° elbow with male/female ends
Fits Shovelhead 1968/1984, Big Twin Evolution 1984/1999, FLT 1993/1998
Package of 5
Replaces HD# 26338-68

Oil Pressure Gauge Fitting Kit Big Twin 1970/Later(Ex Tc88) 2 Pieces & O Ring Cp Mfg #2012

• Complete Adapter kits available without oil pressure gauge
• or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
• or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block

HARDWARE
Chrome Plated Adapter
Fits Shovelhead 1970/Later & Big Twin Evolution, all years

Crankcase Plugs Fits Flt,Dyna 1999/L*,Softail 2000/L*, Cp, Oem 765
Colony
Chrome Plated Crankcase Plugs
Replaces HD# 765

Magnetic Drain Plug Stock Styl Fits Bt 2000/L*, 1/2-20 Thread Chrome Plated Hd# 60328-98A

• ¹/₂-20 thread and magnetic

Colony
Chrome Plated Stock Style Drain Plug
Fits Big Twin 2000/Later
Replaces HD# 60328-98A

Magnetic Drain Plug Dome Head Fits Bt 2000/L*, 1/2-20 Thread Chrome Plated Hd# 60328-98A

• ¹/₂-20 thread and magnetic

Colony
Chrome Plated Custom Dome Head Drain Plug
Fits Big Twin 2000/Later
Replaces HD# 60328-98A

Drain Plug,Magnetic W/Washer Flt Mdls 93/00 Dyna 91/00 1/2-20 Rpls Hd 60348-65A,704
Chrome plated drain plugs to fit all necessary thread sizesV-FACTOR
Corrosion Resistant Plate Magnetic Drain Plug, 1/2-20 thread, & Nylon Washer
Fits Dyna 1991/2000
Replaces HD# 704 & 60348-65B
(Imported)

Oil Drain Plug,Chromed Brass Male 1/4" Npt Mfg .2033
Available with your choice of ¹/₈-27 pipe thread (NPT) or ¹/₄-18 NPT as listed. The nipple type fittings are most commonly used on oil tanks, oil pumps, oil filters, oil coolers and fuel applications. The drain plugs are used for custom oil and fuel tanks. HARDWARE
Chrome Plated Hex Head Drain Plug
¹/₄ NPT Male
Package of 5

Air Filter Element S & S E&G Teardrop Housings Performance Element
K&N brand ilter Chargers^® feature a 10-Year/Million-Mile Limited Warranty, are emissions legal in all 50 states and have been made in the USA for over 40 years

POWER HOUSE filter elements are engineered for increased performance, feature a washable and reusable high flow 4-layer cotton element and a urethane body for maximum life and a precise fit. Made in the U.S.A. with U.S.A. components

V-FACTOR blue filter elements are a quality imported product at an affordable price

• These high flow filters are designed to increase performance in both horsepower and throttle response by reducing air flow restriction while maintaining the filtration levels critical to ensure long engine life
• Not only will these filters improve the performance of a stock motorcycle, they are necessary when used in conjunction with performance upgrades such as low restriction exhaust, performance cam(s), carburetor kits or hotter ignition systems
• eatures a pre-oiled cotton/fabric type element that can be washed and re-oiled up to 25 times before it is considered to be no longer serviceable
• or best results when servicing the filter, use our air filter cleaner and filter oil found in the general merchandise section

V-FACTOR
6 O.D. x 2 1/2 width
Fits S & S Super E or G with teardrop cover

Air Cleaner Screw,Chrome Twin Cam 1999/Later* Rpls Hd 29600-00

• Replaces the OE polished air cleaner screw
• Sold each

V-FACTOR
Chrome Air Cleaner Screw
Fits Twin Cam 1999/Later
Replaces HD# 29600-00
(Imported)

EFI Support Bracket,Chrome 2008/Later* Touring Models Uw Custom Air Cleaner

• Replace your unsightly black support bracket with this high quality chrome plated piece
• A must when installing a custom air cleaner

V-FACTOR
Chrome Plated EI Support Bracket
Fits Touring models 2008/Later
Replaces HD# 27712-08

Intake Part,Alum Spacer 1" S & S Super E Carb Move Air Fltr Out To Clear 5 Gal Tanks

• ully CNC machined from solid aircraft quality aluminum
• Designed to move S & S carburetors out far enough for the air cleaner to clear 5 gallon at Bob fuel tanks
• Measures 1 thick

HARDWARE
Fits S & S Super E

Air Filter Part,Screw Kit Cp Most Stock Air Filters Oval Hd Replaces Hd 2402W..Mfg 8212-3
Colony
Chrome Plated slotted oval head screws
Fits various stock air filter applications
⁵/₁₆-24 x ²³/₃₂ long (3 screws)
Replaces HD# 2402W

Hose End, Custom Hex Fits 5/8 Od, 5/16 & 3/8 Id Chrome W/Worm Clamp

• All gas line and oil hose need some type of end clamp, so if you have to clamp it you might as well make it look good
• The circle grooved hose ends are 6061-T6 aluminum and the worm clamps are stainless steel
V-FACTOR
Chrome Finish Hex style
Fits hose with ⁵/₈ O.D., ⁵/₁₆ & ³/₈ I.D.
Package of 6, (Imported)

Fuel/Oil Line End,Grooved Fits Hose 5/8"Od 5/16"&3/8" Id Blue Anodized W/Worm Clamp

• All gas line and oil hose need some type of end clamp, so if you have to clamp it you might as well make it look good
• The circle grooved hose ends are 6061-T6 aluminum and the worm clamps are stainless steel
V-FACTOR
Blue Anodized Grooved style
Fits hose with ⁵/₈ O.D., ⁵/₁₆ & ³/₈ I.D.
Package of 6, (Imported)

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 45 Degree 1/4"Npt 823-06Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
45° to ¹/₄ NPT Adapter

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 45 Degree 1/8"Npt 823-06-02Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
45° to ¹/₈ NPT Adapter

Clp,Oil Line Separator 2 Line Uw/Up To 5/8"Od Bss/Vinyl Hose Ball Milled Billet Alum Cp

• Designed to separate & secure oil lines for a professional look
• CNC machined from billet aluminum for strength
• Works with all types of ⁵/₈ oil lines including braided stainless steel, rubber or vinyl
• Split two piece design for easy installation
• Halves secure with a flush mount allen head screw

V-FACTOR
Chrome Plated Ball Milled 2 Line Separator
Fits ⁵/₈ O.D. oil lines
(Imported)

Clp,Oil Line Separator 3 Line Uw/Up To 5/8"Od Bss/Vinyl Hose Smooth Style Billet Alum Cp

• Designed to separate & secure oil lines for a professional look
• CNC machined from billet aluminum for strength
• Works with all types of ⁵/₈ oil lines including braided stainless steel, rubber or vinyl
• Split two piece design for easy installation
• Halves secure with a flush mount allen head screw

V-FACTOR
Chrome Plated Smooth 3 Line Separator
Fits ⁵/₈ O.D. oil lines
(Imported)

Clp,Oil Line Separator 2 Line Uw/Up To 5/8"Od Bss/Vinyl Hose Smooth Style Billet Alum Cp

• Designed to separate & secure oil lines for a professional look
• CNC machined from billet aluminum for strength
• Works with all types of ⁵/₈ oil lines including braided stainless steel, rubber or vinyl
• Split two piece design for easy installation
• Halves secure with a flush mount allen head screw

V-FACTOR
Chrome Plated Smooth 2 Line Separator
Fits ⁵/₈ O.D. oil lines
(Imported)

Oil Line End, Custom Nickel Fits 3/8" Id Hose To 9/16-18 Male...Goodridge 136-4506E
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for #6 Oil Line and Adapter fittings.

• Ends attach easily yet securely to the oil line
• Steel construction for strength
• Corrosion resistant finish
• The ⁹/₁₆-18 threaded female end is designed to fit with the #6 adapter fittings found in the fuel section (37° sealing taper)

Goodridge
Nickel Plated 45° Bend Line End
(Imported)

Oil Tank Nipple Fitting Cp Uw/Goodridge -6 Oil Hose And Welded-In Tank Fitting
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with -6 (dash six) oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge -6 Oil Line.

• Steel ends attach easily yet securely to the oil line
• Threaded male fittings have a ¹/₈ -27 NPT thread
• The female fitting is designed for oil tanks that incorporate welded-in type oil fittings with a .380 O.D. and a single upset at the end (similar to what is found on 1986/1999 Softail oil tanks)

Goodridge
Chrome Plated Oil Tank Nipple End
(Imported)

Upper Line Seal Big Twin Evolution 1992/1999 Rpls.Hd#63528-92

• OE style kit includes everything needed for bolt-on oil filtration
• Oil filter measures 3 1/2 long and is threaded 3/4-16

V-FACTOR
Upper Line Seal
Fits Big Twin Evolution 1992/1999
Replaces HD# 63528-92
(Imported)

Oil Filter Fitting Big Twin Evolution 1992/1999 Rpls.Hd#63530-92

• OE style kit includes everything needed for bolt-on oil filtration
• Oil filter measures 3 1/2 long and is threaded 3/4-16

V-FACTOR
Chrome Plated Upper Line Fitting
Fits Big Twin Evolution 1992/1999
Replaces HD# 63530-92
(Imported)